實驗環境及軟件版本：
CentOS版本： 6.6(2.6.32.-504.el6.x86_64)
nginx版本： nginx-1.6.3
keepalived版本：keepalived-1.2.7
主LB1：LB-110-05
主LB2：LB-111-06
一、安裝準備及依賴（用SecureCRT的交互窗口同時對兩臺LB操作，只貼出LB1的操作過程在此）
[root@LB-110-05 ~]# mkdir tools
[root@LB-110-05 ~]# mkdir /application
[root@LB-110-05 ~]# yum -y install pcre pcre-devel openssl openssl-devel gcc gcc-c++ make automake popt-devel
[root@LB-110-05 ~]# cd tools
[root@LB-110-05 tools]# tar xf nginx-1.6.3.tar.gz
二、Nginx+keepalived安裝實戰（用SecureCRT的交互窗口同時對兩臺LB操作，只貼出LB1的操作過程在此）
1. 安裝nginx
[root@LB-110-05 tools]# cd nginx-1.6.3
[root@LB-110-05 nginx-1.6.3]# useradd nginx -s /sbin/nologin -M
[root@LB-110-05 nginx-1.6.3]# ./configure --prefix=/application/nginx-1.6.3 --with-http_stub_status_module --with-http_ssl_module --user=nginx --group=nginx
[root@LB-110-05 nginx-1.6.3]# echo $? #檢查上一步操作是否正確，正確返回結果爲0，反之爲1
0
[root@LB-110-05 nginx-1.6.3]# make && make install
[root@LB-110-05 nginx-1.6.3]# ln -s /application/nginx-1.6.3 /application/nginx
[root@LB-110-05 nginx-1.6.3]# /application/nginx/sbin/nginx -t #檢查nginx的語法是否正確和測試是否成功
nginx: the configuration file /application/nginx-1.6.3/conf/nginx.conf syntax is ok
nginx: configuration file /application/nginx-1.6.3/conf/nginx.conf test is successful
[root@LB-110-05 nginx-1.6.3]# /application/nginx/sbin/nginx #啓動nginx服務
[root@LB-110-05 nginx-1.6.3]# netstat -tunlp|grep 80 #檢查nginx服務是否啓動成功
tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 4329/nginx
2. 安裝keepalived
[root@LB-110-05 nginx-1.6.3]# cd..
[root@LB-110-05 tools]# tar xf keepalived-1.2.7.tar.gz
[root@LB-110-05 tools]# cd keepalived-1.2.7
[root@LB-110-05 keepalived-1.2.7]# ./configure
[root@LB-110-05 keepalived-1.2.7]# make && make install
[root@LB-110-05 keepalived-1.2.7]# cp /usr/local/etc/rc.d/init.d/keepalived /etc/rc.d/init.d/
[root@LB-110-05 keepalived-1.2.7]# cp /usr/local/etc/sysconfig/keepalived /etc/sysconfig/
[root@LB-110-05 keepalived-1.2.7]# mkdir /etc/keepalived
[root@LB-110-05 keepalived-1.2.7]# cp /usr/local/etc/keepalived/keepalived.conf /etc/keepalived/
