cisco 模擬器 dynamipsgui 模擬器模塊詳細介紹
爲了方便大家做實驗,免得一個一個去試,做這裏我把每個設備支持的模塊的信息都寫出來.(bat文件)
(針對剛剛接觸dynamips不久的朋友)
注意：保證你的IOS版本在12.2S以上,在模擬交換時候爲了保證實驗能成功.IOS版本在12.3以上
首先從C7200開始
Slot 0:
C7200-IO-FE <——> 支持1個Fastethernet接口
C7200-IO-2FE <——> 支持2個 Fastethernet接口 (DynamipsGUI 2.3 裏面沒有這個選項,想用只有自己添加了)
C7200-IO-GE-E <——> 插這個卡以後會同時出現2個端口,Ethernet0/0和GigabitEthernet0/0 (反正我沒有用到過這個卡)
注意:這三個卡只允許插在Slot0口,如果插入後面的slot口是無效的.
Slot 1-5:
PA-2FE-TX <——> 支持2個Fastethernet接口
PA-FE-TX <——> 支持1個Fastethernet接口
PA-4E <——> 支持4個Ethernet接口
PA-4T+ <——> 支持4個serial接口
PA-8E <——> 支持8個Ethernet接口
PA-8T <——> 支持8個serial接口
PA-A1 <——> 支持1個ATM port adapter接口
PA-GE <——> 支持1個GigabitEthernet接口
PA-POS-OC3<——> 支持1個Packet Over SONET/SDH接口(用於更高速度的接口)
然後是C3600(3620/3640/3660)
NM-16ESW <——> 支持16個Fastethernet接口(交換模塊,在使用此模塊做交換實驗時候,請使用no ip routing 關閉端口路由)
NM-1E <——> 支持1個Ethernet接口
NM-1FE-TX<——> 支持1個Fastethernet接口
NM-4E <——> 支持4個Ethernet接口
NM-4T <——> 支持4個serial接口
Leopard-2FE<——>支持2個Fastethernet接口(3660專用,並且只能在slot 0 下使用)
注意:3620只能使用2個slot,3640可以使用4個slot,除Leopard-2FE模塊做了限制,其他模塊沒有做限制插具體哪個slot.(DynamipsGUI裏對slot已經做了限制,最近DynamipSeeV2.0已經發布了,但是裏面不支持3660)
c3725/c3745/c2691
GT96100-FE <——>支持2個Fastethernet接口(只限制在slot 0)
NM-16ESW <——>支持16個Fastethernet接口(不做重複說明)
NM-1FE-TX <——>支持1個Fastethernet接口
NM-4T <——>支持4個serial接口
c2600(2610/2611/2620/2621/2610XM/2620XM/2650XM)
NM-16ESW <——> 支持16個Fastethernet接口
NM-1E <——> 支持1個Ethernet接口
NM-1FE-TX<——> 支持1個Fastethernet接口
NM-4E <——> 支持4個Ethernet接口
CISCO2600-MB-2E<——>支持2個Ethernet接口
CISCO2600-MB-2FE<——>支持2個Fastethernet接口
注>DynamipsGUI裏的模塊CISCO2600-MB-2E,CISCO2600-MB-2FE,並且只有2620類型可選
Dynamipsee裏有2610/2611/2620/2621/2610XM/2620XM/2650XM類型選擇.但沒有2610/2611/2620/2621/2610XM/2620XM/2650XM
建議找個小的IOS把2600模擬成主機用 C2600IOS
===========1700s===========
1710
Slots: 0 (available)
WIC slots: 0
CISCO1710-MB-1FE-1E (1FastEthernet port and 1 Ethernet port, automatically used)
Note, interfaces do notuse a slot designation (e.g. “f0”)
1720
Note, interfaces do notuse a slot designation (e.g. “f0”)
1721
Note, interfaces do notuse a slot designation (e.g. “f0”)
1750
Note, interfaces do notuse a slot designation (e.g. “f0”)
1751
1760
Slots: 0 (available)
WIC slots: 2
C1700-MB-1ETH (1FastEthernet port, automatically used)
Cards:
- WIC-1T (1 Serial port)
- WIC-2T (2 Serialports)
- WIC-1ENET (1 Ethernetports)
===========2600s===========
2610
Slots: 1 (available)
WIC slots: 3
CISCO2600-MB-1E (1Ethernet port, automatically used)
2611
