Nginx ("engine x") 是一個高性能的 HTTP 和反向代理服務器,也是一個 IMAP/POP3/SMTP 代理服務器。 Nginx 是由 Igor Sysoev 爲俄羅斯訪問量第二的 Rambler.ru 站點開發的,它已經在該站點運行超過兩年半了。Igor 將源代碼以類BSD許可證的形式發佈。
Nginx 的中文維基:http://wiki.codemongers.com/NginxChs
在高併發連接的情況下,Nginx是Apache服務器不錯的替代品。Nginx同時也可以作爲7層負載均衡服務器來使用。根據我的測試結果,Nginx 0.5.31 + PHP 5.2.4 (FastCGI) 可以承受3萬以上的併發連接數,相當於同等環境下Apache的10倍。
以下是 Nginx 0.5.31 + PHP 5.2.4 (FastCGI) 服務器在3萬併發連接下的TCP狀況:
各種狀態TCP連接數如下(各項值所代表的含義見我的另一篇文章《查看Apache併發請求數及其TCP連接狀態》):
SYN_RECV 991
CLOSE_WAIT 1
ESTABLISHED 18789
FIN_WAIT1 1478
FIN_WAIT2 181
TIME_WAIT 506
根據我的經驗,4GB內存的服務器+Apache(prefork模式)一般只能處理3000個併發連接,因爲它們將佔用3GB以上的內存,還得爲系統預留1GB的內存。我曾經就有兩臺Apache服務器,因爲在配置文件中設置的MaxClients爲4000,當Apache併發連接數達到3800時,導致服務器內存和Swap空間用滿而崩潰。
而這臺 Nginx 0.5.31 + PHP 5.2.4 (FastCGI) 服務器在3萬併發連接下,開啓的10個Nginx進程消耗100M內存(20MB*10=100M),開啓的250個php-cgi進程消耗1G內存(4MB*250≈1GB),加上系統自身消耗的內存,總共才消耗2GB內存。如果服務器內存較小,完全可以只開啓25個php-cgi進程,這樣php-cgi消耗的總內存數才100M。在開啓25個php-cgi進程的情況下,每分鐘的處理能力只比開啓250個php-cgi進程時低了不到一半。
以下爲 Nginx 0.5.31 + PHP 5.2.4 (FastCGI) 服務器在3萬併發連接下,開啓的10個Nginx進程和250個php-cgi進程時的系統負載情況:
安裝步驟:
(系統要求:Linux 2.6+ 內核,本文中的Linux操作系統爲CentOS 4.4)
一、獲取相關開源程序:
1、下載程序源碼包到當前目錄:
本文中提到的所有開源軟件爲截止到2007年9月21日的最新穩定版。我將它們打了兩個壓縮包。
第一個壓縮包:nginx_php_mysql_1.0_1of2.zip:
下載地址:http://ishare.iask.sina.com.cn/cgi-bin/fileid.cgi?fileid=2289607
第二個壓縮包:nginx_php_mysql_1.0_2of2.zip:
下載地址:http://ishare.iask.sina.com.cn/cgi-bin/fileid.cgi?fileid=2289595
2、解壓縮:
unzip nginx_php_mysql_1.0_2of2.zip
二、安裝PHP 5.2.4(FastCGI模式)
1、編譯安裝PHP 5.2.4所需的支持庫:
cd libiconv-1.11/
./configure --prefix=/usr/local/webserver/lib/libiconv
make && make install
cd ../
tar zxvf freetype-2.3.5.tar.gz
cd freetype-2.3.5/
./configure --prefix=/usr/local/webserver/lib/freetype
make && make install
cd ../
tar zxvf libpng-1.2.20.tar.gz
cd libpng-1.2.20/
./configure
make && make install
cd ../
tar zxvf jpegsrc.v6b.tar.gz
cd jpeg-6b/
./configure --enable-static --enable-shared
make && make install
cd ../
tar zxvf gd-2.0.35.tar.gz
cd gd-2.0.35/
./configure --prefix=/usr/local/webserver/lib/gd --with-freetype=/usr/local/webserver/lib/freetype --with-jpeg --with-png
make
make install
cd ../
tar zxvf libxml2-sources-2.6.30.tar.gz
cd libxml2-2.6.30/
./configure --prefix=/usr/local/webserver/lib/libxml
make && make install
cd ../
2、編譯安裝MySQL 5.0.45
/usr/sbin/useradd -g mysql mysql
tar zxvf mysql-5.0.45.tar.gz
cd mysql-5.0.45
./configure --prefix=/usr/local/webserver/mysql/ --without-debug --with-unix-socket-path=/tmp/mysql.sock --with-client-ldflags=-all-static --with-mysqld-ldflags=-all-static --enable-assembler --with-extra-charsets=gbk,gb2312,utf8 --with-pthread --enable-thread-safe-client
make && make install
chmod +w /usr/local/webserver/mysql
chown -R mysql:mysql /usr/local/webserver/mysql
cp support-files/my-medium.cnf /usr/local/webserver/mysql/my.cnf
附:以下爲附加步驟,如果你想在這臺服務器上運行MySQL數據庫,則執行以下兩步。如果你只是希望讓PHP支持MySQL擴展庫,能夠連接其他服務器上的MySQL數據庫,那麼,以下兩步無需執行。
①、以mysql用戶帳號的身份建立數據表:
②、啓動MySQL(最後的&表示在後臺運行)
3、編譯安裝PHP(FastCGI模式)
tar zxvf php-5.2.4.tar.gz
cd php-5.2.4/
./configure --prefix=/usr/local/webserver/php --with-mysql=/usr/local/webserver/mysql --with-config-file-path=/usr/local/webserver/php/etc --with-gd=/usr/local/webserver/lib/gd --enable-gd-native-ttf --enable-gd-jis-conv --with-iconv-dir=/usr/local/webserver/lib/libiconv --with-freetype-dir=/usr/local/webserver/lib/freetype --with-jpeg-dir=/usr/local --with-png-dir=/usr/local --with-zlib --with-libxml-dir=/usr/local/webserver/lib/libxml --enable-xml --disable-debug --disable-rpath --enable-discard-path --enable-safe-mode --enable-bcmath --enable-shmop --enable-sysvsem --enable-inline-optimization --with-curl --with-curlwrappers --enable-mbregex --enable-fastcgi --enable-force-cgi-redirect
