重燒內核之後初始化失敗

正常情況下串口的信息：
INFO: CReg2440Uart::CReg2440Uart using processor frequency reported by the OAL (66666666).
INFO: CReg2440Uart::CReg2440Uart using processor frequency reported by the OAL (66666666).
INFO: WAVEDEV.DLL: SetI2SClockRate:  Using processor frequency reported by the OAL (66666666).
Prescaler:3
CIS_Init----
Cam_Init----
Camera I/F Reset
CAM clock:24000000
CamClockOn = 1
Camera Module Reset
Use IIC for initialization
ID=0x96
ID=0x96
ID=0x96
ID=0x96
ID=0x96
CAMERA.DLL::InterruptThread Initialized.
現在進不了系統了，停在這裏：
INFO: CReg2440Uart::CReg2440Uart using processor frequency reported by the OAL (66666666).
INFO: CReg2440Uart::CReg2440Uart using processor frequency reported by the OAL (66666666).

也不知道出什麼問題了，這兩天一直在編譯燒內核，有時成功有時就卡在這裏了，不知道是不是我改動的原因，還在編譯，明天繼續試。