CentOS6.2編譯安裝Heartbeat

 

1、安裝cluster glue

安裝heartbeat之前需要安裝glue。

1. yum install autoconf automake libtool glib2-devel libxml2-devel bzip2-devel e2fsprogs-devel libxslt-devel libtool-ltdl-devel make wget（紅色標記處也需要安裝）
2. groupadd haclient
3. useradd -g haclient hacluster
4. cd /tmp
5. wget http://hg.linux-ha.org/glue/archive/glue-1.0.9.tar.bz2
6. tar xjf glue-1.0.9.tar.bz2
7. cd Reusable-Cluster-Components-glue--glue-1.0.9
8. ./autogen.sh
9. ./configure --prefix=/usr/local/heartbeat LIBS=’/lib/libuuid.so.1‘（64位系統上是LIBS=’/lib64/libuuid.so.1‘）
10. make && make install

安裝過程中會在INTERNET中校驗一些xml文件，會耗費大量時間，要耐心等待。如果報錯可能是網絡引起，多試幾次就行(yum install docbook-dtds docbook-style-xsl安裝這兩個包之後解決 )。

安裝Resource Agents

1. cd /tmp
2. wget --no-check-certificate https://github.com/ClusterLabs/resource-agents/tarball/v3.9.2
3. tar xzf v3.9.2
4. cd ClusterLabs-resource-agents-b735277/
5. ./autogen.sh
6. ./configure --prefix=/usr/local/heartbeat CFLAGS=-I/usr/local/heartbeat/include LDFLAGS=-L/usr/local/heartbeat/lib LIBS=’/lib/libuuid.so.1‘（64位系統上是LIBS=’/lib64/libuuid.so.1‘）
7. ln -s /usr/local/heartbeat/lib/* /lib/ (64位系統是ln -s /usr/local/heartbeat/lib/* /lib64/ 解決libplumb.so.2等包找不到的問題，./configure的時候會產生一些需要的包)
8. make && make install

安裝Heartbeat

1. cd /tmp
2. wget http://hg.linux-ha.org/heartbeat-STABLE_3_0/archive/7e3a82377fa8.tar.bz2
3. tar xjf 7e3a82377fa8.tar.bz2
4. cd Heartbeat-3-0-7e3a82377fa8/
5. ./bootstrap
6. ./configure --prefix=/usr/local/heartbeat CFLAGS=-I/usr/local/heartbeat/include LDFLAGS=-L/usr/local/heartbeat/lib LIBS='/lib64/libuuid.so.1'
7. vim /usr/local/heartbeat/include/heartbeat/glue_config.h
8. 刪除最後一行：#define HA_HBCONF_DIR “/usr/local/heartbeat/etc/ha.d/”（解決glue_config.h:99:1: error: "HA_HBCONF_DIR" redefined錯誤）
9. make && make install
10. cp doc/ha.cf /usr/local/heartbeat/etc/ha.d/
11. cp doc/haresources /usr/local/heartbeat/etc/ha.d/
12. cp doc/authkeys /usr/local/heartbeat/etc/ha.d/
13. cp heartbeat/init.d/heartbeat /etc/rc.d/init.d/
14. chkconfig --add heartbeat
15. chkconfig heartbeat on
16. chmod 600 /usr/local/heartbeat/etc/ha.d/authkeys
17. sed -i 's#/usr/lib/ocf#/usr/local/heartbeat/usr/lib/ocf#g' /usr/local/heartbeat/etc/ha.d/shellfuncs
18. sed -i 's#/usr/lib/ocf#/usr/local/heartbeat/usr/lib/ocf#g' /usr/local/heartbeat/usr/lib/ocf/lib//heartbeat/ocf-shellfuncs
19. sed -i 's#/usr/lib/ocf#/usr/local/heartbeat/usr/lib/ocf#g' /usr/local/heartbeat/etc/ha.d/resource.d//hto-mapfuncs

（上面17、18、19三條是用新的路徑替換默認路徑，將/usr/lib/ocf替換爲/usr/local/heartbeat/usr/lib/ocf）