SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS OFF
GO
/****************************************************************
* *
* 系統 ：生產管理系統 *
* 功能 ：MRP計算 *
* *
* 時間 ：2005-10-10 *
* *
****************************************************************/
-- Exec Sp_RunningMRP '2005/11/16','20051130004','',0,''
ALTER PROCEDURE [dbo].[Sp_RunningMRP]
@StartDateTime DateTime,
@CalcuNO Varchar(15),
@Runer Varchar(20),
@Returnid Int output,
@ErrMsg Varchar(100) Output
As
Begin Transaction
Declare @MaxEndDate DateTime
Declare @Count Int
Declare @Year Int
Declare @Month Int
Declare @FirstDate Datetime
Set @Returnid = 0
Set @ErrMsg = ''
Select @Count = Count(*),@MaxEndDate = Max(EndDate)
From B_TimeCircle
If @Count = 0
Begin
Set @Returnid = 0
Set @ErrMsg = '沒有進行計劃展望維護！'
GoTo ExitLable
End
Select @Count = Count(*)
From B_TimeArea
If @Count = 0
Begin
Set @Returnid = 0
Set @ErrMsg = '沒有進行計劃週期維護！'
GoTo ExitLable
End
If Month(@Startdatetime) = 1
Begin
Set @Year = Year(@StartDateTime) - 1
Set @Month = 12
End
Else
Begin
Set @Year = Year(@StartDateTime)
Set @Month = Month(@StartDateTime) - 1
End
Select @FirstDate = Cast(Convert(Char(10), @Startdatetime, 121) As Datetime) - Day(@Startdatetime) + 1
--調入PO欠數 (#T1)
Select Itemno, Syspono,IsNull(Poqs,0)As Poqs,DelyDate
Into #TA1
From(
Select AA.*,BB.Delyqty,IsNull(AA.Qty,0) - IsNull(BB.Delyqty,0) As Poqs from
(Select m.Syspono,ItemNo,Sum(qty) As qty,
Case When D.DelyDate Is Null Then M.DelyDate Else D.DelyDate End As DelyDate
From ( Select Syspono, DelyDate From O_POMas
Where IsStopDely = 0 And IsPauseDely = 0
And IsDirectExport = 0 And MRPClosed = 0
And Issure = 1 And poDate <= @Startdatetime
Group By Syspono, DelyDate
) M
Inner Join O_PODet D On M.SysPoNo = D.SysPoNo
Where D.IsNeedDely = 1
Group By M.Syspono,ItemNo,D.DelyDate,M.DelyDate
) AA
Left join (Select D.Syspono,D.ItemNo,IsNull(Sum(qty),0) As delyqty
From O_DLMas M
Inner Join O_DLDet D On M.SysDelyNo = D.SysDelyNo
Group By D.Syspono,D.ItemNo
) BB On AA.Syspono = BB.Syspono and AA.ItemNo = BB.ItemNo
Where IsNull(AA.Qty,0) <> IsNull(BB.Delyqty,0)
) TT
Order by Itemno
Select itemno,Sum(IsNull(Poqs,0)) As Poqs ,DelyDate
Into #T1
From #TA1
Group By Itemno,DelyDate
Order by Itemno
----------------------------------------------------------------------------------------------------------------------
/*存倉數＝車間存數＋貨倉庫存數 */
-----------------------------------------------------------------------------------------------------------------------------
--車間存數 (#T3)
Select Partno Into #A1
From VB_Purgoods
Where Len(Partno) > 1
Group By Partno
-- 注意﹕ 查詢O_AssReportMas,O_AssReportDet是裝配線上的數
Select Itemno ,Stockqty
Into #T3
From (
Select BB.*,C.itemno
From (
Select A.Bompartno,A.Stockqty
From O_AssReportMas B Inner Join O_AssReportDet A On A.sysNO = B.SysNO
Where B.[Date] = @StartDateTime
And A.Bompartno Not In (Select*From #A1)
) BB Inner Join VB_part C On C.partno = BB.bompartno
UniOn All
Select BB.*,C.itemno
From (
Select A.Bompartno,A.Stockqty
From O_AssReportMas B Inner Join O_AssReportDet A On A.sysNO = B.SysNO
Where B.[Date] = @StartDateTime And A.Bompartno In (Select*From #A1)
) BB Inner Join VB_Purgoods C On C.partno = BB.Bompartno
) CC Where Stockqty > 0
Group By Itemno ,Stockqty
Drop table #A1
------------------------------------------
--貨倉庫存數 (#T4) 注﹕其實當天的庫存已經載總數裏包括了
