在Exchange2010和Domino之間利用共享地址空間路由信息實驗

一、環境準備 1 環境服務器和客戶端

1 AD/DNS服務器 192.168.220.254 windows2008 R2

2 dsgrd-mail01服務器192.168.220.253 windows2008R2 + exchange2010Mailbox+Hub Transport

3 dsgrd-maill服務器192.168.220.250 windows2008R2 + exchange2010Mailbox+Hub Transport

4 dsgrd-mail02服務器192.168.220.248 windows2008R2+domino8.5.1

5 dsgrd-mail03 服務器 192.168.220.247 windows2008R2+domino8.5.1

6 windowsxp 客戶端 192.168.2.190 windowXP+Outlook2010 exchange Profile + outlook 2010 POP3 Profile For Domino server

2 拓撲圖

二、Exchange（dsgrd-mail：192.168.220.250）服務器配置： 1 創建dsgrd.com郵件域，類型爲內部中繼；

2 創建internal.dsgrd.com郵件域，用來接收和處理從domino轉發過來的郵件，域類型爲權威域；

3創建到達domino服務器（DSGRD-MAIL02）的發送連接器

4 收件人配置-郵箱配置-個人郵箱賬號（yuanrengui），添加internal.dsgrd.com域的郵件地址，即[email protected]；[email protected]爲默認郵件地址；

注意：如果是大量郵件賬號，可以通過郵件策略設置，自動添加Internal.dsgrd.com域後綴的郵件地址

三、Domino（dsgrd-mail02:192.168.220.248）服務器配置： 1創建並啓動dsgrd-mail02的smtp偵聽：

2配置允許SMTP中繼主機（192.168.220.250/192.168.2.0(用戶stmp agent網絡段)）

3 配置DNS服務器（DCA.DSGRD.COM：192.168.220.254）

配置internal.dsgrd.com的mx記錄，用於domino通過SMTP交付郵件；

4 配置外部SMTP域（需要在mail01和mail03上完成配置）

5 配置SMTP連接文檔（dsgrd-mail02）

6註冊用戶yuanrg，並在domin郵件服務器上創建郵件文件

7 註冊用戶yuanrengui，並在第三方郵件服務器（dsgrd-mail）上創建郵件文件,在個人文檔中創建轉發地址，轉發地址的域爲internal.dsgrd.com;

四、實驗驗證 1實驗環境準備

準備一套windowsXP加入域dsgrd.com；使用outlook，創建一個exchange用戶和一個domino用戶profile；

1.1 爲用戶yuanrengui準備exchange profile

1.2 爲用戶yuanrg準備Pop3 profile,郵件接收和發送服務器指向domino服務器（dsgrd-mail02）

2 實驗方法設計 2.1 [email protected]向[email protected]和[email protected]郵箱發送郵件，驗證是否能成功；

期望結果：

l 通過exchange用戶profile能接收到目的地址爲[email protected]的測試郵件；

l 通過pop3 用戶profile能接收到目的地址爲[email protected]的測試郵件；

[email protected]向[email protected]和[email protected]郵箱發送郵件，驗證是否成功；

期望結果：

l 通過pop3 用戶profile能接收到目的地址爲[email protected]的測試郵件；

l 通過檢查byd.com 用戶profile能檢查到接收到的郵件；

2.3 從[email protected]向[email protected]和[email protected]郵箱發送郵件，驗證是否成功；

期望結果：

l 通過exchange用戶profile能接收到目的地址爲[email protected]的測試郵件；

l 通過檢查byd.com 用戶profile能檢查到接收到的郵件；

五、參考文檔

1&2 來自domino administrator 8.5.1 Help

http://technet.microsoft.com/en-us/library/bb676395.aspx

1 樣例：同一因特網域中的第三方服務器與 Domino 之間的郵件路由

本樣例中，Acme 在爲一些用戶處理郵件的本地因特網域中有三臺 IBM(R) Lotus(R) Domino 服務器和一臺第三方 SMTP 主機。所有用戶在 Domino 目錄中都有項目。當用戶向 acme.com 域中的另一個用戶發送郵件時，Domino 服務器會在 Domino 目錄中查找收件人。如果收件人在三臺 Domino 郵件服務器之一（Mail1、Mail2 或 Mail3）上有郵件文件，則服務器通過 IBM(R) Lotus(R) Notes(R) 路由將郵件路由到目標服務器。Notes 路由可以處理 MIME 和 Notes 格式的郵件。如果收件人在第三方服務器 (non-Notesserver.acme.com) 上有郵件文件，則他們的“個人”文檔中會有域“non-Notesserver.acme.com”的轉發地址。爲了通過 SMTP 路由文件，Mail1 和 Mail3 會在“外部 SMTP 域”文檔中查找“*.non-Notesserver.acme.com”，它對應於將 Mail2 列爲傳輸郵件目標服務器的“SMTP 連接”文檔。服務器通過 Notes 路由將郵件發送到 Mail2，Mail2 應用的“配置設置”文檔的“路由器/SMTP”“基本”選項卡上已啓用“在將消息發送到外部本地因特網域”。如果郵件是 Notes 格式的，Mail2 會將其轉換爲 MIME。Mail2 通過 TCP/IP 連接到 non-Notesserver.acme.com 並通過 SMTP 傳輸郵件。

