華爲設備實現VLAN和單臂路由

一、VLAN
1、創建VLAN
[Huawei]vlan 10 //創建並進入VLAN10
[Huawei]vlan batch 10 20 //創建VLAN10和20
[Huawei]vlan batch 10 to 20 //創建VLAN10至20
2、查看VLAN
display vlan
3、配置接口類型(access、trunk和hybrid，默認爲Hybrid)
[Huawei-Ethernet0/0/1]port link-type access
4、將Access接口加入VLAN(兩種方法)
1)VLAN視圖下
[Huawei-vlan2]port Ethernet 0/0/1
2)接口視圖下
[Huawei-Ethernet0/0/1]port default vlan 2
5、將Trunk類型接口加入VLAN
[Huawei-Ethernet0/0/1]port trunk allow-pass vlan 2

二、單臂路由
1、創建vlan10和vlan20
[Huawei]vlan batch 10 20
2、設置接口類型爲access並加入VLAN
[Huawei]interface Ethernet 0/0/1
[Huawei-Ethernet0/0/1]port link-type access
[Huawei-Ethernet0/0/1]port default vlan 10
3、配置中繼口trunk並向允許通過的VLAN中
[Huawei-Ethernet0/0/22]port link-type trunk
[Huawei-Ethernet0/0/22]port trunk allow-pass vlan 10 20
4、配置單臂路由
[Huawei]interface GigabitEthernet 0/0/0
[Huawei-GigabitEthernet0/0/0]undo shutdown
[Huawei]interface GigabitEthernet 0/0/0.10
[Huawei-GigabitEthernet0/0/0.10]dot1q termination vid 10
//配置VLAN類型和封裝協議
[Huawei-GigabitEthernet0/0/0.10]arp broadcast enable
//使子接口支持ARP廣播