#include<reg51.h>
typedef unsigned char uchar;
typedef unsigned int uint;
sbit E1=P3^4;
sbit ST=P3^5;
sbit SS=P3^6;
unsigned char code mo[6][2][16]=
{{{0x00,0x00,0x01,0x02,0x12,0x13,0x1E,0xF2,0x23,0x24,0x24,0x04,0x07,0x00,0x00,0x00},
{0x00,0x00,0xF8,0x00,0x50,0x50,0xD0,0x78,0xA0,0xA0,0x08,0x04,0xFC,0x00,0x00,0x00}},
{{0x00,0x00,0x00,0x00,0x78,0x54,0x54,0x55,0x95,0x85,0x99,0xE1,0x01,0x00,0x00,0x00},
{0x00,0x00,0x00,0xF0,0xA8,0xA8,0xA8,0x28,0x48,0x48,0x04,0x0E,0xF0,0x00,0x00,0x00}},
{{0x00,0x00,0x0F,0x15,0xF1,0x1F,0x00,0x00,0x09,0x89,0x4A,0x13,0x10,0x10,0x00,0x00},
{0x84,0x88,0xF0,0x40,0x08,0xFC,0x00,0x08,0xF0,0x00,0x00,0xF0,0x08,0x08,0x38,0x00}},
{{0x00,0x04,0x18,0x10,0x11,0x16,0x90,0x50,0x10,0x24,0x22,0x20,0x28,0x10,0x00,0x00},
{0x00,0x04,0x04,0x84,0x04,0x44,0x44,0x78,0x88,0x88,0x88,0x08,0x0C,0x04,0x00,0x00}},
{{0x00,0x00,0x02,0x02,0x02,0x02,0xFF,0x04,0x04,0x04,0x04,0x04,0x00,0x00,0x00,0x00},
{0x00,0x04,0x08,0x10,0x20,0xC0,0x00,0x80,0x40,0x20,
單片機應用系統設計技術——超大屏幕點陣顯示
發表評論
所有評論
還沒有人評論，想成為第一個評論的人麼? 請在上方評論欄輸入並且點擊發布.
相關文章
stc isp 燒錄接線
1.接線 下載器 單片機 5v 端 VCC 端 3.3v 備用 GND GND TXD RXD RXD TXD 注意，TXD 、RXD 是反接。生成好.hex文件之後，先點下載，再上電。
MCU初始化流程——從上電到main()之間
說明： 以下介紹示例的MCU地址空間如下： ROM空間爲：0x0000 0000 – 0x0000 8000 RAM空間爲：0x2000 0000 – 0x2000 2000