如果 non-Notesserver.acme.com 上的用戶將郵件發送給 Mail1、Mail2 或 Mail3 上的用戶，服務器將通過 SMTP 把郵件傳輸到 Mail2（其“服務器”文檔中的“基本”選項卡中啓用了“SMTP 偵聽任務”），然後 Mail2 通過 Notes 路由將郵件路由到目標服務器。

配置這些服務器需要執行下列步驟：

· 爲 Mail2 啓用 SMTP 偵聽任務

· 正確設置 DNS

· 爲“*.non-Notesserver.acme.com”創建“外部 SMTP 域”文檔鏈接到 Mail2 的“SMTP 連接”文檔

相關主題

郵件路由配置樣例

使服務器能夠接收通過 SMTP 路由發送的郵件

DNS（域名系統）和 SMTP 郵件路由

通過 Notes 路由將外出因特網郵件傳輸到 SMTP 服務器

創建“SMTP 連接”文檔

2 Example of mail routing between a third-party server and Domino in the same Internet domain

In this example, Acme has three IBM? Lotus? Domino? servers and a third-party SMTP host in the local Internet domain that handles mail for some users. All users have entries in the Domino Directory. When a user sends mail to another user in the acme.com domain, the Domino server looks up the recipient in the Domino Directory. If the recipient has a mail file on one of the Domino mail servers -- Mail1, Mail2, or Mail3 -- the server routes the message to its destination over IBM? Lotus? Notes? routing. Notes routing handles both MIME and Notes format messages. If the recipient has a mail file on the third-party server, non-Notesserver.acme.com, their Person document has a forwarding address with the domain "non-Notesserver.acme.com." To route mail over SMTP, Mail1 and Mail3 find a Foreign SMTP Domain document for "*.non-Notesserver.acme.com" that corresponds to an SMTP Connection document listing Mail2 as the server to which to transfer messages. The server sends the message via Notes routing to Mail2, which has the field "SMTP used when sending messages outside of the local Internet domain" enabled on the Router/SMTP-Basics tab of the Configuration Settings document that applies to it. If the message is in Notes format, Mail2 converts it to MIME. Mail2 connects to non-Notesserver.acme.com over TCP/IP and transfers the message over SMTP.

If a user on non-Notesserver.acme.com sends a message to a user on Mail1, Mail2, or Mail3, the server transfers the message over SMTP to Mail2, which has the SMTP listener task enabled on the Basics tab of its Server document, and Mail2 routes the message to its destination over Notes routing.

Configuring these servers requires:

· Enabling the SMTP listener task for Mail2

· Setting up DNS correctly

· Creating a Foreign SMTP Domain document for "*.non-Notesserver.acme.com" and an SMTP Connection document that links to Mail2

Related topics

Sample mail routing configurations

Enabling a server to receive mail sent over SMTP routing

The Domain Name System (DNS) and SMTP mail routing

Transferring outbound Internet mail to an SMTP server over Notes routing

Creating an SMTP Connection document

3 Configure Exchange 2010 to Route Messages for a Shared Address Space

2 out of 3 rated this helpful - Rate this topic

Applies to: Exchange Server 2010 SP2

Topic Last Modified: 2011-03-19

An organization may have to share the same SMTP address space between two or more different e-mail systems. For example, you may have to share the SMTP address space between Exchange and a third-party e-mail system, or between Exchange environments that are configured in different Active Directory forests. In these scenarios, users in each e-mail system have the same domain suffix as part of their e-mail addresses.

You can use the EMC or the Shell to configure a Microsoft Exchange Server 2010 Hub Transport server to route messages for a shared address space.

Looking for other management tasks related to managing message routing? Check out Managing Message Routing.

Step 1: Create an internal relay domain

You need to be assigned permissions before you can perform this procedure. To see what permissions you need, see the "Accepted domains" entry in the Transport Permissions topic.

To support routing messages for a shared address space, you must create an accepted domain that's configured as an internal relay domain. When you configure an accepted domain as an internal relay domain, Exchange first tries to deliver to a recipient in the Exchange organization. If the recipient isn't found, the message is routed to the Send connector that has the closest address space match.

