LVS+keepalived高可用羣集

原創 lc251156121 2019-02-22 18:20

簡介

Keepalived起初是專門針對LVS設計的一款強大的輔助工具，主要是用來提供故障切換和健康檢查功能——判斷LVS負載調度器、節點服務器的可用性，及時隔離並替換爲新的服務器，當故障主機回覆後將其重新加入羣集

實驗環境

主機 操作系統 IP地址
DR1主調度服務器 CentOS 7.0 x86_64 192.168.100.156
DR2備調度服務器 CentOS 7.0 x86_64 192.168.100.157
web1節點服務器 CentOS 7.0 x86_64 192.168.100.133
web2節點服務器 CentOS 7.0 x86_64 192.168.100.134
VIP虛擬IP地址 -------- 192.168.100.10
Win 7 客戶端 Windows 7 192.168.100.50

開始部署

DR1主調度服務器

1.安裝keepalived、ipvsadm軟件包
  yum install keepalived ipvsadm -y
2.修改/proc響應參數
  vi /etc/sysctl.conf
net.ipv4.ip_forward=1                                    #開啓路由轉發功能
net.ipv4.conf.all.send_redirects = 0              #proc響應關閉重定向功能
net.ipv4.conf.default.send_redirects = 0
net.ipv4.conf.ens33.send_redirects = 0

3.立即生效
  sysctl -p
4.創建虛擬VIP
    cd /etc/sysconfig/network-scripts/
    cp ifcfg-ens33 ifcfg-ens33:0
5.編輯虛擬網卡    
  vim ifcfg-ens33:0
DEVICE=ens33:0
ONBOOT=yes
IPADDR=192.168.100.10
NETMASK=255.255.255.0
6.啓用虛擬網卡
ifup ifcfg-ens33:0
7.製作dr.sh腳本文件
  vim /etc/init.d/dr.sh
#!/bin/bash
GW=192.168.100.1                          #網關地址
VIP=192.168.100.10                        #VIP虛擬地址
RIP1=192.168.100.133                   #web1節點服務器IP
RIP2=192.168.100.134                  #web2節點服務器IP
case "$1" in
start)
/sbin/ipvsadm --save > /etc/sysconfig/ipvsadm       #保存ipvsadm策略
systemctl start ipvsadm 
/sbin/ifconfig ens33:0 $VIP broadcast $VIP netmask 255.255.255.255 broadcast $VIP up
/sbin/route add -host $VIP dev ens33:0
/sbin/ipvsadm -A -t $VIP:80 -s rr
/sbin/ipvsadm -a -t $VIP:80 -r $RIP1:80 -g
/sbin/ipvsadm -a -t $VIP:80 -r $RIP2:80 -g
echo "ipvsadm starting --------------------[ok]"
;;
stop)
/sbin/ipvsadm -C
systemctl stop ipvsadm
ifconfig ens33:0 down
route del $VIP
echo "ipvsamd stoped----------------------[ok]"
;;
status)
if [ ! -e /var/lock/subsys/ipvsadm ];then
echo "ipvsadm stoped---------------"
exit 1
else
echo "ipvsamd Runing ---------[ok]"
fi
;;
*)
echo "Usage: $0 {start|stop|status}"
exit 1
esac
exit 0
8.給dr.sh腳本賦執行權限,啓動腳本
chmod +x dr.sh
service dr.sh start
9.查看驗證lvs節點狀態
  ipvsadm -ln
10.修改keepalived配置文件如下
vim /etc/keepalived/keepalived.conf

global_defs {
...
smtp_server 127.0.0.1                             #指向本地
router_id LVS_02                                     #指定服務器名稱
... 
}
vrrp_instance VI_1 {
state BACKUP                                       #主份服務器是Master
interface ens33
virtual_router_id 10                                   #主備組號相同
priority 99                                                 #優先級備服務器小於主服務器
... 
auth_pass abc123                                 #驗證密碼，主備相同
...
virtual_ipaddress {
192.168.100.10                                      #虛擬VIP地址
}
...
virtual_server 192.168.100.10 80 {         #虛擬服務器VIP、端口
...
lb_kind DR
...
real_server 192.168.100.133 80 {           #真實web1節點服務器IP、端口
weight 1
TCP_CHECK {
connect_port 80 
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
} 
} 
real_server 192.168.100.134 80 { #真實web2節點服務器IP、端口
weight 1
TCP_CHECK {
connect_port 80
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
} 
} 
}

