一、數據庫
/*==============================================================*/
/* DBMS name: Microsoft SQL Server 2000 */
/*==============================================================*/
if exists (select 1
from sysobjects
where id = object_id('newsContent')
and type = 'U')
drop table newsContent
go
/*==============================================================*/
/* Table: newsContent */
/*==============================================================*/
create table newsContent (
ID int identity(1,1) primary key,
Title nvarchar(50) not null,
Content ntext not null,
AddDate datetime not null,
CategoryID int not null
)
go
二、項目文件架構
實現步驟爲:4-3-6-5-2-1
ID |
項目 |
描述 |
用途 |
項目引用關係 |
實例所需文件 |
相關方法 |
1 |
Web |
表現層 |
Web頁和控件 |
引用BLL |
WebUI.aspx WebUI.aspx.cs |
GetContent() |
2 |
BLL |
業務邏輯層 |
業務邏輯組件 |
引用 IDAL,Model,使用DALFactory創建實例 |
Content.cs |
ContentInfo GetContentInfo(int id) |
3 |
IDAL |
數據訪問層接口定義 |
每個DAL實現都要實現的一組接口 |
引用 Model |
IContent.cs |
ContentInfo GetContentInfo(int id) |
4 |
Model |
業務實體 |
傳遞各種數據的容器 |
無引用 |
ContentInfo.cs |
|
5 |
DALFactory |
數據層的抽象工廠 |
創建反射,用來確定加載哪一個數據庫訪問程序集的類 |
引用IDAL,通過讀取web.config裏設置的程序集,加載類的實例,返回給BLL使用。 |
Content.cs |
IDAL.Icontent create() |
6 |
SQLServerDAL |
SQLServer數據訪問層 |
Microsoft SQL Server特定的Pet Shop DAL實現,使用了IDAL接口 |
引用 Model和IDAL,被DALFactory加載的程序集,實現接口裏的方法。 |
SqlHelper.cs
Content.cs |
SqlDataReader ExecuteReader() PrepareCommand() ContentInfo GetContentInfo(int id) |
OracleDAL |
Oracle數據訪問層 |
|||||
7 |
DBUtility |
數據庫訪問組件基礎類 |
GetSqlServerConnectionString得到數據庫連接字符串,也可省去該項目,在SQLServerDAL.SqlHelper中用static readonly string SqlConnectionString代替。 |
無引用 |
|
|
實現步驟過程
1、創建Model,實現業務實體。
2、創建IDAL,實現接口。
3、創建SQLServerDAL,實現接口裏的方法。
4、增加web.config裏的配置信息,爲SQLServerDAL的程序集。
5、創建DALFactory,返回程序集的指定類的實例。
6、創建BLL,調用DALFactory,得到程序集指定類的實例,完成數據操作方法。
7、創建WEB,調用BLL裏的數據操作方法。
注意:
1、web.config裏的程序集名稱必須與SQLServerDAL裏的輸出程序集名稱一致。
2、DALFactory裏只需要一個DataAccess類,可以完成創建所有的程序集實例。
3、項目創建後,注意修改各項目的默認命名空間和程序集名稱。
4、注意修改解決方案裏的項目依賴。
5、注意在解決方案裏增加各項目引用。
三、各層間的訪問過程
1、傳入值,將值進行類型轉換(爲整型)。
2、創建BLL層的content.cs對象c,通過對象c訪問BLL層的方法GetContentInfo(ID)調用BLL層。
3、BLL層方法GetContentInfo(ID)中取得數據訪問層SQLServerDAL的實例,實例化IDAL層的接口對象dal,這個對象是由工廠層DALFactory創建的,然後返回IDAL層傳入值所查找的內容的方法dal.GetContentInfo(id)。
4、數據工廠通過web.config配置文件中給定的webdal字串訪問SQLServerDAL層,返回一個完整的調用SQLServerDAL層的路徑給 BLL層。
5、到此要調用SQLServerDAL層,SQLServerDAL層完成賦值Model層的對象值爲空,給定一個參數,調用SQLServerDAL層的SqlHelper的ExecuteReader方法,讀出每個字段的數據賦值給以定義爲空的Model層的對象。
6、SqlHelper執行sql命令,返回一個指定連接的數據庫記錄集,在這裏需要引用參數類型,提供爲打開連接命令執行做好準備PrepareCommand。
7、返回Model層把查詢得到的一行記錄值賦值給SQLServerDAL層的引入的Model層的對象ci,然後把這個對象返回給BLL。
8、回到Web層的BLL層的方法調用,把得到的對象值賦值給Lable標籤,在前臺顯示給界面
四、項目中的文件清單
1、DBUtility項目
(1)connectionInfo.cs
using System;
using System.Configuration;
namespace Utility
{
/// <summary>
/// ConnectionInfo 的摘要說明。
/// </summary>
public class ConnectionInfo
{
public static string GetSqlServerConnectionString()
{
return ConfigurationSettings.AppSettings["SQLConnString"];
}
}
}
2、SQLServerDAL項目
(1)SqlHelper.cs抽象類
using System;
using System.Data;
using System.Data.SqlClient;
using DBUtility;
namespace SQLServerDAL
{
/// <summary>
