在配置HSRP的時候，vlan不自動成爲 Active 狀態，一直處於init狀態，還好當時東哥幫我解決。。。。
難到只有在vlan數據庫裏面no掉vlan後重新創建vlan才能成爲active狀態嗎
Interface Grp Prio P State Active Standby Virtual IP
Vl10 10 120 P Init unknown unknown 172.1.10.254
Vl20 20 100 Init unknown unknown unknown
Vl30 30 120 P Init unknown unknown 172.1.30.254
Vl40 40 100 Init unknown unknown unknown
SW1(config)#end
SW1#vlan
*Mar 1 00:15:36.519: %SYS-5-CONFIG_I: Configured from console by console
SW1#vlan d
SW1(vlan)#no vlan 10
VLAN 10 does not exist
SW1(vlan)#exit
SW1#vlan d
SW1(vlan)#vlan 10
VLAN 10 added:
Name: VLAN0010
SW1(vlan)#exit
APPLY completed.
Exiting....
SW1#show standby brief
P indicates configured to preempt.
|
Interface Grp Prio P State Active Standby Virtual IP
Vl10 10 120 P Speak unknown unknown 172.1.10.254
Vl20 20 100 Init unknown unknown unknown
Vl30 30 120 P Init unknown unknown 172.1.30.254
Vl40 40 100 Init unknown unknown unknown
SW1#
*Mar 1 00:16:27.339: %HSRP-5-STATECHANGE: Vlan10 Grp 10 state Speak -> Standby
*Mar 1 00:16:27.839: %HSRP-5-STATECHANGE: Vlan10 Grp 10 state Standby -> Active
SW1#show standby brief
P indicates configured to preempt.
|
Interface Grp Prio P State Active Standby Virtual IP
Vl10 10 120 P Active local unknown 172.1.10.254
Vl20 20 100 Init unknown unknown unknown
Vl30 30 120 P Init unknown unknown 172.1.30.254
Vl40 40 100 Init unknown unknown unknown
SW1#