查看網卡數量
#ifconfig -a|grep eth
第一步:配置網卡配置
#cd /etc/sysconfig/network-scripts/
#vi ifcfg-eth0
DEVICE=eth0
ONBOOT=yes #系統啓動時自動啓用該設備
BOOTPROTO=none #啓動時不使用任何協議
#vi ifcfg-eth1
DEVICE=eth1
ONBOOT=yes #系統啓動時自動啓用該設備
BOOTPROTO=none #啓動時不使用任何協議
#vi ifcfg-bond0
DEVICE=bond0 #虛擬網卡名稱
BOOTPROTO=static
IPADDR=10.141.8.130 #IP地址
NETMASK=255.255.255.0 #子網掩碼
GATEWAY=10.141.8.254 #網關
ONBOOT=yes
TYPE=Ethernet
第二步:配置綁定模式
#cd /etc/modprobe.d/
#vi dist.conf
在後面加入 mode=0是負載模式,mode=1是主備模式
alias bond0 bonding
options bond0 miimon=100 mode=1
第三步:設置開機自動配置雙網卡綁定
#vi /etc/rc.local
加入:
ifenslave bond0 eth0 eth1
第四步:重啓網絡設置
#service network
第五步:關閉Linux防火牆:
執行 service iptables stop
執行 chkconfig iptables off (重啓後不啓動)
第六步:重啓服務器
reboot
第七步:停止守護進程(注:一般操作到第六步後即可實現雙網卡綁定。如果沒有生效,可以嘗試以下步驟!)
#service NetworkManager stop
#chkconfig NetworkManager off
將NM_CONTROLLED改爲no。
查看Selinux狀態
1、/usr/sbin/sestatus -v 如果SELinux status參數爲enabled 即爲開啓狀態
關閉 SELinux:
1、臨時關閉(不用重啓機器)
Setenforce 0 ##設置SELinux成爲permissive模式
Setenforce 1 ##設置SELinux成爲enforcing模式
2、修改配置文件需要重啓機器
修改 /etc/selinux/config 文件
將SELINUX=enfocring改爲SELINUX=disables
配置完成後機器重啓再次驗證
ethtool 網卡驅動 來顯示網卡信息