使用Zabbix監控ZooKeeper服務的健康狀態

原創 拎壺沖沖衝 2019-02-20 12:53

一 應用場景描述

在目前公司的業務中，沒有太多使用ZooKeeper作爲協同服務的場景。但是我們將使用Codis作爲Redis的集羣部署方案，Codis依賴ZooKeeper來存儲配置信息。所以做好ZooKeeper的監控也很重要。

二 ZooKeeper監控要點

系統監控

內存使用量 ZooKeeper應當完全運行在內存中，不能使用到SWAP。Java Heap大小不能超過可用內存。

Swap使用量 使用Swap會降低ZooKeeper的性能，設置vm.swappiness = 0

網絡帶寬佔用 如果發現ZooKeeper性能降低關注下網絡帶寬佔用情況和丟包情況，通常情況下ZooKeeper是20%寫入80%讀入

磁盤使用量 ZooKeeper數據目錄使用情況需要注意

磁盤I/O ZooKeeper的磁盤寫入是異步的，所以不會存在很大的I/O請求，如果ZooKeeper和其他I/O密集型服務公用應該關注下磁盤I/O情況

ZooKeeper監控

zk_avg/min/max_latency 響應一個客戶端請求的時間，建議這個時間大於10個Tick就報警

zk_outstanding_requests 排隊請求的數量，當ZooKeeper超過了它的處理能力時，這個值會增大，建議設置報警閥值爲10

zk_packets_received 接收到客戶端請求的包數量

zk_packets_sent 發送給客戶單的包數量，主要是響應和通知

zk_max_file_descriptor_count 最大允許打開的文件數，由ulimit控制

zk_open_file_descriptor_count 打開文件數量，當這個值大於允許值得85%時報警

Mode 運行的角色，如果沒有加入集羣就是standalone,加入集羣式follower或者leader

zk_followers leader角色纔會有這個輸出,集合中follower的個數。正常的值應該是集合成員的數量減1

zk_pending_syncs leader角色纔會有這個輸出，pending syncs的數量

zk_znode_count znodes的數量

zk_watch_count watches的數量

Java Heap Size ZooKeeper Java進程的

#echo ruok|nc 127.0.0.1 2181
imok

#echo mntr|nc 127.0.0.1 2181
zk_version 3.4.6-1569965, built on 02/20/2014 09:09 GMT
zk_avg_latency 0
zk_max_latency 0
zk_min_latency 0
zk_packets_received 11
zk_packets_sent 10
zk_num_alive_connections 1
zk_outstanding_requests 0
zk_server_state leader
zk_znode_count 17159
zk_watch_count 0
zk_ephemerals_count 1
zk_approximate_data_size 6666471
zk_open_file_descriptor_count 29
zk_max_file_descriptor_count 102400
zk_followers 2
zk_synced_followers 2
zk_pending_syncs 0

#echo srvr|nc 127.0.0.1 2181
Zookeeper version: 3.4.6-1569965, built on 02/20/2014 09:09 GMT
Latency min/avg/max: 0/0/0
Received: 26
Sent: 25
Connections: 1
Outstanding: 0
Zxid: 0x500000000
Mode: leader
Node count: 17159

三 編寫Zabbix監控ZooKeeper的腳本和配置文件

要讓Zabbix收集到這些監控數據，有兩種方法一種是每個監控項目通過zabbix agent單獨獲取，主動監控和被動監控都可以。還有一種方法就是將這些監控數據一次性使用zabbix_sender全部發送給zabbix。這裏我們選擇第二種方式。那麼採用zabbix_sender一次性發送全部監控數據的腳本就不能像通過zabbix agent這樣逐個獲取監控項目來編寫腳本。

首先想辦法將監控項目彙集成一個字典，然後遍歷這個字典，將字典中的key:value對通過zabbix_sender的-k和-o參數指定發送出去

echo mntr|nc 127.0.0.1 2181

這條命令可以使用Python的subprocess模塊調用，也可以使用socket模塊去訪問2181端口然後發送命令獲取數據，獲取到mntr執行的數據後還需要將其轉化成爲字典數據