11.啓動keepalived服務
 systemctl start keepalived

DR2從調度服務器

1.安裝keepalived、ipvsadm軟件包
  yum install keepalived ipvsadm -y
2.修改/proc響應參數
  vi /etc/sysctl.conf
net.ipv4.ip_forward=1                                    #開啓路由轉發功能
net.ipv4.conf.all.send_redirects = 0              #proc響應關閉重定向功能
net.ipv4.conf.default.send_redirects = 0
net.ipv4.conf.ens33.send_redirects = 0

3.立即生效
  sysctl -p
4.製作dr.sh腳本文件
  vim /etc/init.d/dr.sh
#!/bin/bash
GW=192.168.100.1                          #網關地址
VIP=192.168.100.10                        #VIP虛擬地址
RIP1=192.168.100.133                   #web1節點服務器IP
RIP2=192.168.100.134                  #web2節點服務器IP
case "$1" in
start)
/sbin/ipvsadm --save > /etc/sysconfig/ipvsadm       #保存ipvsadm策略
systemctl start ipvsadm 
/sbin/ifconfig ens33:0 $VIP broadcast $VIP netmask 255.255.255.255 broadcast $VIP up
/sbin/route add -host $VIP dev ens33:0
/sbin/ipvsadm -A -t $VIP:80 -s rr
/sbin/ipvsadm -a -t $VIP:80 -r $RIP1:80 -g
/sbin/ipvsadm -a -t $VIP:80 -r $RIP2:80 -g
echo "ipvsadm starting --------------------[ok]"
;;
stop)
/sbin/ipvsadm -C
systemctl stop ipvsadm
ifconfig ens33:0 down
route del $VIP
echo "ipvsamd stoped----------------------[ok]"
;;
status)
if [ ! -e /var/lock/subsys/ipvsadm ];then
echo "ipvsadm stoped---------------"
exit 1
else
echo "ipvsamd Runing ---------[ok]"
fi
;;
*)
echo "Usage: $0 {start|stop|status}"
exit 1
esac
exit 0
5.給dr.sh腳本賦執行權限,啓動腳本
chmod +x dr.sh
service dr.sh start
6.查看驗證lvs節點狀態
  ipvsadm -ln
7.修改keepalived配置文件如下
vim /etc/keepalived/keepalived.conf

global_defs {
...
smtp_server 127.0.0.1                             #指向本地
router_id LVS_02                                     #指定服務器名稱
... 
}
vrrp_instance VI_1 {
state MASTER                                        #備份服務器是BACKUP
interface ens33
virtual_router_id 10                                   #主備組號相同
priority 100                                              #優先級備服務器小於主服務器
... 
auth_pass abc123                                 #驗證密碼，主備相同
...
virtual_ipaddress {
192.168.100.10                                      #虛擬VIP地址
}
...
virtual_server 192.168.100.10 80 {         #虛擬服務器VIP、端口
...
lb_kind DR
...
real_server 192.168.100.133 80 {           #真實web1節點服務器IP、端口
weight 1
TCP_CHECK {
connect_port 80 
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
} 
} 
real_server 192.168.100.134 80 { #真實web2節點服務器IP、端口
weight 1
TCP_CHECK {
connect_port 80
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
} 
} 
}

8.啓動keepalived服務
 systemctl start keepalived

Web1節點服務器

1.安裝httpd軟件包
yum install -y httpd
2.啓動httpd服務
systemctl start httpd.service 
3.新建網站首頁文件
echo "<h1>this is benet</h1>" > /var/www/html/index.html
4.新建web.sh腳本至服務管理目錄，便於service進行管理
vim /etc/init.d/web.sh
#!/bin/bash
VIP=192.168.100.10 #VIP虛擬IP地址
case "$1" in
start)
ifconfig lo:0 $VIP netmask 255.255.255.255 broadcast $VIP
/sbin/route add -host $VIP dev lo:0
echo "1" >/proc/sys/net/ipv4/conf/lo/arp_ignore
echo "2" >/proc/sys/net/ipv4/conf/lo/arp_announce
echo "1" >/proc/sys/net/ipv4/conf/all/arp_ignore
echo "2" >/proc/sys/net/ipv4/conf/all/arp_announce
sysctl -p >/dev/null 2>&1
echo "RealServer Start OK "
;;
stop)
ifconfig lo:0 down
route del $VIP /dev/null 2>&1
echo "0" >/proc/sys/net/ipv4/conf/lo/arp_ignore
echo "0" >/proc/sys/net/ipv4/conf/lo/arp_announce
echo "0" >/proc/sys/net/ipv4/conf/all/arp_ignore
echo "0" >/proc/sys/net/ipv4/conf/all/arp_announce
echo "RealServer Stopd"
;;
*)
echo "Usage: $0 {start|stop}"
exit 1
esac
exit 0

