轉載請標明出處:http://blog.csdn.net/lmj623565791/article/details/38339817 , 本文出自:【張鴻洋的博客】
最近由於工作的變動,導致的博客的更新計劃有點被打亂,希望可以儘快脈動回來~
今天給大家帶來一篇自定義ViewGroup的教程,說白了,就是教大家如何自定義ViewGroup,如果你對自定義ViewGroup還不是很瞭解,或者正想學習如何自定義,那麼你可以好好看看這篇博客。
1、概述
在寫代碼之前,我必須得問幾個問題:
1、ViewGroup的職責是啥?
ViewGroup相當於一個放置View的容器,並且我們在寫佈局xml的時候,會告訴容器(凡是以layout爲開頭的屬性,都是爲用於告訴容器的),我們的寬度(layout_width)、高度(layout_height)、對齊方式(layout_gravity)等;當然還有margin等;於是乎,ViewGroup的職能爲:給childView計算出建議的寬和高和測量模式 ;決定childView的位置;爲什麼只是建議的寬和高,而不是直接確定呢,別忘了childView寬和高可以設置爲wrap_content,這樣只有childView才能計算出自己的寬和高。
2、View的職責是啥?
View的職責,根據測量模式和ViewGroup給出的建議的寬和高,計算出自己的寬和高;同時還有個更重要的職責是:在ViewGroup爲其指定的區域內繪製自己的形態。
3、ViewGroup和LayoutParams之間的關係?
大家可以回憶一下,當在LinearLayout中寫childView的時候,可以寫layout_gravity,layout_weight屬性;在RelativeLayout中的childView有layout_centerInParent屬性,卻沒有layout_gravity,layout_weight,這是爲什麼呢?這是因爲每個ViewGroup需要指定一個LayoutParams,用於確定支持childView支持哪些屬性,比如LinearLayout指定LinearLayout.LayoutParams等。如果大家去看LinearLayout的源碼,會發現其內部定義了LinearLayout.LayoutParams,在此類中,你可以發現weight和gravity的身影。
2、View的3種測量模式
上面提到了ViewGroup會爲childView指定測量模式,下面簡單介紹下三種測量模式:
EXACTLY:表示設置了精確的值,一般當childView設置其寬、高爲精確值、match_parent時,ViewGroup會將其設置爲EXACTLY;
AT_MOST:表示子佈局被限制在一個最大值內,一般當childView設置其寬、高爲wrap_content時,ViewGroup會將其設置爲AT_MOST;
UNSPECIFIED:表示子佈局想要多大就多大,一般出現在AadapterView的item的heightMode中、ScrollView的childView的heightMode中;此種模式比較少見。
注:上面的每一行都有一個一般,意思上述不是絕對的,對於childView的mode的設置還會和ViewGroup的測量mode有一定的關係;當然了,這是第一篇自定義ViewGroup,而且絕大部分情況都是上面的規則,所以爲了通俗易懂,暫不深入討論其他內容。
3、從API角度進行淺析
上面敘述了ViewGroup和View的職責,下面從API角度進行淺析。
View的根據ViewGroup傳人的測量值和模式,對自己寬高進行確定(onMeasure中完成),然後在onDraw中完成對自己的繪製。
ViewGroup需要給View傳入view的測量值和模式(onMeasure中完成),而且對於此ViewGroup的父佈局,自己也需要在onMeasure中完成對自己寬和高的確定。此外,需要在onLayout中完成對其childView的位置的指定。
4、完整的例子
需求:我們定義一個ViewGroup,內部可以傳入0到4個childView,分別依次顯示在左上角,右上角,左下角,右下角。
1、決定該ViewGroup的LayoutParams
對於我們這個例子,我們只需要ViewGroup能夠支持margin即可,那麼我們直接使用系統的MarginLayoutParams
-
@Override
-
public ViewGroup.LayoutParams generateLayoutParams(AttributeSet attrs)
-
{
-
return new MarginLayoutParams(getContext(), attrs);
-
}
重寫父類的該方法,返回MarginLayoutParams的實例,這樣就爲我們的ViewGroup指定了其LayoutParams爲MarginLayoutParams。
2、onMeasure
在onMeasure中計算childView的測量值以及模式,以及設置自己的寬和高:
-
-
-
-
@Override
-
protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec)
-
{
-
-
-
-
int widthMode = MeasureSpec.getMode(widthMeasureSpec);
-
int heightMode = MeasureSpec.getMode(heightMeasureSpec);
-
int sizeWidth = MeasureSpec.getSize(widthMeasureSpec);
-
int sizeHeight = MeasureSpec.getSize(heightMeasureSpec);
-
-
-
-
measureChildren(widthMeasureSpec, heightMeasureSpec);
-
-
-
-
int width = 0;
-
int height = 0;
-
-
int cCount = getChildCount();
-
-
int cWidth = 0;
-
int cHeight = 0;
-
MarginLayoutParams cParams = null;
-
-
-
int lHeight = 0;
-
-
int rHeight = 0;
-
-
-
int tWidth = 0;
-
-
int bWidth = 0;
-
-
-
-
-
for (int i = 0; i < cCount; i++)
-
{
-
View childView = getChildAt(i);
-
cWidth = childView.getMeasuredWidth();
-
cHeight = childView.getMeasuredHeight();
-
cParams = (MarginLayoutParams) childView.getLayoutParams();
-
-
-
if (i == 0 || i == 1)
-
{
-
tWidth += cWidth + cParams.leftMargin + cParams.rightMargin;
-
}
-
-
if (i == 2 || i == 3)
-
{
-
bWidth += cWidth + cParams.leftMargin + cParams.rightMargin;
-
}
