方法一：禁用該可預測命名規則
1、對於這一點，你可以在啓動時傳遞“net.ifnames=0 biosdevname=0 ”的內核參數。這是通過編輯/etc/default/grub並加入“net.ifnames=0 biosdevname=0 ”到GRUBCMDLINELINUX變量來實現的。
cat /etc/sysconfig/grub GRUB_TIMEOUT=5 GRUB_DISTRIBUTOR="$(sed 's, release .*$,,g' /etc/system-release)" GRUB_DEFAULT=saved GRUB_DISABLE_SUBMENU=true GRUB_TERMINAL_OUTPUT="console" GRUB_CMDLINE_LINUX="ipv6.disable=1 crashkernel=auto rhgb quiet net.ifnames=0 biosdevname=0" GRUB_DISABLE_RECOVERY="true"
2、運行命令grub2-mkconfig -o /boot/grub2/grub.cfg 來重新生成GRUB配置並更新內核參數。
3、reboot
方法二：修改rules文件
1、文件沒有的話可以手動創建，後綴是.rules，按照順序將MAC地址與網卡名稱綁定
cat /etc/udev/rules.d/70-persistent-ipoib.rules
# This is a sample udev rules file that demonstrates how to get udev to
# set the name of IPoIB interfaces to whatever you wish. There is a
# 16 character limit on network device names though, so don't go too nuts
#
# Important items to note: ATTR{type}=="32" is IPoIB interfaces, and the
# ATTR{address} match must start with ?* and only reference the last 8
# bytes of the address or else the address might not match on any given
# start of the IPoIB stack
#
# Note: as of rhel7, udev is case sensitive on the address field match
# and all addresses need to be in lower case.
#
# ACTION=="add", SUBSYSTEM=="net", DRIVERS=="?*", ATTR{type}=="32", ATTR{address}=="?*00:02:c9:03:00:31:78:f2", NAME="mlx4_ib3"
ACTION=="add", SUBSYSTEM=="net", DRIVERS=="?*", ATTR{type}=="32", ATTR{address}=="?*00:0c:29:7a:1e:16", NAME="eth0"2、修改網卡配置文件，配置DEVICE和NAME，並加入HWADDR
注：DEVICE、NAME和HWADDR 要和.rules 裏面相對應
cat /etc/sysconfig/network-scripts/ifcfg-eth0 TYPE=Ethernet BOOTPROTO=static DEFROUTE=yes NAME=eth0 #UUID=408326bb-7565-4aa5-b156-c89a0ba839d2 HWADDR=00:0c:29:7a:1e:16 DEVICE=eth0 ONBOOT=yes IPADDR=172.16.18.188 NETMASK=255.255.255.0 GATEWAY=172.16.18.1 DNS=219.141.136.10
3、reboot