/// SqlHelper 的摘要說明。
/// </summary>
public abstract class SqlHelper
{
public static readonly string CONN_STR = ConnectionInfo.GetSqlServerConnectionString();
/// <summary>
/// 用提供的函數,執行SQL命令,返回一個從指定連接的數據庫記錄集
/// </summary>
/// <remarks>
/// 例如:
/// SqlDataReader r = ExecuteReader(connString, CommandType.StoredProcedure, "PublishOrders", new SqlParameter("@prodid", 24));
/// </remarks>
/// <param name="connectionString">SqlConnection有效的SQL連接字符串</param>
/// <param name="commandType">CommandType:CommandType.Text、CommandType.StoredProcedure</param>
/// <param name="commandText">SQL語句或存儲過程</param>
/// <param name="commandParameters">SqlParameter[]參數數組</param>
/// <returns>SqlDataReader:執行結果的記錄集</returns>
public static SqlDataReader ExecuteReader(string connString, CommandType cmdType, string cmdText, params SqlParameter[] cmdParms)
{
SqlCommand cmd = new SqlCommand();
SqlConnection conn = new SqlConnection(connString);
// 我們在這裏用 try/catch 是因爲如果這個方法拋出異常,我們目的是關閉數據庫連接,再拋出異常,
// 因爲這時不會有DataReader存在,此後commandBehaviour.CloseConnection將不會工作。
try
{
PrepareCommand(cmd, conn, null, cmdType, cmdText, cmdParms);
SqlDataReader rdr = cmd.ExecuteReader(CommandBehavior.CloseConnection);
cmd.Parameters.Clear();
return rdr;
}
catch
{
conn.Close();
throw;
}
}
/// <summary>
/// 爲執行命令做好準備:打開數據庫連接,命令語句,設置命令類型(SQL語句或存儲過程),函數語取。
/// </summary>
/// <param name="cmd">SqlCommand 組件</param>
/// <param name="conn">SqlConnection 組件</param>
/// <param name="trans">SqlTransaction 組件,可以爲null</param>
/// <param name="cmdType">語句類型:CommandType.Text、CommandType.StoredProcedure</param>
/// <param name="cmdText">SQL語句,可以爲存儲過程</param>
/// <param name="cmdParms">SQL參數數組</param>
private static void PrepareCommand(SqlCommand cmd, SqlConnection conn, SqlTransaction trans, CommandType cmdType, string cmdText, SqlParameter[] cmdParms)
{
if (conn.State != ConnectionState.Open)
conn.Open();
cmd.Connection = conn;
cmd.CommandText = cmdText;
if (trans != null)
cmd.Transaction = trans;
cmd.CommandType = cmdType;
if (cmdParms != null)
{
foreach (SqlParameter parm in cmdParms)
cmd.Parameters.Add(parm);
}
}
}
}
(2)Content.cs類
using System;
using System.Data;
using System.Data.SqlClient;
using Model;
using IDAL;
namespace SQLServerDAL
{
/// <summary>
/// Content 的摘要說明。
/// </summary>
public class Content:IContent
{
private const string PARM_ID = "@ID";
private const string SQL_SELECT_CONTENT = "Select ID, Title, Content, AddDate, CategoryID From newsContent Where ID = @ID";
public ContentInfo GetContentInfo(int id)
{
//創意文章內容類
ContentInfo ci = null;
//創建一個參數
SqlParameter parm = new SqlParameter(PARM_ID, SqlDbType.BigInt, 8);
//賦上ID值
parm.Value = id;
using(SqlDataReader sdr = SqlHelper.ExecuteReader(SqlHelper.CONN_STR, CommandType.Text, SQL_SELECT_CONTENT, parm))
{
if(sdr.Read())
{
ci = new ContentInfo(sdr.GetInt32(0),sdr.GetString(1), sdr.GetString(2),
sdr.GetDateTime(3), sdr.GetInt32(4), sdr.GetInt32(5), sdr.GetString(6));
}
}
return ci;
}
}
}
3、Model項目
(1)contentInfo.cs
using System;
namespace Model
{
/// <summary>
/// Class1 的摘要說明。
/// </summary>
public class ContentInfo
{
private int _ID;
