在配置完zookeeper集羣后,三個節點,分別啓動三個節點如下:
[root@master bin]# zkServer.sh start
JMX enabled by default
Using config: /usr/local/zk/bin/../conf/zoo.cfg
Starting zookeeper ... STARTED
在查看zookeeper狀態時遇到
[root@master bin]# zkServer.sh status
JMX enabled by default
Using config: /usr/local/zk/bin/../conf/zoo.cfg
Error contacting service. It is probably not running.
而其他兩個節點卻是現實正常;最後檢查配置zoo.cfg配置發現是該節點的主機名寫錯了;先停止三個節點zookeeper服務,逐一的修改節點上zoo.cfg配置文件,在逐一的啓動 ,結果顯示正常;