r1# ping Protocol [ip]: Target IP address: 2.2.2.2 Repeat count [5]: Datagram size [100]: Timeout in seconds [2]: Extended commands [n]: y Source address or interface: 1.1.1.1 Type of service [0]: Set DF bit in IP header? [no]: Validate reply data? [no]: Data pattern [0xABCD]: Loose, Strict, Record, Timestamp, Verbose[none]: r Number of hops [ 9 ]: Loose, Strict, Record, Timestamp, Verbose[RV]: Sweep range of sizes [n]: Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 2.2.2.2, timeout is 2 seconds: Packet sent with a source address of 1.1.1.1 Packet has IP options: Total option bytes= 39, padded length=40 Record route: <*> (0.0.0.0) (0.0.0.0) (0.0.0.0) (0.0.0.0) (0.0.0.0) (0.0.0.0) (0.0.0.0) (0.0.0.0) (0.0.0.0) Reply to request 0 (52 ms). Received packet has options Total option bytes= 40, padded length=40 Record route: (198.98.2.1) (2.2.2.2) (198.98.3.2) (1.1.1.1) <*> (0.0.0.0) (0.0.0.0) (0.0.0.0) (0.0.0.0) (0.0.0.0) End of list Reply to request 1 (8 ms). Received packet has options Total option bytes= 40, padded length=40 Record route: (198.98.3.1) (2.2.2.2) (198.98.1.2) (1.1.1.1) <*> (0.0.0.0) (0.0.0.0) (0.0.0.0) (0.0.0.0) (0.0.0.0) End of list Reply to request 2 (8 ms). Received packet has options Total option bytes= 40, padded length=40 Record route: (198.98.1.1) (2.2.2.2) (198.98.2.2) (1.1.1.1) <*> (0.0.0.0) (0.0.0.0) (0.0.0.0) (0.0.0.0) (0.0.0.0) End of list Reply to request 3 (4 ms). Received packet has options Total option bytes= 40, padded length=40 Record route: (198.98.2.1) (2.2.2.2) (198.98.3.2) (1.1.1.1) <*> (0.0.0.0) (0.0.0.0) (0.0.0.0) (0.0.0.0) (0.0.0.0) End of list Reply to request 4 (24 ms). Received packet has options Total option bytes= 40, padded length=40 Record route: (198.98.3.1) (2.2.2.2) (198.98.1.2) (1.1.1.1) <*> (0.0.0.0) (0.0.0.0) (0.0.0.0) (0.0.0.0) (0.0.0.0) End of list Success rate is 100 percent (5/5), round-trip min/avg/max = 4/19/52 ms |
一條物理鏈路劃分信道(2)
發表評論
所有評論
還沒有人評論,想成為第一個評論的人麼? 請在上方評論欄輸入並且點擊發布.