private string _Content;
private string _Title;
private string _From;
private DateTime _AddDate;
private int _clsID;
private int _tmpID;
/// <summary>
/// 文章內容構造函數
/// </summary>
/// <param name="id">文章流水號ID</param>
/// <param name="content">文章內容</param>
/// <param name="title">文章標題</param>
/// <param name="from">文章來源</param>
/// <param name="clsid">文章的分類屬性ID</param>
/// <param name="tmpid">文章的模板屬性ID</param>
public ContentInfo(int id,string title,string content,string from,DateTime addDate,int clsid,int tmpid )
{
this._ID = id;
this._Content = content;
this._Title = title;
this._From = from;
this._AddDate = addDate;
this._clsID = clsid;
this._tmpID = tmpid;
}
//屬性
public int ID
{
get { return _ID; }
}
public string Content
{
get { return _Content; }
}
public string Title
{
get { return _Title; }
}
public string From
{
get { return _From; }
}
public DateTime AddDate
{
get { return _AddDate; }
}
public int ClsID
{
get { return _clsID; }
}
public int TmpID
{
get { return _tmpID; }
}
}
}
4、IDAL項目
(1)Icontent.cs
using System;
using Model;
namespace IDAL
{
/// <summary>
/// 文章內容操作接口
/// </summary>
public interface IContent
{
/// <summary>
/// 取得文章的內容。
/// </summary>
/// <param name="id">文章的ID</param>
/// <returns></returns>
ContentInfo GetContentInfo(int id);
}
}
5、DALFactory項目
(1)Content.cs
using System;
using System.Reflection;
using System.Configuration;
using IDAL;
namespace DALFactory
{
/// <summary>
/// 工產模式實現文章接口。
/// </summary>
public class Content
{
public static IDAL.IContent Create()
{
// 這裏可以查看 DAL 接口類。
string path = System.Configuration.ConfigurationSettings.AppSettings["WebDAL"].ToString();
string className = path+".Content";
// 用配置文件指定的類組合
return (IDAL.IContent)Assembly.Load(path).CreateInstance(className);
}
}
}
6、BLL項目
(1)Content.cs
using System;
using Model;
using IDAL;
namespace BLL
{
/// <summary>
/// Content 的摘要說明。
/// </summary>
public class Content
{
public ContentInfo GetContentInfo(int id)
{
// 取得從數據訪問層取得一個文章內容實例
IContent dal = DALFactory.Content.Create();
// 用DAL查找文章內容
return dal.GetContentInfo(id);
}
}
}
7、Web項目
1、Web.config:
<appSettings> <add key="SQLConnString" value="Data Source=localhost;Persist Security info=True;Initial Catalog=newsDB;User ID=sa;Password= " />
<add key="WebDAL" value="SQLServerDAL" />
</appSettings>
2、WebUI.aspx
<%@ Page language="c#" Codebehind="WebUI.aspx.cs" AutoEventWireup="false" Inherits="Web.WebUI" %>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" >
<HTML>
<HEAD>
<title>WebUI</title>
<meta name="GENERATOR" Content="Microsoft Visual Studio .NET 7.1">
<meta name="CODE_LANGUAGE" Content="C#">
<meta name="vs_defaultClientScript" content="JavaScript">
<meta name="vs_targetSchema" content="http://schemas.microsoft.com/intellisense/ie5">
</HEAD>
<body MS_POSITIONING="GridLayout">
<form id="Form1" method="post" runat="server">
<FONT">宋體"></FONT>
<table width="600" border="1">
<tr>
<td style="WIDTH: 173px"> </td>
<td>
<asp:Label id="lblTitle" runat="server"></asp:Label></td>
</tr>
<tr>
<td style="WIDTH: 173px; HEIGHT: 22px"> </td>
<td style="HEIGHT: 22px">
<asp:Label id="lblDataTime" runat="server"></asp:Label></td>
