Mysql主備配置
說明
Mysql服務器爲linux系統(如centOS5.8),運行PAVLL軟件發佈包中install.sh 文件後可選擇安裝mysql,安裝版本爲5.5.27。
mysql服務器1:192.168.12.33 下文簡稱A33
mysql服務器2:192.168.1.13 下文簡稱B13
下文中先配置A33做爲主用機數據同步到作爲備用機B13,後配置B13上數據同步到A33,使得A33和B13互爲主備。
一 準備
1,修改A33和B13的iptables服務(防火牆)開放Mysql端口3306允許遠程訪問
①修改防火牆配置文件 #vi /etc/sysconfig/iptables
增加下面一行:-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 3306 -j ACCEPT
②配置後,重新啓動iptable服務# service iptables restart
2,A33和B13均開放mysql遠程互訪問權限,可互相訪問對方mysql程序
①進入mysql #mysql -h localhost -u root ②賦予任何主機使用root/123456訪問mysql的權限 mysql>GRANT ALL PRIVILEGES ON *.* TO 'root'@'%'IDENTIFIED BY '123456' WITH GRANT OPTION 出於安全考慮一般對特定IP開放權限: GRANT ALL PRIVILEGES ON *.* TO 'root'@'192.168.1.13'IDENTIFIED BY '123456' WITH GRANT OPTION; ③使修改生效 mysql>FLUSH PRIVILEGES;
3,A33和B13的手動同步database,其中testd:testa,testb,notify ;testc:testc
①在A33上,導出database
#mysqldump --user="root" --password=123456 --host=localhost testa > testa.sql; #mysqldump --user="root" --password=123456 --host=localhost testb > testb.sql; #mysqldump --user="root" --password=123456 --host=localhost notify > notify.sql; #mysqldump --user="root" --password=123456 --host=localhost testc > testc.sql;
②在B13上,刪除其原來testd和testc使用的database
#mysql --user=root --password=123456 --host=localhost --execute="drop database if exists testa;CREATE DATABASE testa"; #mysql --user=root --password=123456 --host=localhost --execute="drop database if exists testb;CREATE DATABASE testb"; #mysql --user=root --password=123456 --host=localhost --execute="drop database if exists notify;CREATE DATABASE notify"; #mysql --user=root --password=123456 --host=localhost --execute="drop database if exists testc;CREATE DATABASE testc";
③將①中導出的文件拷貝到B13上,然後在B13上導入該數據庫文件
#mysql --user=root --password=123456 --host=localhost testa < testa.sql; #mysql --user=root --password=123456 --host=localhost testb < testb.sql; #mysql --user=root --password=123456 --host=localhost notify < notify.sql; #mysql --user=root --password=123456 --host=localhost testc < testc.sql;
注:運行命令的文件目錄爲存放數據文件的目錄
二 主mysql服務器(如A33)配置
1,進入mysql後創建一個複製用戶,具有replication slave權限.
mysql>grant replication slave on *.* to 'testdbakup'@'192.168.1.13' identified by '123456';
2, 拷貝生成my.cnf文件
#cp /usr/share/mysql/my-medium.cnf /etc/my.cnf
3,編輯my.cnf文件#vi /etc/my.cnf 注意以下內容
server-id=1 (默認就有,保持註釋server-id=2) log-bin=mysql-bin(默認就有) binlog-do-db=testc (按需增加) binlog-do-db=testa (按需增加) binlog-do-db=testb (按需增加) binlog-do-db=notify (按需增加)
保存修改後重啓mysql服務 # service mysql restart
4,
mysql>show master status;記錄下File和position,從服務器的設置裏會用到該參數. +--------------------------+-------------+---------------------+----------------------------+ | File | Position | Binlog_Do_DB| Binlog_Ignore_DB | +--------------------------+-------------+---------------------+----------------------------+ | mysql-bin.000004 | 107 | testc | | +---------------------------+------------+---------------------+----------------------------+
三 備用mysql服務器(如B13)設置
1,拷貝生成my.cnf文件
#cp /usr/share/mysql/my-medium.cnf /etc/my.cnf
2,編輯my.cnf文件vi /etc/my.cnf含有以下內容
server-id=2 (默認爲註釋,需修改) 把默認的server-id=1註釋掉
3,change master
