在使用SI過程中,我根據自己的使用習慣修改了它的默認快捷鍵,並且在配置文件中添加了一些人性化功能,下面一一介紹:
修改快捷鍵:Options->Key Assignments...
1.main window:Esc 2.Hight light:Middle Mouse
3.Go Back:Alt+z 4.Go Forward:Alt+x
5.Caller:Alt+c 6.Reference:Alt+r
7.Previous Link:Alt+a 8.Next Link:Alt+s
9.First Link:Alt+d
10.Go Line:Alt+g 11.Select Line:Alt+l
12.Symbol Win:Alt+q 13.Activate SW:Alt+w
14.Projcet Win:Alt+[ 15.Activate PW:Alt+]
16.Contex Win:Alt+, 17.Activate CW:Alt+.
18.Relation Win:Alt+; 19.Activate RW:Alt+'
20.Select All:Ctrl+a 21.Save All:Ctrl+Shift+a
22.Browse Project Symbols:Alt+b
添加一些配置文件宏,比如:註釋掉代碼:單行註釋、多行註釋,將選中內容註釋掉;在一行代碼的前、後添加註釋性文字等。
打開Projcet->Open project,選擇base,可以看到utils.em文件,將下列宏添加到該文件中,並在其他工程里加入該文件,
在上面介紹的快捷鍵添加方式裏找到該宏並自定義快捷鍵。
單行、多行註釋:
- macro MultiLineComment()
- {
- hwnd = GetCurrentWnd()
- selection = GetWndSel(hwnd)
- LnFirst = GetWndSelLnFirst(hwnd) //取首行行號
- LnLast = GetWndSelLnLast(hwnd) //取末行行號
- hbuf = GetCurrentBuf()
- if(GetBufLine(hbuf, 0) == "//magic-number:tph85666031"){
- stop
- }
- Ln = Lnfirst
- buf = GetBufLine(hbuf, Ln)
- len = strlen(buf)
- while(Ln <= Lnlast) {
- buf = GetBufLine(hbuf, Ln) //取Ln對應的行
- if(buf == ""){ //跳過空行
- Ln = Ln + 1
- continue
- }
- if(StrMid(buf, 0, 1) == "/") { //需要取消註釋,防止只有單字符的行
- if(StrMid(buf, 1, 2) == "/"){
- PutBufLine(hbuf, Ln, StrMid(buf, 2, Strlen(buf)))
- }
- }
- if(StrMid(buf,0,1) != "/"){ //需要添加註釋
- PutBufLine(hbuf, Ln, Cat("//", buf))
- }
- Ln = Ln + 1
- }
- SetWndSel(hwnd, selection)
- }
macro MultiLineComment()
{
hwnd = GetCurrentWnd()
selection = GetWndSel(hwnd)
LnFirst = GetWndSelLnFirst(hwnd) //取首行行號
LnLast = GetWndSelLnLast(hwnd) //取末行行號
hbuf = GetCurrentBuf()
if(GetBufLine(hbuf, 0) == "//magic-number:tph85666031"){
stop
}
Ln = Lnfirst
buf = GetBufLine(hbuf, Ln)
len = strlen(buf)
while(Ln <= Lnlast) {
buf = GetBufLine(hbuf, Ln) //取Ln對應的行
if(buf == ""){ //跳過空行
Ln = Ln + 1
continue
}
if(StrMid(buf, 0, 1) == "/") { //需要取消註釋,防止只有單字符的行
if(StrMid(buf, 1, 2) == "/"){
PutBufLine(hbuf, Ln, StrMid(buf, 2, Strlen(buf)))
}
}
if(StrMid(buf,0,1) != "/"){ //需要添加註釋
PutBufLine(hbuf, Ln, Cat("//", buf))
}
Ln = Ln + 1
}
SetWndSel(hwnd, selection)
}
將上面的代碼保存到utils.em文件,打開source insight,將該文件添加到工程中,然後在Options->Key Assignments中你就可以看到這個宏了,宏的名字是MultiLineComments,然後我們爲它分配快捷鍵“Ctrl + /”,然後就可以了。