</tr>
<tr>
<td style="WIDTH: 173px"> </td>
<td>
<asp:Label id="lblContent" runat="server"></asp:Label></td>
</tr>
<tr>
<td style="WIDTH: 173px"> </td>
<td> </td>
</tr>
<tr>
<td style="WIDTH: 173px; HEIGHT: 23px"> </td>
<td style="HEIGHT: 23px"> </td>
</tr>
<tr>
<td style="WIDTH: 173px"> </td>
<td> </td>
</tr>
<tr>
<td style="WIDTH: 173px"> </td>
<td> </td>
</tr>
<tr>
<td style="WIDTH: 173px"> </td>
<td> </td>
</tr>
<tr>
<td style="WIDTH: 173px"> </td>
<td>
<asp:Label id="lblMsg" runat="server">Label</asp:Label></td>
</tr>
</table>
</form>
</body>
</HTML>
3、WebUI.aspx.cs後臺調用顯示:
using System;
using System.Collections;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Web;
using System.Web.SessionState;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.HtmlControls;
using BLL;
using Model;
namespace myWeb
{
/// <summary>
/// WebForm1 的摘要說明。
/// </summary>
public class WebUI : System.Web.UI.Page
{
protected System.Web.UI.WebControls.Label lblTitle;
protected System.Web.UI.WebControls.Label lblDataTime;
protected System.Web.UI.WebControls.Label lblContent;
protected System.Web.UI.WebControls.Label lblMsg;
private ContentInfo ci ;
private void Page_Load(object sender, System.EventArgs e)
{
if(!Page.IsPostBack)
{
GetContent("1");
}
}
private void GetContent(string id)
{
int ID = WebComponents.CleanString.GetInt(id);
Content c = new Content();
ci = c.GetContentInfo(ID);
if(ci!=null)
{
this.lblTitle.Text = ci.Title;
this.lblDataTime.Text = ci.AddDate.ToString("yyyy-MM-dd");
this.lblContent.Text = ci.Content;
}
else
{
this.lblMsg.Text = "沒有找到這篇文章";
}
}
#region Web 窗體設計器生成的代碼
override protected void OnInit(EventArgs e)
{
//
// CODEGEN: 該調用是 ASP.NET Web 窗體設計器所必需的。
//
InitializeComponent();
base.OnInit(e);
}
/// <summary>
/// 設計器支持所需的方法 - 不要使用代碼編輯器修改
/// 此方法的內容。
/// </summary>
private void InitializeComponent()
{
this.Load += new System.EventHandler(this.Page_Load);
}
#endregion
}
}
4、WebComponents項目
(1)CleanString.cs
using System;
using System.Text;
namespace myWeb.WebComponents
{
/// <summary>
/// CleanString 的摘要說明。
/// </summary>
public class CleanString
{
public static int GetInt(string inputString)
{
try
{
return Convert.ToInt32(inputString);
}
catch
{
return 0;
}
}
public static string InputText(string inputString, int maxLength)
{
StringBuilder retVal = new StringBuilder();
// check incoming parameters for null or blank string
if ((inputString != null) && (inputString != String.Empty))
{
inputString = inputString.Trim();
//chop the string incase the client-side max length
//fields are bypassed to prevent buffer over-runs
if (inputString.Length > maxLength)
inputString = inputString.Substring(0, maxLength);
//convert some harmful symbols incase the regular
//expression validators are changed
for (int i = 0; i < inputString.Length; i++)
{
switch (inputString[i])
{
case '"':
retVal.Append(""");
break;
case '<':
retVal.Append("<");
break;
case '>':
retVal.Append(">");
break;
default:
retVal.Append(inputString[i]);
break;
}
}
// Replace single quotes with white space
retVal.Replace("'", " ");
}
return retVal.ToString();
}
}
}