1.最小化安裝CentOS
2.更新源更改爲搜狐的源：mirrors.sohu.com
3.yum update
4.服務器基本配置
yum install setuptool ntsysv ntp vixie-cron crontabs microcode_ctl wget irqbalance vim-enhanced
5.執行setup命令5.1 關閉iptables和selinux
5.2 僅僅開啓crond irqbalance microcode_ctl network sshd syslog
二、LNMP環境搭建
1.配置編譯需要的環境
yum -y install autoconf bzip2 bzip2-devel curl curl-devel e2fsprogs e2fsprogs-devel freetype freetype-devel gcc gcc-c++ gcc-g77 gd gd-devel glib2 glib2-devel glibc glibc-devel krb5 krb5-devel libevent libevent-devel libidn libidn-devel libjpeg libjpeg-devel
libpng libpng10 libpng10-devel libpng-devel libtool libtool-libs libxml2 libxml2-devel make ncurses ncurses-devel nss_ldap openldap openldap-clients openldap-devel openldap-servers openssl openssl-devel patch pspell-devel zlib zlib-devel
2.下載所需要安裝的軟件
wget
http://blog.s135.com/soft/linux/nginx_php/nginx/nginx-0.8.36.tar.gz
wget http://blog.s135.com/soft/linux/nginx_php/php/php-5.2.13.tar.gz
wget
http://blog.s135.com/soft/linux/nginx_php/phpfpm/php-5.2.13-fpm-0.5.13.diff.gz
wget
http://blog.s135.com/soft/linux/nginx_php/mysql/mysql-5.1.38.tar.gz
wget
http://blog.s135.com/soft/linux/nginx_php/libiconv/libiconv-1.13.tar.gz
wget
http://blog.s135.com/soft/linux/nginx_php/mcrypt/libmcrypt-2.5.8.tar.gz
wget
http://blog.s135.com/soft/linux/nginx_php/mcrypt/mcrypt-2.6.8.tar.gz
wget
http://blog.s135.com/soft/linux/nginx_php/memcache/memcache-2.2.5.tgz
wget
http://blog.s135.com/soft/linux/nginx_php/mhash/mhash-0.9.9.9.tar.gz
wget http://blog.s135.com/soft/linux/nginx_php/pcre/pcre-8.01.tar.gz
wget
http://blog.s135.com/soft/linux/nginx_php/eaccelerator/eaccelerator-0.9.6.tar.bz2
3.安裝PHP 5.2.13（FastCGI模式）
3.1編譯安裝PHP 5.2.13所需的支持庫
tar zxvf libiconv-1.13.tar.gz
cd libiconv-1.13/
./configure –prefix=/usr/local
make
make install
cd ../
tar zxvf libmcrypt-2.5.8.tar.gz
cd libmcrypt-2.5.8/
./configure
make
make install
/sbin/ldconfig
cd libltdl/
./configure –enable-ltdl-install
make
make install
cd ../../
tar zxvf mhash-0.9.9.9.tar.gz
cd mhash-0.9.9.9/
./configure
make
make install
cd ../
ln -s /usr/local/lib/libmcrypt.la /usr/lib/libmcrypt.la
ln -s /usr/local/lib/libmcrypt.so /usr/lib/libmcrypt.so
ln -s /usr/local/lib/libmcrypt.so.4 /usr/lib/libmcrypt.so.4
ln -s /usr/local/lib/libmcrypt.so.4.4.8 /usr/lib/libmcrypt.so.4.4.8
ln -s /usr/local/lib/libmhash.a /usr/lib/libmhash.a
ln -s /usr/local/lib/libmhash.la /usr/lib/libmhash.la
ln -s /usr/local/lib/libmhash.so /usr/lib/libmhash.so
ln -s /usr/local/lib/libmhash.so.2 /usr/lib/libmhash.so.2
ln -s /usr/local/lib/libmhash.so.2.0.1 /usr/lib/libmhash.so.2.0.1
ln -s /usr/local/bin/libmcrypt-config /usr/bin/libmcrypt-config
tar zxvf mcrypt-2.6.8.tar.gz
cd mcrypt-2.6.8/
/sbin/ldconfig
./configure
make
make install
cd ../
3.2編譯安裝MySQL 5.1.38
/usr/sbin/groupadd mysql
/usr/sbin/useradd -g mysql mysql
tar zxvf mysql-5.1.38.tar.gz
cd mysql-5.1.38/
./configure –prefix=/usr/local/webserver/mysql/ –enable-assembler –with-extra-charsets=complex –enable-thread-safe-client –with-big-tables –with-readline –with-ssl –with-embedded-server –enable-local-infile –with-plugins=innobase
make && make install
chmod +w /usr/local/webserver/mysql
chown -R mysql:mysql /usr/local/webserver/mysql
cd ../
如果你想在這臺服務器上運行MySQL數據庫，則執行以下兩步。如果你只是希望讓PHP支持MySQL擴展庫，能夠連接其他服務器上的MySQL數據庫，那麼，以下兩步無需執行。
3.2.1創建MySQL數據庫存放目錄
mkdir -p /data0/mysql/3306/data/
