中文亂碼問題，記錄一下
一、
1.Alt+Ctrl+F1 進入第一個終端tty1，發現中文亂碼。
2.安裝zhcon。
sudo apt-get install zhcon
3 輸入下面命令，啓動zhcon，中文顯示正常。
sudo zhcon --utf8 --drv=vga
==============================================沒啥效果
二、
參考https://blog.csdn.net/lihe4151021/article/details/90048918
Ctrl+Alt+F1進入tty1界面
下載zhcon安裝包
sudo apt-get install zhcon
需要將用戶添加到添加到video組中
sudo adduser $(whoami) video
註銷當前用戶，重新登錄添加到video組的用戶。然後，運行
zhcon --utf8
================================================
三、
參考https://blog.csdn.net/flywindmouse/article/details/13527769
fbterm--支持中文顯示的控制檯
-----------------------------------------------------------------------
fbterm 提供了一個快速的終端仿真器，它直接運行在你的系統中的幀緩衝 (framebuffer) 之上。使用幀緩衝可以在終端渲染 UTF-8 文本時可以提高性能。fbterm 旨在提供國際化和現代字體支持時至少與 Linux 內核終端一樣快。它允許你在同一個幀緩衝上創建多達 10 個不同的終端窗口，每個窗口都有它的回滾歷史。
要運行 fbterm，首先檢查當前用戶是否在 video 組，如不在，則加入。當運行 fbterm 後，會在用戶主目錄下生成 .fbtermrc 配置文件，其中可以更換字體樣式及大小、默認前/背景色。
若你不能看到中文，按 Ctrl+Alt+E 退出後，再運行下面的命令：
LANG=zh_CN.utf-8 fbterm
-----------------------------------------------------------------------
1.下面我就安裝了fbterm：
sudo apt-get install fbterm
2.安裝完後，運行fbterm:
sudo fbterm
3.退出fbterm
在控制檯中按 Ctrl+Alt + E 退出
4.當然fbterm功能是很強大的，支持字體樣式、大小、樣色設置等，修改配置文件.fbtermrc即可，在控制檯輸入以下命令：
sudo gedit ~/.fbtermrc
打開配置文件內容大致如下，可以根據需要做相應修改保存（然後重新啓動fbterm：在控制檯輸入Ctrl+Alt+E 退出）則可：
---------------------------------
# Configuration for FbTerm
# Lines starting with '#' are ignored.
# Note that end-of-line comments are NOT supported, comments must be on a line of their own.
# font family names/pixelsize used by fbterm, multiple font family names must be seperated by ','
# and using a fixed width font as the first is strongly recommended
#font-names=Nokia Font YanTi
font-names=Monaco
font-size=15
# force font width (and/or height), usually for non-fixed width fonts
# legal value format: n (fw_new = n), +n (fw_new = fw_old + n), -n (fw_new = fw_old - n)
#font-width=
#font-height=
# default color of foreground/background text
# available colors: 0 = black, 1 = red, 2 = green, 3 = brown, 4 = blue, 5 = magenta, 6 = cyan, 7 = white
color-foreground=7
color-background=0
# max scroll-back history lines of every window, value must be [0 - 65535], 0 means disable it
history-lines=1000
# up to 5 additional text encodings, multiple encodings must be seperated by ','
# run 'iconv --list' to get available encodings.
text-encodings=
# cursor shape: 0 = underline, 1 = block
# cursor flash interval in milliseconds, 0 means disable flashing
cursor-shape=0
cursor-interval=500
# additional ascii chars considered as part of a word while auto-selecting text, except ' ', 0-9, a-z, A-Z
word-chars=._-
# change the clockwise orientation angle of screen display
# available values: 0 = 0 degree, 1 = 90 degrees, 2 = 180 degrees, 3 = 270 degrees
screen-rotate=0
# specify the favorite input method program to run
input-method=yong
# treat ambiguous width characters as wide
#ambiguous-wide=yes
