CC2530 zigbee IAR8.10.1環境搭建

本文主要內容來至於NJGB科技,感謝NJGB科技。

1 IAR Embedded Workbench for 8051 8.10.1
安裝文件:“2014-8-1-NJZBcc2530\1.軟件工具\CD-EW8051-810”
Keygen:“2014-8-1-NJZBcc2530\1.軟件工具\IAR_KeyGen”
必須選擇版本8.10.1

2 安裝zigbee協議棧----zstack-251a
安裝文件:“2014-8-1-NJZBcc2530\1.軟件工具\ZStack-CC2530-2.5.1a”

3 安裝smartrf programmer軟件
.hex燒錄工具就在這個軟件裏,名字叫Flash Programmer

4 安裝驅動
4.1仿真器驅動的安裝
驅動目錄在:“...\IAR Systems\Embedded Workbench 6.0\8051\drivers\Texas Instruments”
名字:Chipcon SRF04EB (SmartRF04EB)

4.2安裝usb轉串口驅動
驅動目錄在:“2014-8-1-NJZBcc2530\1.軟件工具\HL-340 USB轉串口驅動”

USB-SERIAL CH340, Baudrate: 9600, no flow control

5 JLX12864
- 接口SPI
- 內部集成GRAM
- 12864表示分辨率是128 x 64,類似於Nokia5110,只是模塊額外集成了一個SPI接口的字庫

6 Abbreviation
CC2530: Chipcon,現已被TI收購
USB BH reset:Bigger Hammer or Brad Hosler,表示warm reset;you may be confused why the USB 3.0 spec calls the same type of reset "warm reset" in some places and "BH reset" in other places. "BH" reset is supposed to stand for "Big Hammer" reset, but it also stands for "Brad Hosler". Brad died shortly after the USB 3.0 bus specification was started, and they decided to name the reset after him. The suggestion was made shortly before the spec was finalized, so the wording is a bit inconsistent.

發表評論
所有評論
還沒有人評論,想成為第一個評論的人麼? 請在上方評論欄輸入並且點擊發布.
相關文章