[root@LB-110-05 keepalived-1.2.7]# cp /usr/local/sbin/keepalived /usr/sbin/
3. 加入開機啓動
[root@LB-110-05 ~]# cat >>/etc/rc.local<<EOF
> /usr/local/nginx/sbin/nginx
> /etc/init.d/keepalived start
> EOF
[root@LB-110-05 ~]# cat /etc/rc.local
#!/bin/sh
#
# This script will be executed *after* all the other init scripts.
# You can put your own initialization stuff in here if you don't
# want to do the full Sys V style init stuff.
touch /var/lock/subsys/local
/application/nginx/sbin/nginx
/etc/init.d/keepalived start
三、配置nginx+keepalived
1. 配置nginx
[root@LB-110-05 ~]# cd /application/nginx/conf
[root@LB-110-05 conf]# cp nginx.conf nginx.conf.bak
[root@LB-110-05 conf]# vi nginx.conf
user nginx nginx;
worker_processes 1;
events {
worker_connections 1024;
}
http {
include mime.types;
default_type application/octet-stream;
sendfile on;
keepalive_timeout 65;
upstream myserver{
ip_hash; #用ip哈希算法保持會話
server 10.0.0.7:80 max_fails=3 fail_timeout=20s;
server 10.0.0.8:80 max_fails=3 fail_timeout=20s;
}
server {
listen 80;
server_name 192.168.0.110;
location / {
index index.php index.htm index.html;
proxy_redirect off;
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_next_upstream http_500 http_502 http_503 error timeout invalid_header;
proxy_set_header X-Forwarded-For $remote_addr;
proxy_pass http://myserver;
}
}
}
保存退出，把LB1的nginx.conf配置文件用scp推送到LB2的/application/nginx/conf目錄下就行。
[root@LB-110-05 conf]# /application/nginx/sbin/nginx -t
nginx: the configuration file /application/nginx-1.6.3/conf/nginx.conf syntax is ok
nginx: configuration file /application/nginx-1.6.3/conf/nginx.conf test is successful
[root@LB-110-05 conf]# /application/nginx/sbin/nginx -s reload #平滑重啓nginx,不影響服務使用，提高用戶體驗
[root@LB-110-05 conf]# ps -ef|grep nginx|grep -v grep #檢查nginx服務是否啓動成功
root 4329 1 0 17:08 ? 00:00:00 nginx: master process /application/nginx/sbin/nginx
nginx 6330 4329 0 18:01 ? 00:00:00 nginx: worker process
2. 配置keepalived
2.1 LB1的keepalived配置
[root@LB-110-05 ~]# cp /etc/keepalived/keepalived.conf /etc/keepalived/keepalived.conf.bak
[root@LB-110-05 ~]# vi /etc/keepalived/keepalived.conf
! Configuration File for keepalived
global_defs {
notification_email {
[email protected]
[email protected]
[email protected]
}
notification_email_from [email protected]
smtp_server 192.168.200.1
smtp_connect_timeout 30
router_id Nginx_DEVEL
}
vrrp_instance Nginx_HA1 {
state MASTER
interface eth1
virtual_router_id 51
priority 100
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.0.110/24 dev eth1
}
}
vrrp_instance Nginx_HA2 {
state BACKUP
interface eth1
virtual_router_id 52
priority 99
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.0.111/24 dev eth1
}
}
2.2 LB2的keepalived配置
[root@LB-111-06 ~]# vi /etc/keepalived/keepalived.conf
! Configuration File for keepalived
global_defs {
notification_email {
[email protected]
[email protected]
[email protected]
}
notification_email_from [email protected]
smtp_server 192.168.200.1
smtp_connect_timeout 30
router_id Nginx_DEVEL
}
vrrp_instance Nginx_HA1 {
state BACKUP
interface eth2
virtual_router_id 51
priority 99
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.0.110/24 dev eth2
}
}
vrrp_instance Nginx_HA2 {
state MASTER
interface eth2
virtual_router_id 52
priority 100
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.0.111/24 dev eth2
}
}
3. 啓動keepalived
[root@LB-110-05~]# /etc/init.d/keepalived start #先啓動主LB1
[root@LB-111-06 ~]# /etc/init.d/keepalived start #隨後再啓動主LB2
四、查看服務啓動成功後的結果
[root@LB-110-05 ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:5c:2d:57 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.110/24 brd 192.168.0.255 scope global eth0
inet6 fe80::20c:29ff:fe5c:2d57/64 scope link
valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:5c:2d:61 brd ff:ff:ff:ff:ff:ff
inet 10.0.0.5/24 brd 10.0.0.255 scope global eth1
inet 192.168.0.110/24 scope global eth1
inet6 fe80::20c:29ff:fe5c:2d61/64 scope link
valid_lft forever preferred_lft forever
[root@LB-111-06 ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:50:8e:3a brd ff:ff:ff:ff:ff:ff
inet 192.168.0.111/24 brd 192.168.0.255 scope global eth1
inet6 fe80::20c:29ff:fe50:8e3a/64 scope link
valid_lft forever preferred_lft forever
3: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:50:8e:44 brd ff:ff:ff:ff:ff:ff
inet 10.0.0.6/24 brd 10.0.0.255 scope global eth2
inet 192.168.0.111/24 scope global eth2
inet6 fe80::20c:29ff:fe50:8e44/64 scope link
valid_lft forever preferred_lft forever
五、測試高可用
[root@LB-111-06 ~]# /etc/init.d/keepalived stop
Stopping keepalived: [ OK ]
[root@LB-111-06 ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:50:8e:3a brd ff:ff:ff:ff:ff:ff
inet 192.168.0.111/24 brd 192.168.0.255 scope global eth1
inet6 fe80::20c:29ff:fe50:8e3a/64 scope link
valid_lft forever preferred_lft forever
3: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:50:8e:44 brd ff:ff:ff:ff:ff:ff
inet 10.0.0.6/24 brd 10.0.0.255 scope global eth2
inet6 fe80::20c:29ff:fe50:8e44/64 scope link
valid_lft forever preferred_lft forever
[root@LB-110-05 ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:5c:2d:57 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.110/24 brd 192.168.0.255 scope global eth0
inet6 fe80::20c:29ff:fe5c:2d57/64 scope link
valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:5c:2d:61 brd ff:ff:ff:ff:ff:ff
inet 10.0.0.5/24 brd 10.0.0.255 scope global eth1
inet 192.168.0.110/24 scope global eth1
inet 192.168.0.111/24 scope global secondary eth1
inet6 fe80::20c:29ff:fe5c:2d61/64 scope link
valid_lft forever preferred_lft forever