5.給web.sh腳本賦執行權限
chmod +x web.sh
6.啓動web.sh服務
service web.sh start
7.關閉防火牆及selinux
systemctl stop  firewalld.service 
setenforce 0

8.測試
LVS+keepalived高可用羣集

Web2節點服務器

1.安裝httpd軟件包
yum install -y httpd
2.啓動httpd服務
systemctl start httpd.service 
3.新建網站首頁文件
echo "<h1>this is accp web</h1>" > /var/www/html/index.html
4.新建web.sh腳本至服務管理目錄，便於service進行管理
vim /etc/init.d/web.sh
#!/bin/bash
VIP=192.168.100.10 #VIP虛擬IP地址
case "$1" in
start)
ifconfig lo:0 $VIP netmask 255.255.255.255 broadcast $VIP
/sbin/route add -host $VIP dev lo:0
echo "1" >/proc/sys/net/ipv4/conf/lo/arp_ignore
echo "2" >/proc/sys/net/ipv4/conf/lo/arp_announce
echo "1" >/proc/sys/net/ipv4/conf/all/arp_ignore
echo "2" >/proc/sys/net/ipv4/conf/all/arp_announce
sysctl -p >/dev/null 2>&1
echo "RealServer Start OK "
;;
stop)
ifconfig lo:0 down
route del $VIP /dev/null 2>&1
echo "0" >/proc/sys/net/ipv4/conf/lo/arp_ignore
echo "0" >/proc/sys/net/ipv4/conf/lo/arp_announce
echo "0" >/proc/sys/net/ipv4/conf/all/arp_ignore
echo "0" >/proc/sys/net/ipv4/conf/all/arp_announce
echo "RealServer Stopd"
;;
*)
echo "Usage: $0 {start|stop}"
exit 1
esac
exit 0

5.給web.sh腳本賦執行權限
chmod +x web.sh
6.啓動web.sh服務
service web.sh start
7.關閉防火牆及selinux
systemctl stop  firewalld.service 
setenforce 0

8.測試
LVS+keepalived高可用羣集

客戶端測試

LVS+keepalived高可用羣集
LVS+keepalived高可用羣集
等待幾十秒後刷新，如果不行，清除瀏覽器緩存後再試
LVS+keepalived高可用羣集

發表評論
所有評論
還沒有人評論，想成為第一個評論的人麼? 請在上方評論欄輸入並且點擊發布.
相關文章

LVS+Keepalived DR模式實現web負載均衡高可用

jack_keyang 2019-02-23 13:21:33

（十六）企業部分之lvs

wjl19940429 2019-02-23 00:12:33

LVS集羣部署詳細過程（LVS+OSPF）

vfast_wuwei 2019-02-23 12:55:06

LVS在大流量下基於OSPF的負載均衡實施方案

vfast_wuwei 2019-02-23 12:55:03

2018-4-11 16周1次課 LVS DR模式搭建、keepalived + LVS

alexis7gunner 2019-02-23 00:41:20

Keepalived

小小小平凡 2019-02-23 00:39:36

keepalived實現lvs高可用並負載均衡lamp

xsllqs 2019-02-23 00:38:49

lvs

Vincent一馬 2019-02-23 00:34:22

LVS 負載均衡原理及安裝配置簡明指南

高薪愛好者 2019-02-23 00:09:06

keepalived基礎及使用DR模型構建一個real_server

shang61511 2019-02-23 14:04:46

nginx+keepalived配置高可用HTTP羣集

小紅帽子 2019-02-23 13:37:48

2018-4-9 15周4次課 用keepalived配置高可用集羣

alexis7gunner 2019-02-23 00:41:20

keepalived

Vincent一馬 2019-02-23 00:34:22

詳解keepalived配置和使用

時光的印記 2019-02-23 00:18:22

keepalived

康熙爺 2019-02-22 23:57:15