用HSRP作冗餘時，兩個VLAN之間不能實現

網絡拓撲圖：

 

配置如下：

R1:

R1#sh run
Building configuration...

Current configuration : 1468 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R1
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
memory-size iomem 5
!
!
ip cef
no ip domain lookup
!
!
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface FastEthernet0/0
 no ip address
 shutdown
 duplex auto
 speed auto
!
interface FastEthernet1/0
 switchport access vlan 10
!
interface FastEthernet1/1
 switchport access vlan 20
!
interface FastEthernet1/2
 switchport access vlan 20
!
interface FastEthernet1/3
!
interface FastEthernet1/4
!
interface FastEthernet1/5
!
interface FastEthernet1/6
!
interface FastEthernet1/7
!
interface FastEthernet1/8
!
interface FastEthernet1/9
!
interface FastEthernet1/10
!
interface FastEthernet1/11
!
interface FastEthernet1/12
!
interface FastEthernet1/13
!
interface FastEthernet1/14
!
interface FastEthernet1/15
!
interface Vlan1
 no ip address
!
interface Vlan10
 ip address 192.168.10.2 255.255.255.0
 standby 10 ip 192.168.10.1
 standby 10 priority 110
 standby 10 preempt
!
interface Vlan20
 ip address 192.168.20.2 255.255.255.0
 standby 20 ip 192.168.20.1
 standby 20 priority 110
 standby 20 preempt
!
no ip http server
no ip http secure-server
!
ip forward-protocol nd
!
!
!

R2如下：

R2#sh run
R2#sh running-config
Building configuration...

Current configuration : 1441 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R2
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
memory-size iomem 5
!
!
ip cef
no ip domain lookup
!
!
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface FastEthernet0/0
 no ip address
 shutdown
 duplex auto
 speed auto
!
interface FastEthernet1/0
 switchport access vlan 10
!
interface FastEthernet1/1
 switchport access vlan 20
!
interface FastEthernet1/2
!
interface FastEthernet1/3
!
interface FastEthernet1/4
!
interface FastEthernet1/5
!
interface FastEthernet1/6
!
interface FastEthernet1/7
!        
interface FastEthernet1/8
!
interface FastEthernet1/9
!
interface FastEthernet1/10
!
interface FastEthernet1/11
!
interface FastEthernet1/12
!
interface FastEthernet1/13
!
interface FastEthernet1/14
!
interface FastEthernet1/15
!
interface Vlan1
 no ip address
!
interface Vlan10
 ip address 192.168.10.3 255.255.255.0
 standby 10 ip 192.168.10.1
 standby 10 priority 120
 standby 10 preempt
!
interface Vlan20
 ip address 192.168.20.3 255.255.255.0
 standby 20 ip 192.168.20.1
 standby 20 priority 120
 standby 20 preempt
!
no ip http server
no ip http secure-server
!
ip forward-protocol nd
!
!
!
!
!
control-plane

 

各種show

R1#sh ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route

Gateway of last resort is not set

C    192.168.10.0/24 is directly connected, Vlan10
C    192.168.20.0/24 is directly connected, Vlan20

R1#sh standby brief
                     P indicates configured to preempt.
                     |
Interface   Grp Prio P State    Active          Standby         Virtual IP    
Vl10        10  110  P Standby  192.168.10.3    local           192.168.10.1  
Vl20        20  110  P Active   local           unknown         192.168.20.1 

 

R2#sh ip ro
R2#sh ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route

Gateway of last resort is not set

C    192.168.10.0/24 is directly connected, Vlan10      ------------不知道問什麼沒有vlan20的

R2#sh standby brief
                     P indicates configured to preempt.
                     |
Interface   Grp Prio P State    Active          Standby         Virtual IP    
Vl10        10  120  P Active   local           192.168.10.2    192.168.10.1  
Vl20        20  120  P Init     unknown         unknown         192.168.20.1  

R2#sh interfaces fastEthernet 1/1
FastEthernet1/1 is up, line protocol is down     ---------------------這裏不應該是DOWN的
  Hardware is Fast Ethernet, address is cc01.0cb0.f101 (bia cc01.0cb0.f101)
  MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec,
     reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA, loopback not set
  Keepalive set (10 sec)
  Auto-duplex, Auto-speed
  ARP type: ARPA, ARP Timeout 04:00:00
  Last input 00:00:01, output never, output hang never
  Last clearing of "show interface" counters never
  Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
  Queueing strategy: fifo
  Output queue: 0/40 (size/max)
  5 minute input rate 0 bits/sec, 0 packets/sec
  5 minute output rate 0 bits/sec, 0 packets/sec
     0 packets input, 0 bytes, 0 no buffer
     Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
     0 input packets with dribble condition detected
     0 packets output, 0 bytes, 0 underruns
     0 output errors, 0 collisions, 2 interface resets

 

 

 

 

 

 

 

高手  求解？