-
-
if (i == 0 || i == 2)
-
{
-
lHeight += cHeight + cParams.topMargin + cParams.bottomMargin;
-
}
-
-
if (i == 1 || i == 3)
-
{
-
rHeight += cHeight + cParams.topMargin + cParams.bottomMargin;
-
}
-
-
}
-
-
width = Math.max(tWidth, bWidth);
-
height = Math.max(lHeight, rHeight);
-
-
-
-
-
-
setMeasuredDimension((widthMode == MeasureSpec.EXACTLY) ? sizeWidth
-
: width, (heightMode == MeasureSpec.EXACTLY) ? sizeHeight
-
: height);
-
}
10-14行,獲取該ViewGroup父容器爲其設置的計算模式和尺寸,大多情況下,只要不是wrap_content,父容器都能正確的計算其尺寸。所以我們自己需要計算如果設置爲wrap_content時的寬和高,如何計算呢?那就是通過其childView的寬和高來進行計算。
17行,通過ViewGroup的measureChildren方法爲其所有的孩子設置寬和高,此行執行完成後,childView的寬和高都已經正確的計算過了
43-71行,根據childView的寬和高,以及margin,計算ViewGroup在wrap_content時的寬和高。
80-82行,如果寬高屬性值爲wrap_content,則設置爲43-71行中計算的值,否則爲其父容器傳入的寬和高。
3、onLayout對其所有childView進行定位(設置childView的繪製區域)
-
-
@Override
-
protected void onLayout(boolean changed, int l, int t, int r, int b)
-
{
-
int cCount = getChildCount();
-
int cWidth = 0;
-
int cHeight = 0;
-
MarginLayoutParams cParams = null;
-
-
-
-
for (int i = 0; i < cCount; i++)
-
{
-
View childView = getChildAt(i);
-
cWidth = childView.getMeasuredWidth();
-
cHeight = childView.getMeasuredHeight();
-
cParams = (MarginLayoutParams) childView.getLayoutParams();
-
-
int cl = 0, ct = 0, cr = 0, cb = 0;
-
-
switch (i)
-
{
-
case 0:
-
cl = cParams.leftMargin;
-
ct = cParams.topMargin;
-
break;
-
case 1:
-
cl = getWidth() - cWidth - cParams.leftMargin
-
- cParams.rightMargin;
-
ct = cParams.topMargin;
-
-
break;
-
case 2:
-
cl = cParams.leftMargin;
-
ct = getHeight() - cHeight - cParams.bottomMargin;
-
break;
-
case 3:
-
cl = getWidth() - cWidth - cParams.leftMargin
-
- cParams.rightMargin;
-
ct = getHeight() - cHeight - cParams.bottomMargin;
-
break;
-
-
}
-
cr = cl + cWidth;
-
cb = cHeight + ct;
-
childView.layout(cl, ct, cr, cb);
-
}
-
-
}
代碼比較容易懂:遍歷所有的childView,根據childView的寬和高以及margin,然後分別將0,1,2,3位置的childView依次設置到左上、右上、左下、右下的位置。
如果是第一個View(index=0) :則childView.layout(cl, ct, cr, cb); cl爲childView的leftMargin , ct 爲topMargin , cr 爲cl+ cWidth , cb爲 ct + cHeight
如果是第二個View(index=1) :則childView.layout(cl, ct, cr, cb);
cl爲getWidth() - cWidth - cParams.leftMargin- cParams.rightMargin;
ct 爲topMargin , cr 爲cl+ cWidth , cb爲 ct + cHeight
剩下兩個類似~
這樣就完成了,我們的ViewGroup代碼的編寫,下面我們進行測試,分別設置寬高爲固定值,wrap_content,match_parent
5、測試結果
佈局1:
-
<com.example.zhy_custom_viewgroup.CustomImgContainer xmlns:android="http://schemas.android.com/apk/res/android"
-
xmlns:tools="http://schemas.android.com/tools"
-
android:layout_width="200dp"
-
android:layout_height="200dp"
-
android:background="#AA333333" >
-
-
<TextView
-
android:layout_width="50dp"
-
android:layout_height="50dp"
-
android:background="#FF4444"
-
android:gravity="center"
-
android:text="0"
-
android:textColor="#FFFFFF"
-
android:textSize="22sp"
-
android:textStyle="bold" />
-
-
<TextView
-
android:layout_width="50dp"
-
android:layout_height="50dp"
-
android:background="#00ff00"
-
android:gravity="center"
-
android:text="1"
-
android:textColor="#FFFFFF"
-
android:textSize="22sp"
-
android:textStyle="bold" />
-
-
<TextView
-
android:layout_width="50dp"
-
android:layout_height="50dp"
-
android:background="#ff0000"
-
android:gravity="center"
-
android:text="2"
-