即需要將這種樣式的數據

zk_version 3.4.6-1569965, built on 02/20/2014 09:09 GMT
zk_avg_latency 0
zk_max_latency 0
zk_min_latency 0
zk_packets_received 91
zk_packets_sent 90
zk_num_alive_connections 1
zk_outstanding_requests 0
zk_server_state follower
zk_znode_count 17159
zk_watch_count 0
zk_ephemerals_count 1
zk_approximate_data_size 6666471
zk_open_file_descriptor_count 27
zk_max_file_descriptor_count 102400

轉換成爲這樣的數據

{'zk_followers': 2, 'zk_outstanding_requests': 0, 'zk_approximate_data_size': 6666471, 'zk_packets_sent': 2089, 'zk_pending_syncs': 0, 'zk_avg_latency': 0, 'zk_version': '3.4.6-1569965, built on 02/20/2014 09:09 GMT', 'zk_watch_count': 2, 'zk_packets_received': 2090, 'zk_open_file_descriptor_count': 30, 'zk_server_ruok': 'imok', 'zk_server_state': 'leader', 'zk_synced_followers': 2, 'zk_max_latency': 28, 'zk_num_alive_connections': 2, 'zk_min_latency': 0, 'zk_ephemerals_count': 1, 'zk_znode_count': 17159, 'zk_max_file_descriptor_count': 102400}

到最後需要使用zabbix_sender發送的數據格式這個樣子的

zookeeper.status[zk_version]這是key的名稱

zookeeper.status[zk_outstanding_requests]:0
zookeeper.status[zk_approximate_data_size]:6666471
zookeeper.status[zk_packets_sent]:48
zookeeper.status[zk_avg_latency]:0
zookeeper.status[zk_version]:3.4.6-1569965, built on 02/20/2014 09:09 GMT
zookeeper.status[zk_watch_count]:0
zookeeper.status[zk_packets_received]:49
zookeeper.status[zk_open_file_descriptor_count]:27
zookeeper.status[zk_server_ruok]:imok
zookeeper.status[zk_server_state]:follower
zookeeper.status[zk_max_latency]:0
zookeeper.status[zk_num_alive_connections]:1
zookeeper.status[zk_min_latency]:0
zookeeper.status[zk_ephemerals_count]:1
zookeeper.status[zk_znode_count]:17159
zookeeper.status[zk_max_file_descriptor_count]:102400

精簡代碼如下：

#!/usr/bin/python
import socket
#from StringIO import StringIO
from cStringIO import StringIO
s=socket.socket()
s.connect(('localhost',2181))
s.send('mntr')
data_mntr=s.recv(2048)
s.close()
#print data_mntr
h=StringIO(data_mntr)
result={}
zresult={}
for line in h.readlines():
key,value=map(str.strip,line.split('\t'))
zkey='zookeeper.status' + '[' + key + ']'
zvalue=value
result[key]=value
zresult[zkey]=zvalue
print result
print '\n\n'
print zresult
#python test.py
{'zk_outstanding_requests': '0', 'zk_approximate_data_size': '6666471', 'zk_max_latency': '0', 'zk_avg_latency': '0', 'zk_version': '3.4.6-1569965, built on 02/20/2014 09:09 GMT', 'zk_watch_count': '0', 'zk_num_alive_connections': '1', 'zk_open_file_descriptor_count': '27', 'zk_server_state': 'follower', 'zk_packets_sent': '542', 'zk_packets_received': '543', 'zk_min_latency': '0', 'zk_ephemerals_count': '1', 'zk_znode_count': '17159', 'zk_max_file_descriptor_count': '102400'}

