如何修改CentOS 7.6的網卡名稱

1. 背景介紹

在centos5的時候，我們習慣了eth0這樣的網絡設備命名，在centos6發現網絡設備變成了em1這樣的命名，到了CentOS 7版本對網卡的命名規則又進行了重新定義，因此，對於這個命名規則的修改，還是讓很多人比較頭疼，無法適應這種隨機生成的網卡名稱，下面就教大家如何將網卡固定修改爲eth0，操作步驟也很簡單；

2. 修改方法

1. 進入到/etc/sysconfig/network-scripts/目錄下，備份網卡文件

   [root@192168088102-NFS-Server ~]# cd /etc/sysconfig/network-scripts/
   [root@192168088102-NFS-Server network-scripts]# ls
   ifcfg-ens33  ifdown-bnep  ifdown-ipv6  ifdown-ppp     ifdown-Team      ifup          ifup-eth   ifup-isdn   ifup-post    ifup-sit       ifup-tunnel       network-functions
   ifcfg-lo     ifdown-eth   ifdown-isdn  ifdown-routes  ifdown-TeamPort  ifup-aliases  ifup-ippp  ifup-plip   ifup-ppp     ifup-Team      ifup-wireless     network-functions-ipv6
   ifdown       ifdown-ippp  ifdown-post  ifdown-sit     ifdown-tunnel    ifup-bnep     ifup-ipv6  ifup-plusb  ifup-routes  ifup-TeamPort  init.ipv6-global
   [root@192168088102-NFS-Server network-scripts]# cp ifcfg-ens33 ifcfg-ens33.bak
   [root@192168088102-NFS-Server network-scripts]# ll ifcfg-ens33*
   -rw-r--r--. 1 root root 347 Jul 27 11:41 ifcfg-ens33
   -rw-r--r--. 1 root root 347 Jul 27 12:48 ifcfg-ens33.bak

2. 將網卡文件名稱改爲ifcfg-eth0，並修改網卡配置文件

   [root@192168088102-NFS-Server network-scripts]# mv ifcfg-ens33 ifcfg-eth0
   [root@192168088102-NFS-Server network-scripts]# ll ifcfg-eth0
   -rw-r--r--. 1 root root 347 Jul 27 11:41 ifcfg-eth0
   [root@192168088102-NFS-Server network-scripts]# cat ifcfg-eth0
   TYPE=Ethernet
   PROXY_METHOD=none
   BROWSER_ONLY=no
   BOOTPROTO=static
   DEFROUTE=yes
   IPV4_FAILURE_FATAL=no
   #將ens33改爲eth0
   NAME=eth0
   UUID=7615d0b6-d6c2-46bf-9140-45083e4aed4b
   #將ens33改爲eth0
   DEVICE=eth0
   ONBOOT=yes
   IPADDR=192.168.88.102
   NETMASK=255.255.255.0
   GATEWAY=192.168.88.2

3. 修改grub文件，添加內核參數net.ifnames=0 biosdevname=0信息，使網卡名稱修改爲eth0

   [root@192168088102-NFS-Server network-scripts]# cat /etc/sysconfig/grub
   GRUB_TIMEOUT=5
   GRUB_DISTRIBUTOR="$(sed 's, release .*$,,g' /etc/system-release)"
   GRUB_DEFAULT=saved
   GRUB_DISABLE_SUBMENU=true
   GRUB_TERMINAL_OUTPUT="console"
   GRUB_CMDLINE_LINUX="crashkernel=auto rhgb net.ifnames=0 biosdevname=0 quiet"
   GRUB_DISABLE_RECOVERY="true"

4. 生成啓動菜單，重新加載到啓動中，並重啓系統

   [root@192168088102-NFS-Server network-scripts]# grub2-mkconfig -o /boot/grub2/grub.cfg
   Generating grub configuration file ...
   Found linux image: /boot/vmlinuz-3.10.0-957.el7.x86_64
   Found initrd image: /boot/initramfs-3.10.0-957.el7.x86_64.img
   Found linux image: /boot/vmlinuz-0-rescue-dc723d2d2d444cf0ae3794ab211366b8
   Found initrd image: /boot/initramfs-0-rescue-dc723d2d2d444cf0ae3794ab211366b8.img
   done
   [root@192168088102-NFS-Server network-scripts]# reboot

5. 驗證網卡是否成功修改爲eth0

   [root@192168088102-NFS-Server ~]# ip addr
   1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
   link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
   inet 127.0.0.1/8 scope host lo
      valid_lft forever preferred_lft forever
   inet6 ::1/128 scope host
      valid_lft forever preferred_lft forever
   2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
   link/ether 00:0c:29:b6:52:ed brd ff:ff:ff:ff:ff:ff
   inet 192.168.88.102/24 brd 192.168.88.255 scope global noprefixroute eth0
      valid_lft forever preferred_lft forever
   inet6 fe80::20c:29ff:feb6:52ed/64 scope link
      valid_lft forever preferred_lft forever