聯想 卲陽E46L支持Ethnet和 無線網, 從 ubuntu終端輸入:
$lspci
06:00.0 Network controller: Broadcom Corporation Device 4727 (rev 01)
08:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01)
都是 broadcom公司的
Ethnet的 型號爲 57780
http://www.broadcom.com/support/ethernet_nic/netlink_k57.php
從 以上 網址下 載網卡 驅動
a, linux-3.129d.zip
b, Broadcom_NetLink-NetXtreme_DTM_15.4.pdf
BUILDING THE DRIVER FROM THE SOURCE TAR FILE
1. Create a directory (tg3-version) and extract the TAR files to the directory.
tar xvzf tg3-version.tgz
2. Build the driver tg3.o as a loadable module for the running kernel.
cd tg3-version
make clean
make; make install
3. Test the driver by loading it.
rmmod tg3
modprobe tg3
No message should be returned if this command runs properly.
接下 來 就 是 配置撥號網絡:
在 ubuntu左上 點 擊, 出 現 VPN connection->configure VPN......, 出現 network connection對話 框, 點擊DSL, 出 現"Editing DSL connection 1"對 話 框,
輸入:
Username:
service:
password:
這樣 網絡配 置成 功