make && make install
cp php.ini-dist /usr/local/webserver/php/etc/php.ini
cd ../
附:編譯PHP之後,爲PHP添加擴展的方法。(本步驟可選)
/usr/local/webserver/php/bin/phpize
./configure --with-php-config=/usr/local/webserver/php/bin/php-config
make && make install
cd ../../../
修改extension_dir = "/usr/local/webserver/php/lib/php/extensions/no-debug-non-zts-20060613/"
4、創建www用戶和組,以及其使用的目錄:
/usr/sbin/useradd -u 48 -g www www
mkdir -p /data0/vshare/htdocs
chmod +w /data0/vshare/htdocs
chown -R www:www /data0/vshare/htdocs
5、安裝lighttpd中附帶的spawn-fcgi,用來啓動php-cgi
注:壓縮包中的spawn-fcgi程序爲已經編譯成二進制的版本。
chmod +x /usr/local/webserver/php/bin/spawn-fcgi
6、啓動php-cgi進程,監聽127.0.0.1的10080端口,進程數爲250(如果服務器內存小於3GB,可以只開啓25個進程),用戶爲www:
三、安裝Nginx 0.5.31
1、安裝Nginx所需的pcre庫:
cd pcre-7.2/
./configure
make && make install
cd ../
2、安裝Nginx
cd nginx-0.5.31/
./configure --user=www --group=www --prefix=/usr/local/webserver/nginx
make && make install
cd ../
3、創建Nginx日誌目錄
chmod +w /data1/logs
chown -R www:www /data1/logs
4、創建Nginx配置文件
①、在/usr/local/webserver/nginx/conf/目錄中創建nginx.conf文件:
vi /usr/local/webserver/nginx/conf/nginx.conf
輸入以下內容:
worker_processes 10;
#error_log logs/error.log;
#error_log logs/error.log notice;
#error_log logs/error.log info;
#pid logs/nginx.pid;
#Specifies the value for maximum file descriptors that can be opened by this process.
worker_rlimit_nofile 51200;
events
{
use epoll;
#maxclient = worker_processes * worker_connections / cpu_number
worker_connections 51200;
}
http
{
include conf/mime.types;
default_type application/octet-stream;
log_format main '$remote_addr - $remote_user [$time_local] $request '
'"$status" $body_bytes_sent "$http_referer" '
'"$http_user_agent" "$http_x_forwarded_for"';
access_log /data1/logs/access.log main;
#sendfile on;
#tcp_nopush on;
keepalive_timeout 60;
#gzip on;
server
{
listen 80;
server_name localhost;
index index.html index.htm index.php;
root /data0/vshare/htdocs;
if (-f $request_filename/index.html)
{
rewrite (.*) $1/index.html break;
}
if (-f $request_filename/index.htm)
{
rewrite (.*) $1/index.htm break;
}
if (-f $request_filename/index.php)
{
rewrite (.*) $1/index.php break;
}
location ~ .*\.php?$
{
include conf/fcgi.conf;
fastcgi_pass 127.0.0.1:10080;
fastcgi_index index.php;
}
}
}
②、在/usr/local/webserver/nginx/conf/目錄中創建fcgi.conf文件:
輸入以下內容:
fastcgi_param SERVER_SOFTWARE nginx;
fastcgi_param QUERY_STRING $query_string;
fastcgi_param REQUEST_METHOD $request_method;
fastcgi_param CONTENT_TYPE $content_type;
fastcgi_param CONTENT_LENGTH $content_length;
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
fastcgi_param SCRIPT_NAME $fastcgi_script_name;
fastcgi_param REQUEST_URI $request_uri;
fastcgi_param DOCUMENT_URI $document_uri;
fastcgi_param DOCUMENT_ROOT $document_root;
fastcgi_param SERVER_PROTOCOL $server_protocol;
fastcgi_param REMOTE_ADDR $remote_addr;
fastcgi_param REMOTE_PORT $remote_port;
fastcgi_param SERVER_ADDR $server_addr;
fastcgi_param SERVER_PORT $server_port;
fastcgi_param SERVER_NAME $server_name;
# PHP only, required if PHP was built with --enable-force-cgi-redirect
#fastcgi_param REDIRECT_STATUS 200;
5、啓動Nginx
/usr/local/webserver/nginx/sbin/nginx -c /usr/local/webserver/nginx/conf/nginx.conf
四、配置開機自動啓動Nginx + PHP
在末尾增加以下內容:
ulimit -SHn 51200
/usr/local/webserver/nginx/sbin/nginx -c /usr/local/webserver/nginx/conf/nginx.conf
五、優化Linux內核參數
在末尾增加以下內容:
net.ipv4.tcp_keepalive_time = 300
net.ipv4.tcp_syncookies = 1
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_tw_recycle = 1
net.ipv4.ip_local_port_range = 5000 65000
使配置立即生效:
(全文完)