chown -R mysql:mysql /data0/mysql/
3.2.2以mysql用戶帳號的身份建立數據表
/usr/local/webserver/mysql/bin/mysql_install_db –basedir=/usr/local/webserver/mysql –datadir=/data0/mysql/3306/data –user=mysql
3.2.3創建my.cnf配置文件
[client]
default-character-set = utf8
port = 3306
socket = /tmp/mysql.sock
[mysql]
#prompt=”(\u:blog.s135.com:)[\d]> ”
no-auto-rehash
[mysqld]
#default-character-set = utf8
user = mysql
port = 3306
socket = /tmp/mysql.sock
basedir = /usr/local/webserver/mysql
datadir = /data0/mysql/3306/data
open_files_limit = 10240
back_log = 600
max_connections = 3000
max_connect_errors = 6000
table_cache = 614
external-locking = FALSE
max_allowed_packet = 32M
sort_buffer_size = 2M
join_buffer_size = 2M
thread_cache_size = 300
thread_concurrency = 8
query_cache_size = 32M
query_cache_limit = 2M
query_cache_min_res_unit = 2k
default-storage-engine = MyISAM
default_table_type = MyISAM
thread_stack = 192K
transaction_isolation = READ-COMMITTED
tmp_table_size = 246M
max_heap_table_size = 246M
long_query_time = 1
log_long_format
log-bin = /data0/mysql/3306/binlog
binlog_cache_size = 4M
binlog_format = MIXED
max_binlog_cache_size = 8M
max_binlog_size = 512M
expire_logs_days = 7
key_buffer_size = 256M
read_buffer_size = 1M
read_rnd_buffer_size = 16M
bulk_insert_buffer_size = 64M
myisam_sort_buffer_size = 128M
myisam_max_sort_file_size = 10G
myisam_max_extra_sort_file_size = 10G
myisam_repair_threads = 1
myisam_recover
skip-name-resolve
master-connect-retry = 10
slave-skip-errors = 1032,1062,126,1114,1146,1048,1396
server-id = 1
innodb_additional_mem_pool_size = 16M
innodb_buffer_pool_size = 2048M
innodb_data_file_path = ibdata1:1024M:autoextend
innodb_file_io_threads = 4
innodb_thread_concurrency = 8
innodb_flush_log_at_trx_commit = 2
innodb_log_buffer_size = 16M
innodb_log_file_size = 128M
innodb_log_files_in_group = 3
innodb_max_dirty_pages_pct = 90
innodb_lock_wait_timeout = 120
innodb_file_per_table = 0
[mysqldump]
quick
max_allowed_packet = 32M
3.2.4創建管理MySQL數據庫的shell腳本：
vi /data0/mysql/3306/mysql
#!/bin/sh
mysql_port=3306
mysql_username=”admin”
mysql_password=”asdasdasd”
function_start_mysql()
{
printf “Starting MySQL…\n”
/bin/sh /usr/local/webserver/mysql/bin/mysqld_safe –defaults-file=/data0/mysql/${mysql_port}/my.cnf 2>&1 > /dev/null &
}
function_stop_mysql()
{
printf “Stoping MySQL…\n”
/usr/local/webserver/mysql/bin/mysqladmin -u ${mysql_username} -p${mysql_password} -S /tmp/mysql.sock shutdown
}
function_restart_mysql()
{
printf “Restarting MySQL…\n”
function_stop_mysql
sleep 5
function_start_mysql
}
function_kill_mysql()
{
kill -9 $(ps -ef | grep ‘bin/mysqld_safe’ | grep ${mysql_port} | awk ‘{printf $2}’)
kill -9 $(ps -ef | grep ‘libexec/mysqld’ | grep ${mysql_port} | awk ‘{printf $2}’)
}
if [ "$1" = "start" ]; then
function_start_mysql
elif [ "$1" = "stop" ]; then
function_stop_mysql
elif [ "$1" = "restart" ]; then
function_restart_mysql
elif [ "$1" = "kill" ]; then
function_kill_mysql
else
printf “Usage: /data0/mysql/${mysql_port}/mysql {start|stop|restart|kill}\n”
fi
3.2.5 賦予shell腳本可執行權限
chmod +x /data0/mysql/3306/mysql
3.2.6 啓動MySQL
/data0/mysql/3306/mysql start
3.2.7 通過命令行登錄管理MySQL服務器（提示輸入密碼時直接回車）：
/usr/local/webserver/mysql/bin/mysql -u root -p -S /tmp/mysql.sock
3.2.8 輸入以下SQL語句，創建一個具有root權限的用戶（admin）和密碼（asdasdasd）：