重啓動mysql數據庫
# service mysql restart mysql>stop slave; mysql>change master to master_host='192.168.12.33',master_user='testdbakup',master_password='123456',ma ster_log_file='mysql-bin.000004',master_log_pos=107 ; mysql>start slave;
4,檢驗配置成功
①mysql>show processlist\G; *************************** 3. row *************************** Id: 10 User: system user Host: db: NULL Command: Connect Time: 380 State: Slave has read all relay log; waiting for the slave I/O thread to update it Info: NULL 看到以上數據則表示爲進程正常啓動
②
mysql>show slave status\G;(以下爲正常數據) *************************** 1. row *************************** Slave_IO_State: Waiting for master to send event Master_Host: 192.168.12.33 Master_User: testdbakup Master_Port: 3306 Connect_Retry: 60 Master_Log_File: mysql-bin.000007 Read_Master_Log_Pos: 228 Relay_Log_File: localhost-relay-bin.000002 Relay_Log_Pos: 374 Relay_Master_Log_File: mysql-bin.000007 Slave_IO_Running: Yes Slave_SQL_Running: Yes Replicate_Do_DB: Replicate_Ignore_DB: Replicate_Do_Table: Replicate_Ignore_Table: Replicate_Wild_Do_Table: Replicate_Wild_Ignore_Table: Last_Errno: 0 Last_Error: Skip_Counter: 0 Exec_Master_Log_Pos: 228 Relay_Log_Space: 534 Until_Condition: None Until_Log_File: Until_Log_Pos: 0 Master_SSL_Allowed: No Master_SSL_CA_File: Master_SSL_CA_Path: Master_SSL_Cert: Master_SSL_Cipher: Master_SSL_Key: Seconds_Behind_Master: 0 Master_SSL_Verify_Server_Cert: No Last_IO_Errno: 0 Last_IO_Error: Last_SQL_Errno: 0 Last_SQL_Error: Replicate_Ignore_Server_Ids: Master_Server_Id: 1 1 row in set (0.00 sec) ERROR: No query specified
四 配置備用mysql(如B13)的數據同步到主機mysql(A33)
如果做該設置,則2個mysql服務器則互爲主備配置,雙向同步數據
在 B13上設置
1,編輯/etc/my.cnf
其中保持server-id=2 按需添加binlog-do-db=testc binlog-do-db=testa binlog-do-db=testb binlog-do-db=notify 保存修改完後重啓mysql服務:# service mysql restart
2,爲A33創建備份用戶並授權
mysql>grant replication slave on *.* to 'testdbakup'@'192.168.12.33' identified by '123456'; 3,mysql>show master status;記錄下File和position,A33的設置裏會用到該參數. +--------------------------+-------------+---------------------+----------------------------+ | File | Position | Binlog_Do_DB| Binlog_Ignore_DB | +--------------------------+-------------+---------------------+----------------------------+ | mysql-bin.000005 | 107 | testc | | +---------------------------+------------+---------------------+----------------------------+
在A33上設置:
mysql>stop slave; mysql>change master to master_host='192.168.1.13',master_user='testdbakup',master_password='123456',master_log_file='mysql-bin.000005',master_log_pos=107 ; mysql>start slave;(同上) mysql>show processlist\G;(同上) mysql>show slave status\G;(同上)
互爲主備配置檢測:
在任一端mysql的testd或testc的database中的表中新增,刪除,修改數據,然後查看另一端mysql對應表的數據是否一致。如是則說明數據同步成功主備設置成功。
五F&Q
1 偶現主備數據庫所在機器重啓後數據庫不同步()
mysql的同步依賴其Slave_IO_Running和Slave_SQL_Running服務,當這兩個服務有任意一個都會導致數據無法同步。據大多數mysql同步案例來看,當mysql所在服務器由於宕機、斷電等因素重啓後,mysql依賴的同步服務可以會出現無法正常運行的情況。手動配置兩個服務運行後,可恢復同步。未同步的歷史數據也會被處理掉。
詳見http://www.jb51.net/article/27220.htm
JIRA上已有問題單(NANGA-377)跟蹤:http://192.168.1.119:8080/browse/NANGA-377
Error Code: 1005 -- there is a wrong primary key reference in your code
表的字符集不一致,主外鍵會失敗