Use the EMC to create an internal relay domain

1. In the console tree, expand Organization Configuration, select Hub Transport, and then in the work pane, click the Accepted Domains tab.
2. In the action pane, click New Accepted Domain. The New Accepted Domain wizard appears.
3. On the New Accepted Domain page, complete the following fields:
   • Name Use this field to identify the accepted domain in the user interface. You can type any name that you want. We recommend that you select a meaningful name that helps you easily identify the purpose of this accepted domain. For example, you may want to use a name that identifies this as a subsidiary domain or as a hosted domain. You must use a unique name for each accepted domain.
   • Accepted Domain Use this field to identify the SMTP namespace for which the Exchange organization will accept e-mail messages. You can use a wildcard character to accept messages for a domain and all its subdomains. For example, you can type *.contoso.com to set Contoso.com and all its subdomains as accepted domains.
4. After you complete these fields on the New Accepted Domain page, select the following option: Internal Relay Domain.
5. Click New.
6. On the Completion page, click Finish.

Use the Shell to create an internal relay domain

This example creates the internal relay domain Contoso for the SMTP domain contoso.com.

Copy

New-AcceptedDomain -Name "Contoso" -DomainName contoso.com -DomainType InternalRelay

For detailed syntax and parameter information, see New-AcceptedDomain.

Step 2: Create a Send connector to route e-mail to the shared domain

You need to be assigned permissions before you can perform this procedure. To see what permissions you need, see the "Send connectors" entry in the Transport Permissions topic.

You must also add a Send connector that's sourced on a Hub Transport server and configured to send e-mail to the shared address space.

Caution:

To achieve the correct routing behavior, you must specify a Hub Transport server as the source server for the Send connector. If the Edge Transport server is specified as the source server for the Send connector, a routing loop will occur.

Use the EMC to create a Send connector to route e-mail to the shared domain

1. In the console tree, expand Organization Configuration, select Hub Transport, and then in the work pane, click the Send Connectors tab.
2. In the action pane, click New Send Connector. The New Send Connector wizard starts.
3. On the Introduction page, follow these steps:
   • In the Name field, type a meaningful name for this connector. This name is used to identify the connector.
   • In the Select the intended use for this connector field, select one of the following usage types for the connector. The usage type determines the default permission sets that are assigned on the connector and grants those permissions to trusted security principals:
     ? Internal Select this usage type if the e-mail system with which Exchange 2010 shares an address space is another Exchange 2010 organization.
     ? Internet Select this usage type if the e-mail system with which Exchange 2010 shares an address space is a third-party e-mail system.
4. Click Next.
5. On the Address space page, click Add. In the SMTP Address Space dialog box, enter the domain name to which this connector will send mail, for example, contoso.com or *.contoso.com. You may select the Include all subdomains check box to use this connector to send e-mail to all subdomains of the address space. If necessary, you can also provide a specific cost for this connector. When you're finished, click OK. Leave the Scoped send connector check box cleared, and then click Next.
6. On the Network settings page, select Route mail through the following smart hosts. Click Add.
7. In the Add Smart Host dialog box, select IP Address or Fully qualified domain name (FQDN) to specify how to locate the smart host. If you select IP Address, enter the IP address of the smart host. If you select Fully qualified domain name (FQDN), enter the FQDN of the smart host. The sending server must be able to resolve the FQDN. When you're finished, click OK. To add more smart hosts, click Add, and repeat this step. If you want to use a specific list of external DNS servers instead of the DNS servers specified in the adapter settings, select the Use the External DNS Lookup settings on the transport server check box. When you're finished, click Next.
8. On the Configure smart host authentication settings page, select the method that's used to authenticate to the smart host. The following smart host authentication methods are available:
   • None
   • Basic Authentication
   • Basic Authentication over TLS
   • Exchange Server Authentication
   • Externally Secured (for example, with IPsec)
9. Click Next.
10. On the Source Server page, click Add to add a source server. By default, the Hub Transport server that you're currently working on is listed as a source server. In the Select Hub Transport or Subscribed Edge Transport dialog box, select the Hub Transport servers that will be used as the source server for sending messages to the shared address space. When you finish adding source servers, click OK. Click Next.
11. On the New Connector page, review the configuration summary for the connector. If you want to modify the settings, click Back. To create the Send connector by using the settings in the configuration summary, click New.
12. On the Completion page, click Finish.

Use the Shell to create a Send connector to route e-mail to the shared domain

This example creates a Send connector with the following settings:

• Configures the connector as an Internet usage type
• Assigns the address space contoso.com
• Routes messages to the smart host smarthost.contoso.com
• Uses the Externally Secured authentication mechanism
• Sets the maximum message size to 20 megabytes (MB)

Copy

New-SendConnector -Name "Contoso.com Send Connector" -Internet -AddressSpace contoso.com -DNSRoutingEnabled $false -SmartHosts smarthost.contoso.com -SmartHostAuthMechanism ExternalAuthoritative -MaxMessageSize 20MB

For detailed syntax and parameter information, see New-SendConnector.

http://technet.microsoft.com/en-us/library/bb676395.aspx