{'zookeeper.status[zk_watch_count]': '0', 'zookeeper.status[zk_avg_latency]': '0', 'zookeeper.status[zk_max_latency]': '0', 'zookeeper.status[zk_approximate_data_size]': '6666471', 'zookeeper.status[zk_server_state]': 'follower', 'zookeeper.status[zk_num_alive_connections]': '1', 'zookeeper.status[zk_min_latency]': '0', 'zookeeper.status[zk_outstanding_requests]': '0', 'zookeeper.status[zk_packets_received]': '543', 'zookeeper.status[zk_ephemerals_count]': '1', 'zookeeper.status[zk_znode_count]': '17159', 'zookeeper.status[zk_packets_sent]': '542', 'zookeeper.status[zk_open_file_descriptor_count]': '27', 'zookeeper.status[zk_max_file_descriptor_count]': '102400', 'zookeeper.status[zk_version]': '3.4.6-1569965, built on 02/20/2014 09:09 GMT'}

詳細代碼如下：

#!/usr/bin/python

""" Check Zookeeper Cluster

zookeeper version should be newer than 3.4.x

#echo mntr|nc 127.0.0.1 2181
zk_version 3.4.6-1569965, built on 02/20/2014 09:09 GMT
zk_avg_latency 0
zk_max_latency 4
zk_min_latency 0
zk_packets_received 84467
zk_packets_sent 84466
zk_num_alive_connections 3
zk_outstanding_requests 0
zk_server_state follower
zk_znode_count 17159
zk_watch_count 2
zk_ephemerals_count 1
zk_approximate_data_size 6666471
zk_open_file_descriptor_count 29
zk_max_file_descriptor_count 102400

#echo ruok|nc 127.0.0.1 2181
imok

"""

import sys
import socket
import re
import subprocess
from StringIO import StringIO
import os

zabbix_sender = '/opt/app/zabbix/sbin/zabbix_sender'
zabbix_conf = '/opt/app/zabbix/conf/zabbix_agentd.conf'
send_to_zabbix = 1

############# get zookeeper server status
class ZooKeeperServer(object):

def __init__(self, host='localhost', port='2181', timeout=1):
    self._address = (host, int(port))
    self._timeout = timeout
    self._result  = {}

def _create_socket(self):
    return socket.socket()

def _send_cmd(self, cmd):
    """ Send a 4letter word command to the server """
    s = self._create_socket()
    s.settimeout(self._timeout)

    s.connect(self._address)
    s.send(cmd)

    data = s.recv(2048)
    s.close()

    return data

def get_stats(self):
    """ Get ZooKeeper server stats as a map """
    data_mntr = self._send_cmd('mntr')
    data_ruok = self._send_cmd('ruok')
    if data_mntr:
        result_mntr = self._parse(data_mntr)
    if data_ruok:
        result_ruok = self._parse_ruok(data_ruok)

    self._result = dict(result_mntr.items() + result_ruok.items())

    if not self._result.has_key('zk_followers') and not self._result.has_key('zk_synced_followers') and not self._result.has_key('zk_pending_syncs'):

       ##### the tree metrics only exposed on leader role zookeeper server, we just set the followers' to 0
       leader_only = {'zk_followers':0,'zk_synced_followers':0,'zk_pending_syncs':0}    
       self._result = dict(result_mntr.items() + result_ruok.items() + leader_only.items() )

    return self._result  

def _parse(self, data):
    """ Parse the output from the 'mntr' 4letter word command """
    h = StringIO(data)

    result = {}
    for line in h.readlines():
        try:
            key, value = self._parse_line(line)
            result[key] = value
        except ValueError:
            pass # ignore broken lines

    return result

def _parse_ruok(self, data):
    """ Parse the output from the 'ruok' 4letter word command """

    h = StringIO(data)

    result = {}

    ruok = h.readline()
    if ruok:
       result['zk_server_ruok'] = ruok

    return result

def _parse_line(self, line):
    try:
        key, value = map(str.strip, line.split('\t'))
    except ValueError:
        raise ValueError('Found invalid line: %s' % line)

    if not key:
        raise ValueError('The key is mandatory and should not be empty')

    try:
        value = int(value)
    except (TypeError, ValueError):
        pass

    return key, value

def get_pid(self):