這是一份添加“#ifdef 0”和“#endif”的宏代碼,定義快捷鍵爲Ctrl+#:
- macro AddMacroComment()
- {
- hwnd=GetCurrentWnd()
- sel=GetWndSel(hwnd)
- lnFirst=GetWndSelLnFirst(hwnd)
- lnLast=GetWndSelLnLast(hwnd)
- hbuf=GetCurrentBuf()
- if(LnFirst == 0) {
- szIfStart = ""
- }else{
- szIfStart = GetBufLine(hbuf, LnFirst-1)
- }
- szIfEnd = GetBufLine(hbuf, lnLast+1)
- if(szIfStart == "#if 0" && szIfEnd == "#endif") {
- DelBufLine(hbuf, lnLast+1)
- DelBufLine(hbuf, lnFirst-1)
- sel.lnFirst = sel.lnFirst – 1
- sel.lnLast = sel.lnLast – 1
- }else{
- InsBufLine(hbuf, lnFirst, "#if 0")
- InsBufLine(hbuf, lnLast+2, "#endif")
- sel.lnFirst = sel.lnFirst + 1
- sel.lnLast = sel.lnLast + 1
- }
- SetWndSel( hwnd, sel )
- }
macro AddMacroComment()
{
hwnd=GetCurrentWnd()
sel=GetWndSel(hwnd)
lnFirst=GetWndSelLnFirst(hwnd)
lnLast=GetWndSelLnLast(hwnd)
hbuf=GetCurrentBuf()
if(LnFirst == 0) {
szIfStart = ""
}else{
szIfStart = GetBufLine(hbuf, LnFirst-1)
}
szIfEnd = GetBufLine(hbuf, lnLast+1)
if(szIfStart == "#if 0" && szIfEnd == "#endif") {
DelBufLine(hbuf, lnLast+1)
DelBufLine(hbuf, lnFirst-1)
sel.lnFirst = sel.lnFirst – 1
sel.lnLast = sel.lnLast – 1
}else{
InsBufLine(hbuf, lnFirst, "#if 0")
InsBufLine(hbuf, lnLast+2, "#endif")
sel.lnFirst = sel.lnFirst + 1
sel.lnLast = sel.lnLast + 1
}
SetWndSel( hwnd, sel )
}
這份宏的代碼可以把光標所在的行註釋掉,定義快捷鍵爲Ctrl+*:
- macro CommentSingleLine()
- {
- hbuf = GetCurrentBuf()
- ln = GetBufLnCur(hbuf)
- str = GetBufLine (hbuf, ln)
- str = cat("/*",str)
- str = cat(str,"*/")
- PutBufLine (hbuf, ln, str)
- }
macro CommentSingleLine()
{
hbuf = GetCurrentBuf()
ln = GetBufLnCur(hbuf)
str = GetBufLine (hbuf, ln)
str = cat("/*",str)
str = cat(str,"*/")
PutBufLine (hbuf, ln, str)
}
將一行中鼠標選中部分註釋掉,定義快捷鍵爲Ctrl+shift+*:
- macro CommentSelStr()
- {
- hbuf = GetCurrentBuf()
- ln = GetBufLnCur(hbuf)
- str = GetBufSelText(hbuf)
- str = cat("/*",str)
- str = cat(str,"*/")
- SetBufSelText (hbuf, str)
- }
macro CommentSelStr()
{
hbuf = GetCurrentBuf()
ln = GetBufLnCur(hbuf)
str = GetBufSelText(hbuf)
str = cat("/*",str)
str = cat(str,"*/")
SetBufSelText (hbuf, str)
}
在一行代碼前添加註釋性文字,定義快捷鍵爲Alt+/:
在一行代碼前添加註釋性文字,定義快捷鍵爲Alt+\: