verilog常用系統函數以及例子

1.打開文件

integer file_id;

file_id = fopen(“file_path/file_name”);

2.寫入文件： $fmonitor,$fwrite,$fdisplay,$fstrobe

//$fmonitor只要有變化就一直記錄

$fmonitor(file_id, “%format_char”, parameter);

$fmonitor(file_id, “%m: %t in1=%d o1=%h”, $time, in1, o1);

//$fwrite需要觸發條件才記錄

$fwrite(file_id, “%format_char”, parameter);

//$fdisplay需要觸發條件才記錄

$fdisplay(file_id, “%format_char”, parameter);

$fstrobe();

3.讀取文件：$fread

integer file_id;

file_id = $fread(“file_path/file_name”, “r”);

4.關閉文件：$fclose

$fclose(fjile_id);

5.由文件設定存儲器初值：$readmemh，$readmemb

$readmemh(“file_name”, memory_name"); //初始化數據爲十六進制

$readmemb(“file_name”, memory_name"); //初始化數據爲二進制

6、文件顯示：$monitor,$write，$display

$display,$write用於輸出信息

$display(“rvel = %h hex %d decimal”,rvel,rvel);

$monitor($time, ,“rxd = %b txd = %b”,rxd ,txd)

6、文件定位

$fseek，文件定位，可以從任意點對文件進行操作；

$fscanf，對文件一行進行讀寫。

7、退出仿真器$finish

8、隨機數據產生：$random

//下面是一些常見的應用：
//1、讀寫文件
`timescale 1 ns/1 ns
module FileIO_tb;
integer fp_r, fp_w, cnt;
reg [7:0] reg1, reg2, reg3;
initial begin
  fp_r = $fopen("data_in.txt", "r");
  fp_w = $fopen("data_out.txt", "w");
 
  while(!$feof(fp_r)) begin
    cnt = $fscanf(fp_r, "%d %d %d", reg1, reg2, reg3);
    $display("%d %d %d", reg1, reg2, reg3);
    $fwrite(fp_w, "%d %d %d\n", reg3, reg2, reg1);
  end
 
  $fclose(fp_r);
  $fclose(fp_w);
end
endmodule
//============================================== 2、
integer file, char;
reg eof;
initial begin
   file = $fopenr("myfile.txt");
   eof = 0;
   while (eof == 0) begin
       char = $fgetc(file);
       eof = $feof (file);
       $display ("%s", char); 
   end
end
//3、文件處理定位
`define SEEK_SET 0
`define SEEK_CUR 1
`define SEEK_END 2
integer file, offset, position, r;
r = $fseek(file, 0, `SEEK_SET);
r = $fseek(file, 0, `SEEK_CUR);
r = $fseek(file, 0, `SEEK_END);
r = $fseek(file, position, `SEEK_SET);
//4、
integer r, file, start, count;
reg [15:0] mem[0:10], r16;
r = $fread(file, mem[0], start, count);
r = $fread(file, r16);
//5、
integer file, position;
position = $ftell(file);
//6、
integer file, r, a, b;
reg [80*8:1] string;
file = $fopenw("output.log");
r = $sformat(string, "Formatted %d %x", a, b);
r = $sprintf(string, "Formatted %d %x", a, b);
r = $fprintf(file, "Formatted %d %x", a, b);
// 7、
integer file, r;
file = $fopenw("output.log");
r = $fflush(file);
//8、
// This is a pattern file - read_pattern.pat
// time bin dec hex
10: 001 1 1
20.0: 010 20 020
50.02: 111 5 FFF
62.345: 100 4 DEADBEEF
75.789: XXX 2 ZzZzZzZz
`timescale 1ns / 10 ps
`define EOF 32'hFFFF_FFFF
`define NULL 0
`define MAX_LINE_LENGTH 1000

module read_pattern;
integer file, c, r;
reg [3:0] bin;
reg [31:0] dec, hex;
real real_time;
reg [8*`MAX_LINE_LENGTH:0] line;

initial
    begin : file_block
    $timeformat(-9, 3, "ns", 6);
    $display("time bin decimal hex");
    file = $fopenr("read_pattern.pat");
    if (file == `NULL) // If error opening file
        disable file_block; // Just quit

    c = $fgetc(file);
    while (c != `EOF)
        begin
       
        if (c == "/")
            r = $fgets(line, `MAX_LINE_LENGTH, file);
        else
            begin
            // Push the character back to the file then read the next time
            r = $ungetc(c, file);
            r = $fscanf(file," %f:\n", real_time);

            // Wait until the absolute time in the file, then read stimulus
            if ($realtime > real_time)
                $display("Error - absolute time in file is out of order - %t",
                        real_time);
                else
                    #(real_time - $realtime)
                        r = $fscanf(file," %b %d %h\n",bin,dec,hex);
                end // if c else
            c = $fgetc(file);
        end // while not EOF

    r = $fcloser(file);
    end // initial

// Display changes to the signals
always @(bin or dec or hex)
    $display("%t %b %d %h", $realtime, bin, dec, hex);

endmodule // read_pattern
// 9、自動比較輸出結果
`define EOF 32'hFFFF_FFFF
`define NULL 0
`define MAX_LINE_LENGTH 1000
module compare;
integer file, r;
reg a, b, expect, clock;
wire out;
reg [`MAX_LINE_LENGTH*8:1];
parameter cycle = 20;

initial
    begin : file_block
    $display("Time Stim Expect Output");
    clock = 0;

    file = $fopenr("compare.pat");
    if (file == `NULL)
        disable file_block;

    r = $fgets(line, MAX_LINE_LENGTH, file); // Skip comments
    r = $fgets(line, MAX_LINE_LENGTH, file);

    while (!$feof(file))
        begin
        // Wait until rising clock, read stimulus
        @(posedge clock)
        r = $fscanf(file, " %b %b %b\n", a, b, expect);

        // Wait just before the end of cycle to do compare
        #(cycle - 1)
        $display("%d %b %b %b %b", $stime, a, b, expect, out);
        $strobe_compare(expect, out);
        end // while not EOF

    r = $fcloser(file);
    $stop;
    end // initial

always #(cycle / 2) clock = !clock; // Clock generator

and #4 (out, a, b); // Circuit under test
endmodule // compare

//10、從文件中讀數據到mem（這個好像一般人用的最多了）

`define EOF 32'HFFFF_FFFF
`define MEM_SIZE 200_000

module load_mem;
  integer file, i;
  reg [7:0] mem[0:`MEM_SIZE];
  reg [80*8:1] file_name;
initial    
  begin    
  file_name = "data.bin";    
  file = $fopenr(file_name);    
  i = $fread(file, mem[0]);    
  $display("Loaded %0d entries \n", i);    
  i = $fcloser(file);    
  $stop;    
  end 
endmodule // load_mem