GRANT ALL PRIVILEGES ON *.* TO ‘admin’@'localhost’ IDENTIFIED BY ‘asdasdasd’;
GRANT ALL PRIVILEGES ON *.* TO ‘admin’@’127.0.0.1′ IDENTIFIED BY ‘asdasdasd’;
GRANT ALL PRIVILEGES ON *.* TO ‘root’@’192.168.%.%’ IDENTIFIED BY ‘asdasdasd’;
3.2.9 停止MySQL
/data0/mysql/3306/mysql stop
3.3 編譯安裝PHP（FastCGI模式）
tar zxvf php-5.2.13.tar.gz
gzip -cd php-5.2.13-fpm-0.5.13.diff.gz | patch -d php-5.2.13 -p1
cd php-5.2.13/
./configure –prefix=/usr/local/webserver/php –with-config-file-path=/usr/local/webserver/php/etc –with-mysql=/usr/local/webserver/mysql –with-mysqli=/usr/local/webserver/mysql/bin/mysql_config –with-iconv-dir=/usr/local –with-freetype-dir –with-jpeg-dir –with-png-dir
–with-zlib –with-libxml-dir=/usr –enable-xml –disable-rpath –enable-discard-path –enable-safe-mode –enable-bcmath –enable-shmop –enable-sysvsem –enable-inline-optimization –with-curl –with-curlwrappers –enable-mbregex –enable-fastcgi –enable-fpm –enable-force-cgi-redirect
–enable-mbstring –with-mcrypt –with-gd –enable-gd-native-ttf –with-openssl –with-mhash –enable-pcntl –enable-sockets –with-ldap –with-ldap-sasl –with-xmlrpc –enable-zip –enable-soap
make ZEND_EXTRA_LIBS=’-liconv’
make install
cp php.ini-dist /usr/local/webserver/php/etc/php.ini
cd ../
3.4 編譯安裝PHP5擴展模塊
tar zxvf memcache-2.2.5.tgz
cd memcache-2.2.5/
/usr/local/webserver/php/bin/phpize
./configure –with-php-config=/usr/local/webserver/php/bin/php-config
make
make install
cd ../
tar jxvf eaccelerator-0.9.6.tar.bz2
cd eaccelerator-0.9.6/
/usr/local/webserver/php/bin/phpize
./configure –enable-eaccelerator=shared –with-php-config=/usr/local/webserver/php/bin/php-config
make
make install
cd ../
3.5 修改php.ini文件
手工修改：查找/usr/local/webserver/php/etc/php.ini中的extension_dir = “./”
修改爲extension_dir = “/usr/local/webserver/php/lib/php/extensions/no-debug-non-zts-20060613/”
並在此行後增加以下幾行，然後保存：
extension = “memcache.so”
再查找output_buffering = Off
修改爲output_buffering = On
3.6 配置eAccelerator加速PHP
mkdir -p /usr/local/webserver/eaccelerator_cache
vi /usr/local/webserver/php/etc/php.ini
按shift+g鍵跳到配置文件的最末尾，加上以下配置信息：
[eaccelerator]
zend_extension=”/usr/local/webserver/php/lib/php/extensions/no-debug-non-zts-20060613/eaccelerator.so”
eaccelerator.shm_size=”64″
eaccelerator.cache_dir=”/usr/local/webserver/eaccelerator_cache”
eaccelerator.enable=”1″
eaccelerator.optimizer=”1″
eaccelerator.check_mtime=”1″
eaccelerator.debug=”0″
eaccelerator.filter=”"
eaccelerator.shm_max=”0″
eaccelerator.shm_ttl=”3600″
eaccelerator.shm_prune_period=”3600″
eaccelerator.shm_only=”0″
eaccelerator.compress=”1″
eaccelerator.compress_level=”9″
3.7 創建www用戶和組
/usr/sbin/groupadd www
/usr/sbin/useradd -g www www
3.8創建php-fpm配置文件
在/usr/local/webserver/php/etc/目錄中創建php-fpm.conf文件
rm -f /usr/local/webserver/php/etc/php-fpm.conf
vi /usr/local/webserver/php/etc/php-fpm.conf
<?xml version=”1.0″ ?>
<configuration>
All relative paths in this config are relative to php’s install prefix
<section name=”global_options”>
Pid file
<value name=”pid_file”>/usr/local/webserver/php/logs/php-fpm.pid</value>
Error log file
<value name=”error_log”>/usr/local/webserver/php/logs/php-fpm.log</value>
Log level
<value name=”log_level”>notice</value>
When this amount of php processes exited with SIGSEGV or SIGBUS …
<value name=”emergency_restart_threshold”>10</value>
… in a less than this interval of time, a graceful restart will be initiated.
