linux查看硬件信息

             linux查看硬件信息

dmidecode | grep -i 'serial number'//查看主板序列號
dmesg |grep -i MADT  //查看主板芯片

cpu信息
dmidecode -t processor
cat /proc/cpuinfo
dmesg | grep -i 'cpu'

內存信息
dmidecode | grep -i mem
vmstat
dmesg | grep mem
cat /proc/meminfo
free -m

網卡信息
dmesg | grep -i 'eth'
cat /etc/sysconfig/hwconf | grep -i eth
lspci | grep -i 'eth'

顯卡信息
lspci |grep -i 'VGA'
dmesg | grep -i 'VGA'

cat /proc/bus/input/devices //查看鍵盤和鼠標
cat /proc/bus/usb/devices //查看USB設
cat /proc/interrupts //查看各設備的中斷請求(IRQ)
du -chs * //查看當前文件大小及文件總大小

hdparm /dev/sda   //顯示硬盤的柱面、磁頭、扇區數
/dev/sda:
 readonly     =  0 (off)
 readahead    = 256 (on)
 geometry     = 3916/255/63, sectors = 62914560, start = 0

hdparm -t /dev/sda //評估硬盤的讀取效率
/dev/sda:
Timing buffered disk reads:  194 MB in  3.04 seconds =  63.76 MB/sec

hdparm -T /dev/sda   //評估硬盤快取的讀取效率
/dev/sda:
Timing cached reads:   6940 MB in  2.00 seconds = 3473.79 MB/sec

hdparm -C /dev/sda  //檢測IDE硬盤的電源管理模式
/dev/sda:
drive state is:  standby

hdparm -I /dev/hdc //檢測硬盤的硬件規格
/dev/hdc:
 Model=WDC WD3202ABYS-01B7A0, FwRev=02.03B02, SerialNo=WD-WCAT1A093500
 Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq }
 RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=50
 BuffType=unknown, BuffSize=16384kB, MaxMultSect=16, MultSect=16
 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=268435455
 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes:  pio0 pio3 pio4
 DMA modes:  mdma0 mdma1 mdma2
 UDMA modes: udma0 udma1 udma2
 AdvancedPM=no WriteCache=enabled
 Drive conforms to: Unspecified:  ATA/ATAPI-1 ATA/ATAPI-2 ATA/ATAPI-3 ATA/ATAPI-4 ATA/ATAPI-5 ATA/ATAPI-6 ATA/ATAPI-7

 * signifies the current active mode