LCD1602液晶屏的FPGA驅動（1）————讀，寫模塊

說明書摘要

LCD1602的讀寫時序很容易，只需在對應的時刻對RS，RW，E操作即可，DB數據總線保持對應的時間或在對應時間讀取。

Verilog代碼

LCD寫模塊

//Name:Lcd_read_mod
//Author:Yang_Cheng_Yu
//Date:2020/4/18
//==================defines=====================
`define SIM
/*

*/
module	lcd_write(
	//================System Signal================
	input					clk,
	input					rst_n,
	//================Interface====================
	input					rs_in,
	output 	reg 			RS,//指令數據選擇
	output 	reg 			RW,
	output  reg 			E,
	output  reg[7:0]		DB,
	input					wr_req,
	input[7:0]				data
);
	//================parameters===================
	`ifndef SIM

	`else
	
	`endif
	//================System regs==================
	reg 					wr_req_t0;
	reg 					wr_req_t1;
	wire 					trig_wr_req;
	reg 					flag_wr;
	reg  					flag_wr_end;
	reg[9:0]				cnt;
	//================Main Codes===================
	//wr_req
	always	@(posedge clk)begin
		wr_req_t0 <= wr_req;
		wr_req_t1 <= wr_req_t0;
	end
	assign trig_wr_req = wr_req_t0&(~wr_req_t1);
	//	output 	reg 			RS,//指令數據選擇
	always	@(posedge clk or negedge rst_n)begin
		if(rst_n==1'b0)
			RS <= 1'b1;
		else if(flag_wr==1'b0&&trig_wr_req==1'b1)
			RS <= rs_in;
		else if(cnt==7+25+10)
			RS <= 1'b1;
	end
	
	//output 	reg 			RW,
	always	@(posedge clk or negedge rst_n)begin
		if(rst_n==1'b0)
			RW <= 1'b1;
		else if(flag_wr==1'b0&&trig_wr_req==1'b1)
			RW <= 1'b0;
		else if(cnt==7+25+10)
			RW <= 1'b1;
	end
	
	//E
	always	@(posedge clk or negedge rst_n)begin
		if(rst_n==1'b0)
			E <= 1'b0;
		else if(cnt==7)
			E <= 1'b1;
		else if(cnt==7+25)
			E <= 1'b0;
	end
	
	//DB
	always	@(posedge clk or negedge rst_n)begin
		if(rst_n==1'b0)
			DB <= 'd0;
		else if(flag_wr==1'b1&&cnt==7)
			DB <= data;
		else if(cnt==7+25+10)
			DB <= 'd0;
	end
	
	//flag_wr
	always	@(posedge clk or negedge rst_n)begin
		if(rst_n==1'b0)
			flag_wr <= 1'b0;
		else if(flag_wr==1'b0&&trig_wr_req==1'b1)
			flag_wr <= 1'b1;
		else if(cnt==7+25+10)
			flag_wr <= 1'b0;
	end
	
	//flag_wr_end
	always	@(posedge clk or negedge rst_n)begin
		if(rst_n==1'b0)
			flag_wr_end <= 1'b0;
		else if(cnt==7+25+10)
			flag_wr_end <= 1'b1;
		else
			flag_wr_end <= 1'b0;
	end
	//cnt
	always	@(posedge clk or negedge rst_n)begin
		if(rst_n==1'b0)
			cnt <= 'd0;
		else if(flag_wr==1'b1&&cnt==7+25+10)
			cnt <= 'd0;
		else if(flag_wr==1'b1)
			cnt	<= cnt + 1'b1;
		else
			cnt <= 'd0;
	end
	
endmodule

LCD讀模塊

//Name:Lcd_read_mod
//Author:Yang_Cheng_Yu
//Date:2020/4/18
//==================defines=====================
`define SIM
/*

*/
module	lcd_read(
	//================System Signal================
	input					clk,
	input					rst_n,
	//================Interface====================
	output 	reg 			RS,//指令數據選擇
	output 	reg 			RW,
	output  reg 			E,
	input [7:0]				DB,
	output reg[7:0]			data_rd,
	output reg				flag_rd_end,
	input					rd_req,
	input					rs_in
);
	//================parameters===================
	`ifndef SIM
	
	`else
	
	`endif
	//================System regs==================
	reg 					flag_rd;
	reg 					rd_req_t0;
	reg 					rd_req_t1;
	wire 					trig_rd_req;
	reg[15:0]				cnt;
	//================Main Codes===================
	//rd_req
	always	@(posedge clk)begin
		rd_req_t0 <= rd_req;
		rd_req_t1 <= rd_req_t0;
	end
	assign trig_rd_req = rd_req_t0&(~rd_req_t1);

	//RS
	always	@(posedge clk or negedge rst_n)begin
		if(rst_n==1'b0)
			RS <= 1'b1;
		else if(flag_rd==1'b0&&trig_rd_req==1'b1)
			RS <= rs_in;
		else if(flag_rd==1'b1&&cnt==7+25+10)
			RS <= 1'b1;
	end
	
	//flag_rd
	always	@(posedge clk or negedge rst_n)begin
		if(rst_n==1'b0)
			flag_rd <= 1'b0;
		else if(flag_rd==1'b0&&trig_rd_req==1'b1)
			flag_rd <= 1'b1;
		else if(flag_rd==1'b1&&cnt==7+25+10)
			flag_rd <= 1'b0;
	end
	
	//RW
	always	@(posedge clk or negedge rst_n)begin
		if(rst_n==1'b0)
			RW <= 1'b0;
		else if(flag_rd==1'b0&&trig_rd_req==1'b1)
			RW <= 1'b1;
		else if(flag_rd==1'b1&&cnt==7+25+10)
			RW <= 1'b0;
	end
	//data_rd
	always	@(posedge clk or negedge rst_n)begin
		if(rst_n==1'b0)
			data_rd <= 'd0;
		else if(flag_rd==1'b1&&cnt==7+14)
			data_rd <= DB;
	end
	//flag_rd_end
	always	@(posedge clk or negedge rst_n)begin
		if(rst_n==1'b0)
			flag_rd_end <= 1'b0;
		else if(flag_rd==1'b1&&cnt==7+25+10)
			flag_rd_end <= 1'b1;
		else
			flag_rd_end <= 1'b0;
	end
	//cnt
	always	@(posedge clk or negedge rst_n)begin
		if(rst_n==1'b0)
			cnt <= 'd0;
		else if(flag_rd==1'b1)
			if(cnt==7+25+10)
				cnt <= 'd0;
			else
				cnt <= cnt + 1'b1;
		else
			cnt <= 'd0;
	end
	//E
	always	@(posedge clk or negedge rst_n)begin
		if(rst_n==1'b0)
			E <= 1'b0;
		else if(flag_rd==1'b1&&cnt==7)
			E <= 1'b1;
		else if(flag_rd==1'b1&&cnt==7+25)
			E <= 1'b0;
	end	
endmodule