先貼代碼,後面做一些簡單說明
public static string sendPostHttpRequest_2(string url, byte[] postBytes, string contentType= "multipart/form-data; boundary=--------------------------71b23e4066ed")
{
string delimiter = "--------------------------71b23e4066ed";
string eol = Environment.NewLine;
string head = delimiter + eol
+ "Content-Disposition: form-data;piclen=" + postBytes.Length + eol
+ "Content-Type:image/jpeg" + "\r\n\r\n";
string foot = "\r\n" + delimiter + "--\r\n";
byte[] h_c = new ASCIIEncoding().GetBytes(head);
byte[] f_c = new ASCIIEncoding().GetBytes(foot);
WebRequest request = (WebRequest)HttpWebRequest.Create(url);
request.Method = "POST";
request.ContentType = contentType;
request.ContentLength = postBytes.Length+ h_c.Length+f_c.Length;
using (Stream outstream = request.GetRequestStream())
{
outstream.Write(h_c, 0, h_c.Length);//輸出head
outstream.Write(postBytes, 0, postBytes.Length);//輸出圖片字節
outstream.Write(f_c, 0, f_c.Length);//輸出尾部
}
string result = string.Empty;
using (WebResponse response = request.GetResponse())
{
if (response != null)
{
using (Stream stream = response.GetResponseStream())
{
using (StreamReader reader = new StreamReader(stream, Encoding.UTF8))
{
result = reader.ReadToEnd();
}
}
}
}
return result;
}
說明:
1)上面的代碼中我的boundary=xxx是寫死的,因爲我對接的接口對方已經寫死只獲取這個分隔符.正常時候這裏是會根據當前時間獲取一個動態的字符串當做分隔符
2)輸出的時候, outstream.Write 以前我的思路是先把參數拼接好以後直接一個輸出就好了.結果拼接了好幾個,發送出去以後對方都不能正常解析.最後在參考了一篇其他文章以後才恍然大悟.我可以分層次的輸出呀.
備註:
下面放了一個很有啓發的知識:
======================================開始
流:二進制
字節:無符號整數
字符:Unicode編碼字符
字符串:多個Unicode編碼字符
那麼在.net下它們之間如何轉化呢?
一般是遵守以下規則:
流->字節數組->字符數組->字符串
下面就來具體談談轉化的語法
流->字節數組
MemoryStream ms = new MemoryStream();
byte[] buffer = new byte[ms.Length];
ms.Read(buffer, 0, (int)ms.Length);
字節數組->流
byte[] buffer = new byte[10];
MemoryStream ms = new MemoryStream(buffer);
字節數組->字符數組
1.
byte[] buffer = new byte[10];
char[] ch = new ASCIIEncoding().GetChars(buffer);
//或者:char[] ch = Encoding.UTF8.GetChars(buffer)
2.
byte[] buffer = new byte[10];
char[] ch = new char[10];
for(int i=0; i<buffer.Length; i++)
{
ch[i] = Convert.ToChar(buffer[i]);
}
字符數組->字節數組
1.
char[] ch = new char[10];
byte[] buffer = new ASCIIEncoding().GetBytes(ch);
//或者:byte[] buffer = Encoding.UTF8.GetBytes(ch)
2.
char[] ch = new char[10];
byte[] buffer = new byte[10];
for(int i=0; i<ch.Length; i++)
{
buffer[i] = Convert.ToByte(ch[i]);
}
字符數組->字符串
char[] ch = new char[10];
string str = new string(ch);
字符串->字符數組
string str = "abcde";
char[] ch=str .ToCharArray();
字節數組->字符串
byte[] buffer = new byte[10];
string str = System.Text.Encoding.UTF8.GetString(buffer);
//或者:string str = new ASCIIEncoding().GetString(buffer);
字符串->字節數組
string str = "abcde";
byte[] buffer=System.Text.Encoding.UTF8.GetBytes(str);
//或者:byte[] buffer= new ASCIIEncoding().GetBytes(str);
以上轉的是 https://www.cnblogs.com/cc1120/p/9139454.html
======================================結束
在我的想法中,把所有的參數先轉換爲字符數組,然後拼接head,圖片字節轉換的字符數組,結束字符數組,然後把字符數組轉換爲字節進行發送.猜測應該是可行的,不過我自己在實際應用中是沒有成功,可能是某一步轉換格式的問題.因爲項目要求太緊就沒有繼續嘗試.
對了還有下面的一個知識點,有人知道是這樣的嗎?我是沒有研究過不知道是不是.希望有大佬可以回答一下
文章地址是 https://blog.csdn.net/elie_yang/article/details/80710059