1環境描述
HP SAN Switch 8/24對應的博科的產品爲:Brocade 4100。
系統中有兩臺HP SAN SWITCH 版本爲:
ApplPrimary/Secondary Versions
------------------------------------------
FOSv6.1.0c
v6.1.0c
序列號:USB902U843和USB902U84N。
存在SSH 方面的BUG,需要升級到最新的微碼。
2升級描述及準備
2.1升級描述
目前Brocade 4100的最新的微碼爲Fabric OSv6.4.3e。
要想升級到Fabric OS v6.4.3e,需要滿足:
Silkworm 3016, 3250, 3850 and Brocade 3900,4100, 4900, 24000, 7500, 7500E, 5000, 200E, 48000 | v5.3.2 (2G and 4G platforms) and v6.1.0e andlater 5 (4G platforms only) |
至少達到v6.1.0e,而目前的版本是v6.1.0c小於該版本,需要先升級到一個過渡版本。
及6.1.X的最終版本:Fabric OS v6.1.2c
Silkworm 3014,3016, 3250, 3850 and Brocade 3900, 4100, 24000, 7500, 7500E, 4012, 200E, 48000 | v5.1 and higher |
1.1升級準備
做好光纖交換機的配置備份。(zone,License)
準備好ftp服務器。
下載好光纖交換機微碼介質。(Fabric OS v6.1.2c和Fabric OS v6.4.3e)
2實施步驟
以下按ftp方式做v6.1.2c微碼升級。
用網絡方式登錄光纖交換機。
把下載的微碼文件解壓,放入ftp服務器的目錄。
firmwaredownload
Server Name orIP Address: 10.3.63.8 à ftp server 地址
User Name: administratorà ftp 賬號
File Name: ./release.plistà升級描述文件
NetworkProtocol(1-auto-select, 2-FTP, 3-SCP) [1]: 2
Password:à密碼
Checkingsystem settings for firmwaredownload...
Protocolselected: FTP
Tryingaddress-->AF_INET IP: 10.3.63.8, flags : 2
Systemsettings check passed.
You can runfirmwaredownloadstatus to get the status of this command.
Thiscommand will cause a warm/non-disruptive boot on the switch,
but willrequire that existing telnet, secure telnet or SSH sessions
berestarted.
Do you wantto continue [Y]: Y –> 確認
Firmware isbeing downloaded to the switch. This step may take up to 30 minutes.
Preparingfor firmwaredownload...
Removingbinutils-libs
Removingbinutils
Removingksymoops
Start toinstall packages...
dir##################################################
ldconfig##################################################
glibc##################################################
glibc-linuxthreads##################################################
bash##################################################
readline##################################################
terminfo##################################################
termcap##################################################
fileutils##################################################
textutils##################################################
setup##################################################
swbd12-setup##################################################
which##################################################
findutils##################################################
bzip##################################################
zlib##################################################
chkconfig##################################################
sed##################################################
procps##################################################
psmisc##################################################
modutils##################################################
sin##################################################
rcinit##################################################
misc##################################################
pam##################################################
util-linux##################################################
sh-utils##################################################
popt##################################################
grep##################################################
rpm##################################################
sysvinit##################################################
man##################################################
less##################################################
gzip##################################################
tar##################################################
rsync##################################################
uuid-libs##################################################
e2fsprogs##################################################
cpio##################################################
dev##################################################
bootenv##################################################
wdtd##################################################
fwdl##################################################
telnet-server##################################################
swbd23-prom##################################################
Pleaseavoid powering off the system during prom update.
kernel##################################################
swbd21-drivers##################################################
sysklogd##################################################
getty##################################################
net-tools##################################################
vixie-cron##################################################
uucp##################################################
portmap##################################################
inetd##################################################
iptables##################################################
tcpd##################################################
rsh-server##################################################
rsh##################################################
openssl-libs##################################################
openssh##################################################
openssh-server##################################################
rusers-server##################################################
rdate##################################################
logrotate##################################################
ntp##################################################
pciutils##################################################
strace##################################################
sendmail##################################################
iproute2##################################################
libxml2##################################################
fss##################################################
fabos-setup##################################################
fabos-drivers##################################################
fabos-libs##################################################
fabos-diag##################################################
fabos##################################################
fabos-zoning##################################################
sqlite##################################################
dhcpcd##################################################
fabos-hmon##################################################
fabos-wwnhs##################################################
fabos-man##################################################
fabos-swbd34##################################################
apache##################################################
fastcgi##################################################
fabos-webtools##################################################
fabos-webtoolsez##################################################
tz##################################################
mtracer-tool##################################################
sysstat##################################################
ipv6##################################################
Removingunneeded files, please wait ...
Finishedremoving unneeded files.
Allpackages have been downloaded successfully.
Firmwarehas been downloaded to the secondary partition of the switch.
HARebooting ...
升級完成後自動重啓。
檢查沒有問題之後按上面的步驟做v6.4.3e的微碼升級。
注意:
升級微碼是不可逆的過程,有一定的風險,提前做好配置的備份。