xx@linux:~/下載$ sudo sh '/home/xx/下載/hplip-3.19.12.run'
Creating directory hplip-3.19.12
Verifying archive integrity... All good.
Uncompressing HPLIP 3.19.12 Self Extracting Archive........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
warning: hplip-install should not be run as root.
HP Linux Imaging and Printing System (ver. 3.19.12)
HPLIP Installer ver. 5.1
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING fileformore details.
Installer log saved in: hplip-install_Fri-20-Dec-2019_16:54:36.log
\error: You are running the installer as root. It is highly recommended that you run the installer as
error: a regular (non-root) user. Do you still wish to continue?
Continue with installation (y=yes, n=no*, q=quit) ? y
note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.
INSTALLATION MODE
-----------------
Automatic mode will install the full HPLIP solution with the most common options.
Custom mode allows you to choose installation options to fit specific requirements.
Please choose the installation mode (a=automatic*, c=custom, q=quit): c
INTRODUCTION
------------
This installer will install HPLIP version 3.19.12 on your computer.
Please close any running package management systems now (YaST, Adept, Synaptic, Up2date, etc).
DISTRO/OS CONFIRMATION
----------------------
Distro appears to be Ubuntu 18.04.
Is "Ubuntu 18.04" your correct distro/OS and version (y=yes*, n=no, q=quit) ? y
DRIVER OPTIONS
--------------
Would you like to install Custom Discrete Drivers or Class Drivers ('d'= Discrete Drivers*,'c'= Class Drivers,'q'= Quit)? : d
Initializing. Please wait...
SELECT HPLIP OPTIONS
--------------------
You can selectwhich HPLIP options to enable. Some options require extra dependencies.
Do you wish to enable'Network/JetDirect I/O'(y=yes*, n=no, q=quit) ? y
Do you wish to enable'Graphical User Interfaces (Qt4)'(y=yes*, n=no, q=quit) ? n
Do you wish to enable'Graphical User Interfaces (Qt5)'(y=yes, n=no*, q=quit) ? n
Do you wish to enable'PC Send Fax support'(y=yes*, n=no, q=quit) ? y
Do you wish to enable'Scanning support'(y=yes*, n=no, q=quit) ? y
Do you wish to enable'HPLIP documentation (HTML)'(y=yes*, n=no, q=quit) ? n
INSTALLATION NOTES
------------------
Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu formore information. Disable the CD-ROM/DVD sourceif you do not have the Ubuntu installation media inserted in the drive.
Please read the installation notes. Press <enter> to continue or 'q' to quit:
SECURITY PACKAGES
-----------------
AppArmor is installed.
AppArmor protects the application from external intrusion attempts making the application secure
Would you like to have this installer install the hplip specific policy/profile (y=yes*, n=no, q=quit) ? y
RUNNING PRE-INSTALL COMMANDS
----------------------------
OK
RUNNING SCANJET DEPENDENCY COMMANDS
-----------------------------------
sudoapt-getinstall --assume-yes python-pip (Scanjet-depend step 1)sudo pip2 install --upgrade pip (Scanjet-depend step 2)sudoapt-getinstall --assume-yes libleptonica-dev (Scanjet-depend step 3)sudoapt-getinstall --assume-yes tesseract-ocr (Scanjet-depend step 4)sudoapt-getinstall --assume-yes libtesseract-dev (Scanjet-depend step 5)sudo -H pip2 install tesserocr (Scanjet-depend step 6)sudoapt-getinstall --assume-yes tesseract-ocr-all (Scanjet-depend step 7)sudoapt-getinstall --assume-yes libzbar-dev (Scanjet-depend step 8)sudoapt-getinstall --assume-yes python-zbar (Scanjet-depend step 9)sudo -H pip2 install opencv-python (Scanjet-depend step 10)
/
-
warning: Failed to install this Scanjet dependency package. Some Scanjet features will not work.
sudo -H pip2 install PyPDF2 (Scanjet-depend step 11)sudo -H pip2 install imutils (Scanjet-depend step 12)sudo -H pip2 install pypdfocr (Scanjet-depend step 13)sudo -H pip2 install scikit-image (Scanjet-depend step 14)
warning: Failed to install this Scanjet dependency package. Some Scanjet features will not work.
sudo -H pip2 install scipy (Scanjet-depend step 15)
warning: Failed to install this Scanjet dependency package. Some Scanjet features will not work.
OK
READY TO BUILD AND INSTALL
--------------------------
Ready to perform build and install. Press <enter> to continue or 'q' to quit:
PRE-BUILD COMMANDS
------------------
OK
BUILD AND INSTALL
-----------------
Running './configure --with-hpppddir=/usr/share/ppd/HP --libdir=/usr/lib --prefix=/usr --disable-qt4 --disable-qt5 --disable-doc-build --disable-cups-ppd-install --disable-foomatic-drv-install --disable-libusb01_build --disable-foomatic-ppd-install --disable-hpijs-install --disable-class-driver --disable-udev_sysfs_rules --disable-policykit --enable-cups-drv-install --enable-hpcups-install --enable-network-build --enable-dbus-build --enable-scan-build --enable-fax-build --enable-apparmor_build'
Please wait, this may take several minutes...
Command completed successfully.
Running 'make clean'
Please wait, this may take several minutes...
Command completed successfully.
Running 'make'
Please wait, this may take several minutes...
Command completed successfully.
Running 'sudo make install'
Please wait, this may take several minutes...
Command completed successfully.
Build complete.
POST-BUILD COMMANDS
-------------------
OK
HPLIP UPDATE NOTIFICATION
-------------------------
Do you want to check for HPLIP updates?. (y=yes*, n=no):
RESTART OR RE-PLUG IS REQUIRED
------------------------------
If you are installing a USB connected printer, and the printer was plugged in when you started this
installer, you will need to either restart your PC or unplug and re-plug in your printer (USB cable
only). If you choose to restart, run this command after restarting: hp-setup (Note: If you are using a
parallel connection, you will have to restart your PC. If you are using network/wireless, you can
ignore and continue).
Restart or re-plug in your printer (r=restart, p=re-plug in*, i=ignore/continue, q=quit): Please unplug and re-plugin your printer now. Press <enter> to continue or 'q' to quit:
PRINTER SETUP
-------------
Would you like to setup a printer now (y=yes*, n=no, q=quit) ? y
Please make sure your printer is connected and powered on at this time.
Do you want to setup printer in GUI mode? (u=GUI mode*, i=Interactive mode): i
Running 'hp-setup -i' command....
HP Linux Imaging and Printing System (ver. 3.19.12)
Printer/Fax Setup Utility ver. 9.0
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING fileformore details.
(Note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.)
--------------------------------
| SELECT CONNECTION (I/O) TYPE |
--------------------------------
Num Connection Description
Type
-------- ---------- ----------------------------------------------------------
0* usb Universal Serial Bus (USB)
1 net Network/Ethernet/Wireless (direct connection or JetDirect)
Enter number 0...1 for connection type(q=quit, enter=usb*) ? 1
Using connection type: net
error: No device selected/specified or that supports this functionality.
error: hp-setup failed. Please run hp-setup manually.
RE-STARTING HP_SYSTRAY
----------------------
warning: hp-systray should not be run as root/superuser.
HP Linux Imaging and Printing System (ver. 3.19.12)
System Tray Status Service ver. 2.0
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING fileformore details.
error: hp-systray cannot be run as root. Exiting.
