ZooKeeper服務端啓動過程——集羣模式

本文主要對ZooKeeper服務端集羣模式的啓動過程進行簡要說明。
整個集羣的啓動是由QuorumPeerMain這個類負責執行的。在該類的main方法中執行initialzeAndRun()方法，代碼如下

protected void initializeAndRun(String[] args)
        throws ConfigException, IOException, AdminServerException
    {
        QuorumPeerConfig config = new QuorumPeerConfig();
        if (args.length == 1) {
            config.parse(args[0]);
        }
        // Start and schedule the the purge task
        DatadirCleanupManager purgeMgr = new DatadirCleanupManager(config
                .getDataDir(), config.getDataLogDir(), config
                .getSnapRetainCount(), config.getPurgeInterval());
        purgeMgr.start();

        if (args.length == 1 && config.isDistributed()) {
            runFromConfig(config);
        } else {
            LOG.warn("Either no config or no quorum defined in config, running "
                    + " in standalone mode");
            // there is only server in the quorum -- run as standalone
            ZooKeeperServerMain.main(args);
        }
    }

通過解析配置文件獲取服務器的地址，判斷本次啓動過程是單機模式還是集羣模式。如果是集羣模式，會執行QuorumPeerMain的runFromConfig()開始集羣模式的啓動過程。與單機模式不同的是，單機模式的啓動，在這裏會由ZooKeeperServerMain這個類負責執行，而集羣模式，會繼續由QuorumPeerMain負責。

至此，整個啓動過程已經完成了：

• 創建並且啓動一個歷史文件清理器DatadirCleanupManager

runFromConfig()方法的代碼如下：

public void runFromConfig(QuorumPeerConfig config)
            throws IOException, AdminServerException
    {
      try {
          ManagedUtil.registerLog4jMBeans();
      } catch (JMException e) {
          LOG.warn("Unable to register log4j JMX control", e);
      }

      LOG.info("Starting quorum peer");
      try {
          ServerCnxnFactory cnxnFactory = null;
          ServerCnxnFactory secureCnxnFactory = null;

          if (config.getClientPortAddress() != null) {
              cnxnFactory = ServerCnxnFactory.createFactory();
              cnxnFactory.configure(config.getClientPortAddress(),
                      config.getMaxClientCnxns(),
                      false);
          }

          if (config.getSecureClientPortAddress() != null) {
              secureCnxnFactory = ServerCnxnFactory.createFactory();
              secureCnxnFactory.configure(config.getSecureClientPortAddress(),
                      config.getMaxClientCnxns(),
                      true);
          }

          quorumPeer = getQuorumPeer();
          quorumPeer.setTxnFactory(new FileTxnSnapLog(
                      config.getDataLogDir(),
                      config.getDataDir()));
          quorumPeer.enableLocalSessions(config.areLocalSessionsEnabled());
          quorumPeer.enableLocalSessionsUpgrading(
              config.isLocalSessionsUpgradingEnabled());
          //quorumPeer.setQuorumPeers(config.getAllMembers());
          quorumPeer.setElectionType(config.getElectionAlg());
          quorumPeer.setMyid(config.getServerId());
          quorumPeer.setTickTime(config.getTickTime());
          quorumPeer.setMinSessionTimeout(config.getMinSessionTimeout());
          quorumPeer.setMaxSessionTimeout(config.getMaxSessionTimeout());
          quorumPeer.setInitLimit(config.getInitLimit());
          quorumPeer.setSyncLimit(config.getSyncLimit());
          quorumPeer.setConfigFileName(config.getConfigFilename());
          quorumPeer.setZKDatabase(new ZKDatabase(quorumPeer.getTxnFactory()));
          quorumPeer.setQuorumVerifier(config.getQuorumVerifier(), false);
          if (config.getLastSeenQuorumVerifier()!=null) {
              quorumPeer.setLastSeenQuorumVerifier(config.getLastSeenQuorumVerifier(), false);
          }
          quorumPeer.initConfigInZKDatabase();
          quorumPeer.setCnxnFactory(cnxnFactory);
          quorumPeer.setSecureCnxnFactory(secureCnxnFactory);
          quorumPeer.setLearnerType(config.getPeerType());
          quorumPeer.setSyncEnabled(config.getSyncEnabled());
          quorumPeer.setQuorumListenOnAllIPs(config.getQuorumListenOnAllIPs());

          // sets quorum sasl authentication configurations
          quorumPeer.setQuorumSaslEnabled(config.quorumEnableSasl);
          if(quorumPeer.isQuorumSaslAuthEnabled()){
              quorumPeer.setQuorumServerSaslRequired(config.quorumServerRequireSasl);
              quorumPeer.setQuorumLearnerSaslRequired(config.quorumLearnerRequireSasl);
              quorumPeer.setQuorumServicePrincipal(config.quorumServicePrincipal);
              quorumPeer.setQuorumServerLoginContext(config.quorumServerLoginContext);
              quorumPeer.setQuorumLearnerLoginContext(config.quorumLearnerLoginContext);
          }
          quorumPeer.setQuorumCnxnThreadsSize(config.quorumCnxnThreadsSize);
          quorumPeer.initialize();

          quorumPeer.start();
          quorumPeer.join();
      } catch (InterruptedException e) {
          // warn, but generally this is ok
          LOG.warn("Quorum Peer interrupted", e);
      }
    }

在runFromConfig中做的工作可以歸納如下

• 創建ServerCnxnFactory，並完成對他的一些配置
• 創建一個QuorumPeer類的對象實例，這個東西是ZooKeeper服務器的託管者，其實就可以把它看成是集羣中的一臺服務器。在集羣的運行過程中，由它來對服務器的運行狀態進行檢測，在需要的時候發起Leader選舉

• 爲QuorumPeer類的對象實例註冊一些核心的功能組件。包括：

  1. FileTxnSnapLog，數據文件管理器，包括事務日誌文件和快照數據文件
  2. ZKDatabase
  3. ServerCnxnFactory

• 執行QuorumPeer的start()方法

public synchronized void start() {
        if (!getView().containsKey(myid)) {
            throw new RuntimeException("My id " + myid + " not in the peer list");
         }
        loadDataBase();
        startServerCnxnFactory();
        try {
            adminServer.start();
        } catch (AdminServerException e) {
            LOG.warn("Problem starting AdminServer", e);
            System.out.println(e);
        }
        startLeaderElection();
        super.start();
    }

在start()方法裏主要完成以下幾個工作

• 同時數據，loadDataBase();
• 啓動ServerCnxnFactory主線程，startServerCnxnFactory();
• 開啓Leader選舉流程，startLeaderElection();