android:textColor="#FFFFFF"
-
android:textSize="22sp"
-
android:textStyle="bold" />
-
-
<TextView
-
android:layout_width="50dp"
-
android:layout_height="50dp"
-
android:background="#0000ff"
-
android:gravity="center"
-
android:text="3"
-
android:textColor="#FFFFFF"
-
android:textSize="22sp"
-
android:textStyle="bold" />
-
-
</com.example.zhy_custom_viewgroup.CustomImgContainer>
ViewGroup寬和高設置爲固定值
效果圖:
佈局2:
-
<com.example.zhy_custom_viewgroup.CustomImgContainer xmlns:android="http://schemas.android.com/apk/res/android"
-
xmlns:tools="http://schemas.android.com/tools"
-
android:layout_width="wrap_content"
-
android:layout_height="wrap_content"
-
android:background="#AA333333" >
-
-
<TextView
-
android:layout_width="150dp"
-
android:layout_height="150dp"
-
android:background="#E5ED05"
-
android:gravity="center"
-
android:text="0"
-
android:textColor="#FFFFFF"
-
android:textSize="22sp"
-
android:textStyle="bold" />
-
-
<TextView
-
android:layout_width="50dp"
-
android:layout_height="50dp"
-
android:background="#00ff00"
-
android:gravity="center"
-
android:text="1"
-
android:textColor="#FFFFFF"
-
android:textSize="22sp"
-
android:textStyle="bold" />
-
-
<TextView
-
android:layout_width="50dp"
-
android:layout_height="50dp"
-
android:background="#ff0000"
-
android:gravity="center"
-
android:text="2"
-
android:textColor="#FFFFFF"
-
android:textSize="22sp"
-
android:textStyle="bold" />
-
-
<TextView
-
android:layout_width="50dp"
-
android:layout_height="50dp"
-
android:background="#0000ff"
-
android:gravity="center"
-
android:text="3"
-
android:textColor="#FFFFFF"
-
android:textSize="22sp"
-
android:textStyle="bold" />
-
-
</com.example.zhy_custom_viewgroup.CustomImgContainer>
ViewGroup的寬和高設置爲wrap_content
效果圖:
佈局3:
-
<com.example.zhy_custom_viewgroup.CustomImgContainer xmlns:android="http://schemas.android.com/apk/res/android"
-
xmlns:tools="http://schemas.android.com/tools"
-
android:layout_width="match_parent"
-
android:layout_height="match_parent"
-
android:background="#AA333333" >
-
-
<TextView
-
android:layout_width="150dp"
-
android:layout_height="150dp"
-
android:background="#E5ED05"
-
android:gravity="center"
-
android:text="0"
-
android:textColor="#FFFFFF"
-
android:textSize="22sp"
-
android:textStyle="bold" />
-
-
<TextView
-
android:layout_width="50dp"
-
android:layout_height="50dp"
-
android:background="#00ff00"
-
android:gravity="center"
-
android:text="1"
-
android:textColor="#FFFFFF"
-
android:textSize="22sp"
-
android:textStyle="bold" />
-
-
<TextView
-
android:layout_width="50dp"
-
android:layout_height="50dp"
-
android:background="#ff0000"
-
android:gravity="center"
-
android:text="2"
-
android:textColor="#FFFFFF"
-
android:textSize="22sp"
-
android:textStyle="bold" />
-
-
<TextView
-
android:layout_width="150dp"
-
android:layout_height="150dp"
-
android:background="#0000ff"
-
android:gravity="center"
-
android:text="3"
-
android:textColor="#FFFFFF"
-
android:textSize="22sp"
-
android:textStyle="bold" />
-
-
</com.example.zhy_custom_viewgroup.CustomImgContainer>
ViewGroup的寬和高設置爲match_parent
可以看到無論ViewGroup的寬和高的值如何定義,我們的需求都實現了預期的效果~~
好了,通過這篇教程,希望大家已經能夠初步掌握自定義ViewGroup的步驟,大家可以嘗試自定義ViewGroup去實現LinearLayout的效果~~
最後說明下,此爲第一篇ViewGroup的教程,以後還會進一步的探討如何更好的自定義ViewGroup~~~