1.1. 開始使用re
Python通過re模塊提供對正則表達式的支持。使用re的一般步驟是先將正則表達式的字符串形式編譯爲Pattern實例,然後使用Pattern實例處理文本並獲得匹配結果(一個Match實例),最後使用Match實例獲得信息,進行其他的操作。
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 |
# encoding: UTF-8 importre
# 將正則表達式編譯成Pattern對象 pattern=re.compile(r'hello')
# 使用Pattern匹配文本,獲得匹配結果,無法匹配時將返回None match=pattern.match('hello world!')
ifmatch: # 使用Match獲得分組信息 printmatch.group()
### 輸出 ### # hello |
re.compile(strPattern[, flag]):
這個方法是Pattern類的工廠方法,用於將字符串形式的正則表達式編譯爲Pattern對象。 第二個參數flag是匹配模式,取值可以使用按位或運算符'|'表示同時生效,比如re.I | re.M。另外,你也可以在regex字符串中指定模式,比如re.compile('pattern', re.I | re.M)與re.compile('(?im)pattern')是等價的。
可選值有:
· re.I(re.IGNORECASE): 忽略大小寫(括號內是完整寫法,下同)
· M(MULTILINE): 多行模式,改變'^'和'$'的行爲(參見上圖)
· S(DOTALL): 點任意匹配模式,改變'.'的行爲
· L(LOCALE): 使預定字符類 \w \W \b \B \s \S 取決於當前區域設定
· U(UNICODE): 使預定字符類 \w \W \b \B \s \S \d \D 取決於unicode定義的字符屬性
· X(VERBOSE): 詳細模式。這個模式下正則表達式可以是多行,忽略空白字符,並可以加入註釋。以下兩個正則表達式是等價的:
1 2 3 4 |
a=re.compile(r"""\d + # the integral part \. # the decimal point \d * # some fractional digits""", re.X) b=re.compile(r"\d+\.\d*") |
re提供了衆多模塊方法用於完成正則表達式的功能。這些方法可以使用Pattern實例的相應方法替代,唯一的好處是少寫一行re.compile()代碼,但同時也無法複用編譯後的Pattern對象。這些方法將在Pattern類的實例方法部分一起介紹。如上面這個例子可以簡寫爲:
1 2 |
m=re.match(r'hello','hello world!') printm.group() |
re模塊還提供了一個方法escape(string),用於將string中的正則表達式元字符如*/+/?等之前加上轉義符再返回,在需要大量匹配元字符時有那麼一點用。
1.2. Match
Match對象是一次匹配的結果,包含了很多關於此次匹配的信息,可以使用Match提供的可讀屬性或方法來獲取這些信息。
屬性:
1 string: 匹配時使用的文本。
2 re: 匹配時使用的Pattern對象。
3 pos: 文本中正則表達式開始搜索的索引。值與Pattern.match()和Pattern.seach()方法的同名參數相同。
4 endpos: 文本中正則表達式結束搜索的索引。值與Pattern.match()和Pattern.seach()方法的同名參數相同。
5 lastindex: 最後一個被捕獲的分組在文本中的索引。如果沒有被捕獲的分組,將爲None。
6 lastgroup: 最後一個被捕獲的分組的別名。如果這個分組沒有別名或者沒有被捕獲的分組,將爲None。
方法:
7 group([group1, …]):
獲得一個或多個分組截獲的字符串;指定多個參數時將以元組形式返回。group1可以使用編號也可以使用別名;編號0代表整個匹配的子串;不填寫參數時,返回group(0);沒有截獲字符串的組返回None;截獲了多次的組返回最後一次截獲的子串。
8 groups([default]):
以元組形式返回全部分組截獲的字符串。相當於調用group(1,2,…last)。default表示沒有截獲字符串的組以這個值替代,默認爲None。
9 groupdict([default]):返回以有別名的組的別名爲鍵、以該組截獲的子串爲值的字典,沒有別名的組不包含在內。default含義同上。
10 start([group]):
返回指定的組截獲的子串在string中的起始索引(子串第一個字符的索引)。group默認值爲0。
11 end([group]):返回指定的組截獲的子串在string中的結束索引(子串最後一個字符的索引+1)。group默認值爲0。
12 span([group]):返回(start(group), end(group))。
13 expand(template):
將匹配到的分組代入template中然後返回。template中可以使用\id或\g<id>、\g<name>引用分組,但不能使用編號0。\id與\g<id>是等價的;但\10將被認爲是第10個分組,如果你想表達\1之後是字符'0',只能使用\g<1>0。
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 |
importre m=re.match(r'(\w+) (\w+)(?P<sign>.*)','hello world!')
