轉自：https://blog.csdn.net/hqzxsc2006/article/details/50547684
curl的部分時間等變量註釋：
url_effective The URL that was fetched last. This is most meaningful if you've told curl to follow location: headers.
filename_effective The ultimate filename that curl writes out to. This is only meaningful if curl is told to write to a file with the --remote-name or --output option. It's most useful in combination with the --remote-header-name option. (Added in 7.25.1)
http_code http狀態碼，如200成功,301轉向,404未找到,500服務器錯誤等。(The numerical response code that was found in the last retrieved HTTP(S) or FTP(s) transfer. In 7.18.2 the alias response_code was added to show the same info.)
http_connect The numerical code that was found in the last response (from a proxy) to a curl CONNECT request. (Added in 7.12.4)
time_total 總時間，按秒計。精確到小數點後三位。 （The total time, in seconds, that the full operation lasted. The time will be displayed with millisecond resolution.）
time_namelookup DNS解析時間,從請求開始到DNS解析完畢所用時間。(The time, in seconds, it took from the start until the name resolving was completed.)
time_connect 連接時間,從開始到建立TCP連接完成所用時間,包括前邊DNS解析時間，如果需要單純的得到連接時間，用這個time_connect時間減去前邊time_namelookup時間。以下同理，不再贅述。(The time, in seconds, it took from the start until the TCP connect to the remote host (or proxy) was completed.)
time_appconnect 連接建立完成時間，如SSL/SSH等建立連接或者完成三次握手時間。(The time, in seconds, it took from the start until the SSL/SSH/etc connect/handshake to the remote host was completed. (Added in 7.19.0))
time_pretransfer 從開始到準備傳輸的時間。(The time, in seconds, it took from the start until the file transfer was just about to begin. This includes all pre-transfer commands and negotiations that are specific to the particular protocol(s) involved.)
time_redirect 重定向時間，包括到最後一次傳輸前的幾次重定向的DNS解析，連接，預傳輸，傳輸時間。(The time, in seconds, it took for all redirection steps include name lookup, connect, pretransfer and transfer before the final transaction was started. time_redirect shows the complete execution time for multiple redirections. (Added in 7.12.3))
time_starttransfer 開始傳輸時間。在client發出請求之後，Web 服務器返回數據的第一個字節所用的時間(The time, in seconds, it took from the start until the first byte was just about to be transferred. This includes time_pretransfer and also the time the server needed to calculate the result.)
size_download 下載大小。(The total amount of bytes that were downloaded.)
size_upload 上傳大小。(The total amount of bytes that were uploaded.)
size_header 下載的header的大小(The total amount of bytes of the downloaded headers.)
size_request 請求的大小。(The total amount of bytes that were sent in the HTTP request.)
speed_download 下載速度，單位-字節每秒。(The average download speed that curl measured for the complete download. Bytes per second.)
speed_upload 上傳速度,單位-字節每秒。(The average upload speed that curl measured for the complete upload. Bytes per second.)
content_type 就是content-Type，不用多說了，這是一個訪問我博客首頁返回的結果示例(text/html; charset=UTF-8)；(The Content-Type of the requested document, if there was any.)
num_connects Number of new connects made in the recent transfer. (Added in 7.12.3)
num_redirects Number of redirects that were followed in the request. (Added in 7.12.3)
redirect_url When a HTTP request was made without -L to follow redirects, this variable will show the actual URL a redirect would take you to. (Added in 7.18.2)
ftp_entry_path The initial path libcurl ended up in when logging on to the remote FTP server. (Added in 7.15.4)
ssl_verify_result ssl認證結果，返回0表示認證成功。( The result of the SSL peer certificate verification that was requested. 0 means the verification was successful. (Added in 7.19.0))
1、可以直接訪問使用：
#curl -o /dev/null -s -w %{http_code}:%{http_connect}:%{content_type}:%{time_namelookup}:%{time_redirect}:%{time_pretransfer}:%{time_connect}:%{time_starttransfer}:%{time_total}:%{speed_download} www.baidu.com
輸出變量需要按照%{variable_name}的格式，如果需要輸出%，double一下即可，即%%，同時，\n是換行，\r是回車，\t是TAB。
-w 指定格式化文件-o 請求重定向到,不帶此參數則控制檯輸出返回結果-s 靜默，不顯示進度
2、也可以定義時間格式化文件訪問
#vim curl-time.txt
\n
http: %{http_code}\n
dns: %{time_namelookup}s\n
redirect: %{time_redirect}s\n
time_connect: %{time_connect}s\n
time_appconnect: %{time_appconnect}s\n
time_pretransfer: %{time_pretransfer}s\n
time_starttransfer: %{time_starttransfer}s\n
size_download: %{size_download}bytes\n
speed_download: %{speed_download}B/s\n
----------\n
time_total: %{time_total}s\n
\n#curl -w "@curl_time.txt" -s -H "Content-Type: application/json" --insecure --header 'Host: passport.500.com' --data '{"platform":"android","userimei":"F5D815EA2BD8DBARD","app_channel":"10000","mbimei":"9DB358AF","version":"3.1.4","username":"hqzx","userpass":"976af4"}' --compressed https://119.147.113.177/user/login
3、curl以post請求方法
1）以json格式數據
#curl -H "Content-Type: application/json" -X POST --data '{"data":"1"}' http://127.0.0.1/
2）以&連接參數數據#curl -d "data=7778a8143f111272&score=19&app_key=8d49f16fe034b98b&_test_user=test01" "http://127.0.0.1"3) 附帶文本數據，比如通過"瀏覽"選擇本地的card.txt並上傳發送post請求，其中-F 爲帶文件的形式發送post請求， blob爲文本框中的name元素對應的屬性值。<type="text" name="blob">#curl -F "[email protected];type=text/plain" "http://172.16.102.208:8089/wiapi/score?leaderboard_id=7778a8143f111272&score=40&app_key=8d49f16fe034b98b&_test_user=test01" 安卓手機可以通過安裝終端模擬器，然後在模擬器按以上方法使用curl調試定位app在移動數據網絡環境下哪個環節出現慢的問題。
---------------------