Useful to work around accidental curruptions in accelerator’s shared memory.
<value name=”emergency_restart_interval”>1m</value>
Time limit on waiting child’s reaction on signals from master
<value name=”process_control_timeout”>5s</value>
Set to ‘no’ to debug fpm
<value name=”daemonize”>yes</value>
</section>
<workers>
<section name=”pool”>
Name of pool. Used in logs and stats.
<value name=”name”>default</value>
Address to accept fastcgi requests on.
Valid syntax is ‘ip.ad.re.ss:port’ or just ‘port’ or ‘/path/to/unix/socket’
<value name=”listen_address”>127.0.0.1:9000</value>
<value name=”listen_options”>
Set listen(2) backlog
<value name=”backlog”>-1</value>
Set permissions for unix socket, if one used.
In Linux read/write permissions must be set in order to allow connections from web server.
Many BSD-derrived systems allow connections regardless of permissions.
<value name=”owner”></value>
<value name=”group”></value>
<value name=”mode”>0666</value>
</value>
Additional php.ini defines, specific to this pool of workers.
<value name=”php_defines”>
<value name=”sendmail_path”>/usr/sbin/sendmail -t -i</value>
<value name=”display_errors”>0</value>
</value>
Unix user of processes
<value name=”user”>www</value>
Unix group of processes
<value name=”group”>www</value>
Process manager settings
<value name=”pm”>
Sets style of controling worker process count.
Valid values are ‘static’ and ‘apache-like’
<value name=”style”>static</value>
Sets the limit on the number of simultaneous requests that will be served.
Equivalent to Apache MaxClients directive.
Equivalent to PHP_FCGI_CHILDREN environment in original php.fcgi
Used with any pm_style.
<value name=”max_children”>128</value>
Settings group for ‘apache-like’ pm style
<value name=”apache_like”>
Sets the number of server processes created on startup.
Used only when ‘apache-like’ pm_style is selected
<value name=”StartServers”>20</value>
Sets the desired minimum number of idle server processes.
Used only when ‘apache-like’ pm_style is selected
<value name=”MinSpareServers”>5</value>
Sets the desired maximum number of idle server processes.
Used only when ‘apache-like’ pm_style is selected
<value name=”MaxSpareServers”>35</value>
</value>
</value>
The timeout (in seconds) for serving a single request after which the worker process will be terminated
Should be used when ‘max_execution_time’ ini option does not stop script execution for some reason
’0s’ means ‘off’
<value name=”request_terminate_timeout”>0s</value>
The timeout (in seconds) for serving of single request after which a php backtrace will be dumped to slow.log file
’0s’ means ‘off’
<value name=”request_slowlog_timeout”>0s</value>
The log file for slow requests
<value name=”slowlog”>logs/slow.log</value>
Set open file desc rlimit
<value name=”rlimit_files”>65535</value>
Set max core size rlimit
<value name=”rlimit_core”>0</value>
Chroot to this directory at the start, absolute path
<value name=”chroot”></value>
Chdir to this directory at the start, absolute path
<value name=”chdir”></value>
Redirect workers’ stdout and stderr into main error log.
If not set, they will be redirected to /dev/null, according to FastCGI specs
<value name=”catch_workers_output”>yes</value>
How much requests each process should execute before respawn.
Useful to work around memory leaks in 3rd party libraries.
For endless request processing please specify 0
Equivalent to PHP_FCGI_MAX_REQUESTS
<value name=”max_requests”>1024</value>
Comma separated list of ipv4 addresses of FastCGI clients that allowed to connect.