Select ItemNO,Sum(InStockQty) As InStockQty,Sum(OutStockQty) As OutStockQty,
Sum(CSQty) + Sum(InStockTQty) - Sum(OutStockTQty) As StockQty -- StockQty是負數系統暫當零考慮
Into #T4
From(
--庫存數量總數
Select D.ItemNO, InStockQty = 0, OutStockQty = 0,
InStockTQty = Case When B.IsRDFlag = '1' Then Sum(D.Qty) Else 0 End, --入庫總數
OutStockTQty = Case When B.IsRDFlag = '0' Then Sum(D.Qty) Else 0 End, CSQty = 0
From O_StockMas M Inner Join O_StockDet D On M.SysStockBillNO=D.SysStockBillNO
Inner Join B_StockRD_Type B On M.RDID = B.RDID Inner Join VB_Items S On S.ItemNO = D.ItemNO
Where M.StockDate >= @FirstDate And M.StockDate < @StartDateTime + 1
Group By B.IsRDFlag,M.RDID,D.ItemNO
UNION ALL
--清倉數
Select D.ItemNO, InStockQty = 0, OutStockQty = 0, InStockTQty = 0, OutStockTQty = 0,Sum(D.Qty) As CSQty
From O_CheckStockMas M Inner Join O_CheckStockDet D On M.SysCheckStockNo = D.SysCheckStockNo
Inner join VB_Items I ON D.ItemNO = I.ItemNO
Where M.[Year] = @Year AND M.[Month] = @Month Group By D.ItemNO ) As F
Group By ItemNO
-----------------------------------------------------------------------------------------------------------------------------
--毛需求=調入ForeCast總數+PO欠數(PO欠數﹐PO追加)
Select ItemNo,SumFCQty,DelyDate
Into #T5
From (
Select ItemNo,Poqs As SumFCQty,DelyDate
From #T1
Union All
Select d.itemno,Sum(IsNull(Qty,0)) As SumFCQty,D.NeedDate as DelyDate
From W_SalesForeCastMas M Inner Join W_SalesForeCastDet D On m.Sysbillno = d.Sysbillno
Where M.Issure = 1
And D.Havemrp = 1
And M.MRPClosed = 0
And D.MRPClose = 0
And D.NeedDate <= @MaxEndDate
Group By D.Itemno, D.NeedDate
)N Order by DelyDate
----------------------------------------------------------------------------------------------------------------------------
--調入生產BOM資料
Select M.Itemno As Fitemno, D.Itemno As CItemno,D.Qty,B.Source
Into #T6
From B_ItemBomMas M
Inner Join B_ItemBomDet D On M.Sysbillno = D.Sysbillno
Inner Join VB_Items B On B.Itemno = D.Itemno
Where M.Bomtype = 0 And M.Issure = 1
-----------------------------------------------------------------------------------------------------------------------------
--MRP計算開始
Declare @Itemno Varchar(30)
Declare @SumFCQty Decimal(20,5) -- 總數
Declare @BomDetItemno Varchar(30)
Declare @BomDetQty Decimal(20,5)
Declare @FCusPoqs Decimal(20,5)-- 客戶欠數 @CusPoqs Decimal(20,5),
Declare @VenPoqs Decimal(20,5),@FvenPoqs Decimal(20,5) -- 供應商欠數
Declare @PdQty Decimal(20,5),@FPDQty Decimal(20,5) -- 盤點數
Declare @CcQty Decimal(20,5),@FHCQty Decimal(20,5)-- 存倉數
Declare @FAllQty Decimal(20,5) -- 總數
Declare @CAllQty Decimal(20,5)
Declare @FLeadTime Int -- 父提前期
Declare @LeadTime Int -- 本節點提前期
Declare @Source Varchar(10)-- 料品來源
Declare @NeedDate DateTime
Declare @Foot Int
Declare @CNeedQty Decimal(20,5)
Declare @CcNeedQty Decimal(20,5)
Declare @CCount Int
Declare @FNQty Decimal(20,5) -- 父毛需求
Declare @CnQty Decimal(20,5) -- 子毛需求
Set @Foot=0
Declare Table_FC Cursor for Select itemno,SumFCQty,DelyDate From #T5
Open Table_FC
Fetch Next From Table_FC Into @Itemno,@SumFCQty,@NeedDate
While (@@Fetch_Status = 0)
Begin
--判斷在BOM表中是否存在
Select @Count = Count(*) From B_ItemBomMas Where Itemno = @Itemno And BomType = 0 And Issure = 1
If @Count = 0
Begin
Insert Into B_ItemNotBom(itemno,idkey,needDate) Values (@Itemno,1,@NeedDate)
Fetch Next From Table_FC Into @Itemno,@SumFCQty,@NeedDate
End
Else Begin
Set @FvenPoqs = 0
Set @FPDQty = 0
Set @FHcQty = 0