Slots: 1 (available)
WIC slots: 3
CISCO2600-MB-2E (2Ethernet ports, automatically used)
2620
Slots: 1 (available)
WIC slots: 3
CISCO2600-MB-1FE (1FastEthernet port, automatically used)
2621
Slots: 1 (available)
WIC slots: 3
CISCO2600-MB-2FE (2FastEthernet ports, automatically used)
2610XM
Slots: 1 (available)
WIC slots: 3
CISCO2600-MB-1FE (1 FastEthernetport, automatically used)
2611XM
Slots: 1 (available)
WIC slots: 3
CISCO2600-MB-2FE (2FastEthernet ports, automatically used)
2620XM
Slots: 1 (available)
WIC slots: 3
CISCO2600-MB-1FE (1FastEthernet port, automatically used)
2621XM
Slots: 1 (available)
WIC slots: 3
CISCO2600-MB-2FE (2FastEthernet ports, automatically used)
2650XM
Slots: 1 (available)
WIC slots: 3
CISCO2600-MB-1FE (1FastEthernet port, automatically used)
2651XM
Slots: 1 (available)
WIC slots: 3
CISCO2600-MB-2FE (2FastEthernet ports, automatically used)
Cards:
- NM-1E (Ethernet, 1 port)
- NM-4E (Ethernet, 4 ports)
- NM-1FE-TX (FastEthernet, 1 port)
- NM-16ESW (Ethernetswitch module, 16 ports)
- NM-NAM
- NM-IDS
- WIC-1T (1 Serial port)
- WIC-2T (2 Serialports)
===========3600s===========
3660
Slots: 6 (available)
3640
Slots: 4
3620
Slots: 2
Cards:
- NM-1E (Ethernet, 1 port)
- NM-4E (Ethernet,4 ports)
- NM-1FE-TX (FastEthernet, 1 port)
- NM-16ESW (Ethernetswitch module, 16 ports)
- NM-4T (Serial,4 ports)
- Leopard-2FE (Cisco3660 FastEthernet in slot 0, automatically used)
===========3700s===========
2691 (The 2691 isessentially a 3700 with 1 slot)
Slots: 1 (available)
WIC slots: 3
3725
Slots: 2 (available)
WIC slots: 3
3745
Slots: 4 (available)
WIC slots: 3
Cards:
- NM-1FE-TX (FastEthernet, 1 port)
- NM-4T (Serial,4 ports)
- NM-16ESW (Ethernetswitch module, 16 ports)
- GT96100-FE (2integrated ports, automatically used)
- NM-NAM
- NM-IDS
- WIC-1T (1 Serial port)
- WIC-2T (2 Serialports)
===========7200s===========
7206
Slots: 6 (available)
Chassis types:
- STD
- VXR
NPEs:
- NPE-100
- NPE-150
- NPE-175
- NPE-200
- NPE-225
- NPE-300
- NPE-400
- NPE-G1
- NPE-G2 (Requires the useof NPE-G2 IOS images)
Cards:
- C7200-IO-FE (FastEthernet, slot 0 only)
- C7200-IO-2FE (FastEthernet,2 ports, slot 0 only)
- C7200-IO-GE (GigabitEthernet, slot 0 only)
- PA-FE-TX (FastEthernet)
- PA-2FE-TX (FastEthernet, 2ports)
- PA-4E (Ethernet, 4 ports)
- PA-8E (Ethernet, 8 ports)
- PA-4T+ (Serial, 4 ports)
- PA-8T (Serial, 8 ports)
- PA-A1 (ATM)
- PA-POS-OC3 (POS)
- PA-GE (GigabitEthernet)