#ps -ef|grep java|grep zookeeper|awk '{print $2}'
pidarg = '''ps -ef|grep java|grep zookeeper|grep -v grep|awk '{print $2}' '''
pidout = subprocess.Popen(pidarg,shell=True,stdout=subprocess.PIPE)
pid = pidout.stdout.readline().strip('\n')
return pid

def send_to_zabbix(self, metric):
     key = "zookeeper.status[" +  metric + "]"

     if send_to_zabbix > 0:
         #print key + ":" + str(self._result[metric])
         try:

            subprocess.call([zabbix_sender, "-c", zabbix_conf, "-k", key, "-o", str(self._result[metric]) ], stdout=FNULL, stderr=FNULL, shell=False)
         except OSError, detail:
            print "Something went wrong while exectuting zabbix_sender : ", detail
     else:
            print "Simulation: the following command would be execucted :\n", zabbix_sender, "-c", zabbix_conf, "-k", key, "-o", self._result[metric], "\n"

def usage():
"""Display program usage"""

    print "\nUsage : ", sys.argv[0], " alive|all"
    print "Modes : \n\talive : Return pid of running zookeeper\n\tall : Send zookeeper stats as well"
    sys.exit(1)

accepted_modes = ['alive', 'all']

if len(sys.argv) == 2 and sys.argv[1] in accepted_modes:
mode = sys.argv[1]
else:
usage()

zk = ZooKeeperServer()
#print zk.get_stats()
pid = zk.get_pid()

if pid != "" and mode == 'all':
zk.get_stats()
#print zk._result
FNULL = open(os.devnull, 'w')
for key in zk._result:
zk.send_to_zabbix(key)
FNULL.close()
print pid

elif pid != "" and mode == "alive":
print pid
else:
print 0

zabbix配置文件check_zookeeper.conf

UserParameter=zookeeper.status[*],/usr/bin/python /opt/app/zabbix/sbin/check_zookeeper.py $1

重啓agentd完成監控

此文章不作爲你們參考，自己的做法還沒有時間整理。後邊在說。

發表評論
所有評論
還沒有人評論，想成為第一個評論的人麼? 請在上方評論欄輸入並且點擊發布.
相關文章

zookeeper命令使用及監控

老逗先生 2018-09-10 03:25:52

taokeeper 架設與部署

hackerwin7 2018-08-22 05:09:53

Zabbix隨心所欲監控ZooKeeper一篇就夠了

拎壺沖沖衝 2020-05-31 20:03:36

整理Zabbix監控 WEB

拎壺沖沖衝 2019-05-01 00:53:07

Warning: Using a password on the command line inte

拎壺沖沖衝 2019-04-20 12:59:24

線上zabbix監控redis和redis集羣

拎壺沖沖衝 2018-11-16 02:02:15

zabbix自發現實時監控docker容器及容器中各個服務的狀態線上業務展示

拎壺沖沖衝 2018-11-03 02:02:45

利用ZABBIX全面監控MongoDB數據庫

拎壺沖沖衝 2018-10-10 02:02:32

記錄一次zabbix監控常見系統層面問題排查方法

拎壺沖沖衝 2018-09-27 02:02:42

ZABBIX最全MYSQL自定義監控多實例mysql與主從複製狀態沒有之一

拎壺沖沖衝 2018-09-18 02:02:15

zabbix監控的微信報警設置線上落地經驗

拎壺沖沖衝 2018-09-10 04:29:05

分佈式監控系統Zabbix使用percona監控MySQL

拎壺沖沖衝 2018-09-10 04:29:05

python利用zabbix API添加監控

拎壺沖沖衝 2018-09-10 04:29:00

Zabbix 調用API 批量添加主機等

拎壺沖沖衝 2018-09-10 04:29:00

zabbix監控nginx和fpm（網站併發數）自定義key

拎壺沖沖衝 2018-09-10 04:29:00