print"m.string:", m.string print"m.re:", m.re print"m.pos:", m.pos print"m.endpos:", m.endpos print"m.lastindex:", m.lastindex print"m.lastgroup:", m.lastgroup
print"m.group(1,2):", m.group(1,2) print"m.groups():", m.groups() print"m.groupdict():", m.groupdict() print"m.start(2):", m.start(2) print"m.end(2):", m.end(2) print"m.span(2):", m.span(2) printr"m.expand(r'\2 \1\3'):", m.expand(r'\2 \1\3')
### output ### # m.string: hello world! # m.re: <_sre.SRE_Pattern object at 0x016E1A38> # m.pos: 0 # m.endpos: 12 # m.lastindex: 3 # m.lastgroup: sign # m.group(1,2): ('hello', 'world') # m.groups(): ('hello', 'world', '!') # m.groupdict(): {'sign': '!'} # m.start(2): 6 # m.end(2): 11 # m.span(2): (6, 11) # m.expand(r'\2 \1\3'): world hello! |
1.3. Pattern
Pattern對象是一個編譯好的正則表達式,通過Pattern提供的一系列方法可以對文本進行匹配查找。
Pattern不能直接實例化,必須使用re.compile()進行構造。
Pattern提供了幾個可讀屬性用於獲取表達式的相關信息:
14 pattern: 編譯時用的表達式字符串。
15 flags: 編譯時用的匹配模式。數字形式。
16 groups: 表達式中分組的數量。
17 groupindex: 以表達式中有別名的組的別名爲鍵、以該組對應的編號爲值的字典,沒有別名的組不包含在內。
1 2 3 4 5 6 7 8 9 10 11 12 13 |
importre p=re.compile(r'(\w+) (\w+)(?P<sign>.*)', re.DOTALL)
print"p.pattern:", p.pattern print"p.flags:", p.flags print"p.groups:", p.groups print"p.groupindex:", p.groupindex
### output ### # p.pattern: (\w+) (\w+)(?P<sign>.*) # p.flags: 16 # p.groups: 3 # p.groupindex: {'sign': 3} |
實例方法[ | re模塊方法]:
18 match(string[, pos[, endpos]]) | re.match(pattern, string[, flags]):這個方法將從string的pos下標處起嘗試匹配pattern;如果pattern結束時仍可匹配,則返回一個Match對象;如果匹配過程中pattern無法匹配,或者匹配未結束就已到達endpos,則返回None。
pos和endpos的默認值分別爲0和len(string);re.match()無法指定這兩個參數,參數flags用於編譯pattern時指定匹配模式。
注意:這個方法並不是完全匹配。當pattern結束時若string還有剩餘字符,仍然視爲成功。想要完全匹配,可以在表達式末尾加上邊界匹配符'$'。
示例參見2.1小節。
search(string[, pos[, endpos]]) | re.search(pattern, string[, flags]):這個方法用於查找字符串中可以匹配成功的子串。從string的pos下標處起嘗試匹配pattern,如果pattern結束時仍可匹配,則返回一個Match對象;若無法匹配,則將pos加1後重新嘗試匹配;直到pos=endpos時仍無法匹配則返回None。
pos和endpos的默認值分別爲0和len(string));re.search()無法指定這兩個參數,參數flags用於編譯pattern時指定匹配模式。
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 |
# encoding: UTF-8 importre
# 將正則表達式編譯成Pattern對象 pattern=re.compile(r'world')
# 使用search()查找匹配的子串,不存在能匹配的子串時將返回None # 這個例子中使用match()無法成功匹配 match=pattern.search('hello world!')
ifmatch: # 使用Match獲得分組信息 printmatch.group()
### 輸出 ### # world |
split(string[, maxsplit]) | re.split(pattern, string[, maxsplit]):按照能夠匹配的子串將string分割後返回列表。maxsplit用於指定最大分割次數,不指定將全部分割。
?
1 2 3 4 5 6 7 |
importre
p=re.compile(r'\d+') printp.split('one1two2three3four4')
### output ### # ['one', 'two', 'three', 'four', ''] |
findall(string[, pos[, endpos]]) | re.findall(pattern, string[, flags]):搜索string,以列表形式返回全部能匹配的子串。
?
1 2 3 4 5 6 7 |
importre
p=re.compile(r'\d+') printp.findall('one1two2three3four4')
### output ### # ['1', '2', '3', '4'] |
finditer(string[, pos[, endpos]]) | re.finditer(pattern, string[, flags]):搜索string,返回一個順序訪問每一個匹配結果(Match對象)的迭代器。
1 2 3 4 5 6 7 8 |
Import re
p=re.compile(r'\d+') For m in p.finditer('one1two2three3four4'): Print m.group(),
### output ### # 1 2 3 4 |
sub(repl, string[, count]) | re.sub(pattern, repl, string[, count]):使用repl替換string中每一個匹配的子串後返回替換後的字符串。
當repl是一個字符串時,可以使用\id或\g<id>、\g<name>引用分組,但不能使用編號0。
當repl是一個方法時,這個方法應當只接受一個參數(Match對象),並返回一個字符串用於替換(返回的字符串中不能再引用分組)。
count用於指定最多替換次數,不指定時全部替換。
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 |
importre
p=re.compile(r'(\w+) (\w+)') s='i say, hello world!'
printp.sub(r'\2 \1', s)
deffunc(m): returnm.group(1).title()+' '+m.group(2).title()
printp.sub(func, s)
### output ### # say i, world hello! # I Say, Hello World! |
subn(repl, string[, count]) |re.sub(pattern, repl, string[, count]):返回 (sub(repl, string[, count]), 替換次數)。
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 |
importre
p=re.compile(r'(\w+) (\w+)') s='i say, hello world!'
printp.subn(r'\2 \1', s)
deffunc(m): returnm.group(1).title()+' '+m.group(2).title()
printp.subn(func, s)
### output ### # ('say i, world hello!', 2) # ('I Say, Hello World!', 2) |
以上就是Python對於正則表達式的支持。熟練掌握正則表達式是每一個程序員必須具備的技能,這年頭沒有不與字符串打交道的程序了。筆者也處於初級階段,與君共勉,^_^
另外,圖中的特殊構造部分沒有舉出例子,用到這些的正則表達式是具有一定難度的。有興趣可以思考一下,如何匹配不是以abc開頭的單詞,^_^
全文結束