登陸網址下載相應版本的Open××× Access Server:
http://open***.net/index.php/access-server/download-open***-as.html
wget http://swupdate.open***.org/as/open***-as-1.8.3-CentOS5.i386.rpm
安裝:
rpm -ivh open***-as-1.8.3-CentOS5.i386.rpm
運行:
/usr/local/open***_as/bin/o***-init
[root@localhost ~]# /usr/local/open***_as/bin/o***-init
Detected an existing Open×××-AS configuration.
Continuing will delete this configuration and restart from scratch.
Please enter 'DELETE' to delete existing configuration:
Open×××-AS configuration has not been modified.
[root@localhost ~]# /usr/local/open***_as/bin/o***-init
Detected an existing Open×××-AS configuration.
Continuing will delete this configuration and restart from scratch.
Please enter 'DELETE' to delete existing configuration: DELETE
Stopping open***as daemon...
Open××× Access Server
Initial Configuration Tool
------------------------------------------------------
Open××× Access Server End User License Agreement (Open×××-AS EULA)
1. Copyright Notice: Open××× Access Server License;
Copyright (c) 2009-2011 Open××× Technologies, Inc.. All rights reserved.
"Open×××" is a trademark of Open××× Technologies, Inc.
2. Redistribution of Open××× Access Server binary forms and documents,
are permitted provided that redistributions of Open××× Access Server
binary forms and documents must reproduce the above copyright notice.
3. You agree not to reverse engineer, decompile, disassemble, modify, translate,
make any attempt to discover the source code of this software, or create
derivative works from this software.
4. The Open××× Access Server is bundled with other open source software
components, some of which fall under different licenses. By using
Open××× or any of the bundled components, you agree to be bound by
the conditions of the license for each respective component.
See /usr/local/open***_as/license.txt in the Access Server distribution
for more info.
5. THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
OPEN××× TECHNOLOGIES, INC BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Please enter 'yes' to indicate your agreement [no]: yes
Once you provide a few initial configuration settings,
Open××× Access Server can be configured by accessing
its Admin Web UI using your Web browser.
Will this be the primary Access Server node?
(enter 'no' to configure as a backup or standby node)
> Press ENTER for default [yes]:
Please specify the network interface and IP address to be
used by the Admin Web UI:
(1) all interfaces: 0.0.0.0
(2) eth0: 10.0.2.15
(3) eth1: 192.168.56.150
Please enter the option number from the list above (1-3).
> Press Enter for default [2]: 3
Please specify the port number for the Admin Web UI.
> Press ENTER for default [943]:
Please specify the TCP port number for the Open××× Daemon
> Press ENTER for default [443]:
Should client traffic be routed by default through the ×××?
> Press ENTER for default [yes]:
Should client DNS traffic be routed by default through the ×××?
> Press ENTER for default [yes]:
Use local authentication via internal DB?
> Press ENTER for default [no]:
Private subnets detected: ['10.0.2.0/24', '192.168.56.0/24']
Should private subnets be accessible to clients by default?
> Press ENTER for default [yes]:
To initially login to the Admin Web UI, you must use a
username and password that successfully authenticates you
with the host UNIX system (you can later modify the settings
so that RADIUS or LDAP is used for authentication instead).
You can login to the Admin Web UI as "open***" or specify
a different user account to use for this purpose.
Do you wish to login to the Admin UI as "open***"?
> Press ENTER for default [yes]:
> Please specify your Open×××-AS license key (or leave blank to specify later):
Initializing Open×××...
Adding new user login...
useradd -s /sbin/nologin "open***"
Writing as configuration file...
Perform sa init...
Wiping any previous userdb...
Creating default profile...
Modifying default profile...
Adding new user to userdb...
Modifying new user as superuser in userdb...
Getting hostname...
Hostname: localhost.localdomain
Preparing web certificates...
Getting web user account...
Adding web group account...
Adding web group...
Adjusting license directory ownership...
Initializing confdb...
Generating init scripts...
Generating PAM config...
Generating init scripts auto command...
Starting open***as...
NOTE: Your system clock must be correct for Open××× Access Server
to perform correctly. Please ensure that your time and date
are correct on this system.
Initial Configuration Complete!
You can now continue configuring Open××× Access Server by
directing your Web browser to this URL:
https://192.168.56.150:943/admin
Login as "open***" with the same password used to authenticate
to this UNIX host.
During normal operation, Open××× AS can be accessed via these URLs:
Admin UI: https://192.168.56.150:943/admin
Client UI: https://192.168.56.150:943/
See the Release Notes for this release at:
http://www.open***.net/access-server/rn/open***_as_1_8_3.html
設置登錄***用戶的密碼:
passwd open***
登錄管理界面:
https://192.168.56.150:943/admin