centos+bond+bridge+docker(ssh容器)固定ip實現測試環境（二）

創建bond接口請查看：

http://568273240.blog.51cto.com/2921150/1689541

創建bridge接口直接上配置文件，應該nmtui沒成功。

# cat /etc/sysconfig/network-scripts/ifcfg-Bond_connection_1 

DEVICE=bond0

TYPE=Bond

BONDING_MASTER=yes

BOOTPROTO=none

DEFROUTE=yes

IPV4_FAILURE_FATAL=no

IPV6INIT=no

NAME="Bond connection 1"

UUID=3787f827-24bd-4a2c-bd24-b9b085bcf002

ONBOOT=yes

BONDING_OPTS="updelay=0 resend_igmp=1 use_carrier=1 miimon=100 downdelay=0 xmit_hash_policy=0 primary_reselect=0 fail_over_mac=0 arp_validate=0 mode=802.3ad lacp_rate=0 arp_interval=0 ad_select=0"

#IPADDR=192.168.1.84

#PREFIX=24

#GATEWAY=192.168.1.1

BRIDGE="bridge0"

# cat /etc/sysconfig/network-scripts/ifcfg-bridge0 

TYPE="Bridge"

BOOTPROTO="static"

IPADDR=192.168.1.84

PREFIX=24

GATEWAY=192.168.1.1

NAME="bridge0"

DEVICE="bridge0"

ONBOOT="yes"

# systemctl restart network

建議將BOOTPROTO改成none或static，不容易出問題。

    博主QQ:568273240

    博客：http://568273240.blog.51cto.com/