Equivalent to FCGI_WEB_SERVER_ADDRS environment in original php.fcgi (5.2.2+)
Makes sense only with AF_INET listening socket.
<value name=”allowed_clients”>127.0.0.1</value>
Pass environment variables like LD_LIBRARY_PATH
All $VARIABLEs are taken from current environment
<value name=”environment”>
<value name=”HOSTNAME”>$HOSTNAME</value>
<value name=”PATH”>/usr/local/bin:/usr/bin:/bin</value>
<value name=”TMP”>/tmp</value>
<value name=”TMPDIR”>/tmp</value>
<value name=”TEMP”>/tmp</value>
<value name=”OSTYPE”>$OSTYPE</value>
<value name=”MACHTYPE”>$MACHTYPE</value>
<value name=”MALLOC_CHECK_”>2</value>
</value>
</section>
</workers>
</configuration>
3.9啓動php-cgi進程，監聽127.0.0.1的9000端口，進程數爲128（如果服務器內存小於3GB，可以只開啓64個進程），用戶爲www
ulimit -SHn 65535
/usr/local/webserver/php/sbin/php-fpm start
4.安裝安裝Nginx 0.8.36
4.1 安裝Nginx所需的pcre庫
tar zxvf pcre-8.01.tar.gz
cd pcre-8.01/
./configure
make && make install
cd ../
4.2 安裝Nginx
tar zxvf nginx-0.8.36.tar.gz
cd nginx-0.8.36/
./configure –user=www –group=www –prefix=/usr/local/webserver/nginx –with-http_stub_status_module –with-http_ssl_module
make && make install
cd ../
4.3 創建Nginx日誌目錄
mkdir -p /data0/logs
chmod +w /data0/logs
chown -R www:www /data0/logs
4.4 創建Nginx配置文件
4.4.1 在/usr/local/webserver/nginx/conf/目錄中創建nginx.conf文件
rm -f /usr/local/webserver/nginx/conf/nginx.conf
vi /usr/local/webserver/nginx/conf/nginx.conf
4.4.2 在/usr/local/webserver/nginx/conf/目錄中創建fcgi.conf文件
vi /usr/local/webserver/nginx/conf/fcgi.conf
fastcgi_param GATEWAY_INTERFACE CGI/1.1;
fastcgi_param SERVER_SOFTWARE nginx;
fastcgi_param QUERY_STRING $query_string;
fastcgi_param REQUEST_METHOD $request_method;
fastcgi_param CONTENT_TYPE $content_type;
fastcgi_param CONTENT_LENGTH $content_length;
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
fastcgi_param SCRIPT_NAME $fastcgi_script_name;
fastcgi_param REQUEST_URI $request_uri;
fastcgi_param DOCUMENT_URI $document_uri;
fastcgi_param DOCUMENT_ROOT $document_root;
fastcgi_param SERVER_PROTOCOL $server_protocol;
fastcgi_param REMOTE_ADDR $remote_addr;
fastcgi_param REMOTE_PORT $remote_port;
fastcgi_param SERVER_ADDR $server_addr;
fastcgi_param SERVER_PORT $server_port;
fastcgi_param SERVER_NAME $server_name;
# PHP only, required if PHP was built with –enable-force-cgi-redirect
fastcgi_param REDIRECT_STATUS 200;
4.5 啓動Nginx
ulimit -SHn 65535
/usr/local/webserver/nginx/sbin/nginx
5. 配置開機自動啓動Nginx + PHP
vi /etc/rc.local
ulimit -SHn 65535
/usr/local/webserver/php/sbin/php-fpm start
/usr/local/webserver/nginx/sbin/nginx
6. 優化Linux內核參數
vi /etc/sysctl.conf
# Add
net.ipv4.tcp_max_syn_backlog = 65536
net.core.netdev_max_backlog = 32768
net.core.somaxconn = 32768
net.core.wmem_default = 8388608
net.core.rmem_default = 8388608
net.core.rmem_max = 16777216
net.core.wmem_max = 16777216
net.ipv4.tcp_timestamps = 0
net.ipv4.tcp_synack_retries = 2
net.ipv4.tcp_syn_retries = 2
net.ipv4.tcp_tw_recycle = 1
#net.ipv4.tcp_tw_len = 1
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_mem = 94500000 915000000 927000000
net.ipv4.tcp_max_orphans = 3276800
#net.ipv4.tcp_fin_timeout = 30
#net.ipv4.tcp_keepalive_time = 120
net.ipv4.ip_local_port_range = 1024 65535
使配置立即生效
/sbin/sysctl -p