Change default rpm build root.
# cat ~/.rpmmacros %_topdir /images/yanjunz/rpmbuild/
一、前言 簡單的說,如果要使用Device Tree,首先用戶要了解自己的硬件配置和系統運行參數,並把這些信息組織成Device Tree source file。通過DTC(Device Tree Compiler),可以將這些
============================================================================= 原文地址:http://blog.micro-studios.com/?p
一.什麼是DTS?爲什麼要引入DTS? DTS即Device Tree Source 設備樹源碼, Device Tree是一種描述硬件的數據結構,它起源於 OpenFirmware (OF)。 在Linux 2.6中,ARM架構
概述 內核引導參數大體上可以分爲兩類:一類與設備無關、另一類與設備有關。內核源碼樹下的 Documentation/kernel-parameters.txt 文件列出了所有可用的引導參數,並指明瞭處理每個參數的具體文件。注意:對於模
1. 如果.config不存在,運行make config/menuconfig時的缺省設置由固化在各個Kconfig文件中各項目的缺省值決定。2. 如果.config存在,運行make config/menuconfig時的缺省設置即是
Linux 內核配置方式詳解 在做Virtualization這段時間,編譯過多次Linux kernel,編譯Kernel過程中配置config這一步是相對來說比較複雜的。對編譯內核過程中的配置這一步做詳細的說明吧,總結一下,多數內
內核編譯過程 從頂層makefile查找以理關係如下 Created with Raphaël 2.2.0arch/arm/boot/Makefile(zImage)arch/arm/boot/compressed/Makefil
修復nanopi t2 cpu調頻不起作用 nanopi t2 s5p4418超頻 驅動相關文件 內核版本:linux-3.4.y 相關代碼: drivers/cpufreq/nxp-cpufreq.c 驅動主邏輯 drivers
spi系列文章: 1.spi 硬件、協議 2.spi(GPIO模擬) 3.spi驅動 設置時鐘 spi在arm-cortex系列當中一般與ssp聯繫一起。ssp兼容spi,兩者區別也不大。在4418上面沒有用spi模式調試成功,用
文章目錄Linux內存管理第四章 -- 進程地址空間(Process Address Space)Linear Address SpaceManaging the Address SpaceProcess Address Spac
文章目錄Linux內存管理第二章 -- Describing Physical MemoryNodesZonesZone初始化mem_map初始化Pagespage定義映射 Pages 到 Zones高端內存--High Memo
文章目錄Linux內存管理第六章 -- Physical Page AllocationManaging Free BlocksBuddy Alocator初始化源碼分析Allocating PagesBuddy Allocato
文章目錄Linux內存管理第八章 -- Slab AllocatorCachesCache DescriptorCache Static FlagsCache Dynamic FlagsCache Allocation Flags
文章目錄Linux內存管理第十章 -- 頁框回收(Page Frame Reclamation)頁替換策略(Page Replacement Policy)Page CachePage Cache Hash TableAdding
文章目錄Linux內存管理第十一章 -- Swap ManagementDescribing the Swap AreaMapping Page Table Entries to Swap EntriesAllocating a