Connection Type: PPPoE client
Connection Authentication: None
Connection MTU: 1492 bytes
Address: Dynamically assigned by the ISP
Outbound Interface: E0/0
You will know that the connection has been successfully enabled when you can ping the simulated Internet address of 172.16.1.1
Note: Routing to the ISP: Manually configured default route
CPE# show ip route
….
Gateway of last resort is not set
192.168.1.0/27 is subnetted, 7 subnets
C 192.168.1.0 is directly connected, Ethernet0/1
D 192.168.1.32 [90/307200] via 192.168.1.2, 00:02:16,Ethernet0/1
D 192.168.1.64 [90/307200] via 192.168.1.2, 00:02:17,Ethernet0/1
D 192.168.1.96 [90/307200] via 192.168.1.2, 00:02:17,Ethernet0/1
D 192.168.1.128 [90/307200] via 192.168.1.3, 00:02:17,Ethernet0/1
D 192.168.1.192 [90/307200] via 192.168.1.3, 00:02:17,Ethernet0/1
D 192.168.1.224 [90/307200] via 192.168.1.3, 00:02:17,Ethernet0/1
CPE# show run
….
no service password-encryption
!
hostname CPE
!
boot-start-marker
boot-end-marker
!
no aaa new-model
resource policy
clock timezone PST 0
ip subnet-zero
no ip dhcp use vrf connected
!
interface Ethernet0/0
description link to cable modem
no ip address
shutdown
!
interface Ethernet0/1
description link to corporate nework
ip address 192.168.1.1 255.255.255.224
!
interface Ethernet0/2
no ip address
!
interface Ethernet0/3
no ip address
shutdown
!
router eigrp 1
network 192.168.1.0
auto-summary
!
line con 0
line vty 0 15
end