Set @FcusPoqs = 0
Set @FNQty = 0
-- 父提前期計算
Select @FLeadTime = Ceiling(IsNull(I.LeadTime,0)/Case When IsNull(A.aDate,0) = 0 Then 1 Else IsNull( A.aDate,0) End)
From VB_Items I,(Select Top 1 aDate From B_TimeArea)A Where ItemNo = @Itemno
--車間存數 --初始庫存
Select @FPDQty = IsNull(stockqty,0) From #T3 Where Itemno = @Itemno
--貨倉庫存 --初始庫存
Select @FHCQty = IsNull(StockQty,0) From #T4 Where ItemNO = @Itemno
-- 類別
Select @Source = Source From VB_Items Where ItemNo = @Itemno
--- 加入父節點﹐目的是在生成自制單時包含父節點
Select @FAllQty = IsNull(@SumFCQty,0) - IsNull(@FPDQty,0) - IsNull(@FHCQty,0)
Select @FNQty = IsNull(@SumFCQty,0)
Select @CCount = Count(*) From W_MRPResultDetail Where CalcuNo = @CalcuNo And CItemno = @Itemno-- And CNeedQty<>0
If @CCount = 0
Begin
Insert Into W_MRPResultDetail(CalcuNo,LeadTime,NeedDate,RunDate,FItemNO,FNeedQty,FPurPoqs,FCusPoqs,
FHCQty,FPDQty,CItemno,CNeedQty,CUnitQty,CPurPoqs,CCusPoqs,CHCQty,CPDQty,CSource,
IsRunOver,foot,FQty,CQty)
Values(@CalcuNo,@FLeadTime, @NeedDate,GetDate(),@Itemno,IsNull(@FAllQty,0),IsNull(@FvenPoqs,0),0,IsNull(@FHCQty,0),
IsNull(@FPDQty,0), @Itemno,IsNull(@FAllQty,0),1,IsNull(@FvenPoqs,0),IsNull(@FcusPoqs,0),
IsNull(@FHCQty,0),IsNull(@FPDQty,0),@Source,0,@Foot,IsNull(@FNQty,0),IsNull(@FNQty,0))
If @@Error <> 0
Begin
Set @Returnid = 0
Set @ErrMsg = '插入數據出錯﹐請與電腦部聯系！'
GoTo ExitLable
End
End
Else
Begin
Select Top 1 @CNeedQty = CNeedQty From W_MRPResultDetail
Where CalcuNo = @CalcuNo And CItemno = @Itemno
Order by RunDate Desc
Insert Into W_MRPResultDetail(CalcuNo,LeadTime,NeedDate,RunDate,FItemNO,FNeedQty,FPurPoqs,FCusPoqs,
FHCQty,FPDQty, CItemno,CNeedQty,CUnitQty,CPurPoqs,CCusPoqs,CHCQty,CPDQty,CSource,
IsRunOver,foot,FQty,CQty)
Select @CalcuNo,@FLeadTime, @NeedDate,GetDate(),@Itemno,
Case When @CNeedQty>=0 Then IsNull(@FNQty,0) Else @FNQty+@CNeedQty End,
IsNull(@FvenPoqs,0),IsNull(@FCusPoqs,0),IsNull(@FHCQty,0),IsNull(@FPDQty,0), @Itemno,
Case When @CNeedQty>=0 Then IsNull(@FNQty,0) Else @FNQty+@CNeedQty End,
@SumFCQty,IsNull(@FvenPoqs,0),IsNull(@FcusPoqs,0),
0,0,@Source,0,@Foot,IsNull(@FNQty,0),IsNull(@FNQty,0)
If @@Error <> 0
Begin
Set @Returnid = 0
Set @ErrMsg = '插入數據出錯﹐請與電腦部聯系！'
GoTo ExitLable
End
End
--展開下一層
Declare Table_BOM Cursor for Select Citemno,Qty,Source From #T6 Where Fitemno=@Itemno
Open Table_BOM
Fetch Next From Table_BOM Into @BOMDetItemno,@BomDetQty,@Source
While (@@Fetch_Status = 0)
Begin
Set @VenPoqs = 0
Set @PdQty = 0
Set @CcQty = 0
Set @CAllQty = 0
-- Set @CusPoqs = 0
Set @CnQty = 0
-- 本節點提前期
Select @LeadTime = @FLeadTime + Ceiling(IsNull(I.LeadTime,0)/Case When IsNull(A.aDate,0) = 0 Then 1 Else IsNull(A.aDate,0) End)
From VB_Items I,(Select Top 1 aDate From B_TimeArea)A Where ItemNo = @BOMDetItemno
--車間存數
Select @PdQty = IsNull(StockQty,0) From #T3 Where ItemNo = @BOMDetItemno
--貨倉庫存
Select @CcQty = IsNull(StockQty,0) From #T4 Where ItemNO = @BOMDetItemno
-- 類型
Select @Source = Source From VB_Items Where ItemNo = @BOMDetItemno
--計算總數
Select @CAllQty = (Case When @CCount <= 0 Then Case When @FAllQty > 0 Then @FAllQty Else 0 End
Else Case When @CNeedQty >= 0 Then IsNull(@FNQty,0)
Else IsNull(@FNQty,0) + IsNull(@CNeedQty,0) End End) * IsNull(@BomDetQty,0) - @PdQty - @CcQty
Select @CnQty = (Case When @CCount <= 0 Then Case When IsNull(@FAllQty,0) > 0 Then IsNull(@FAllQty,0)
Else 0 End Else Case When IsNull(@CNeedQty,0) >= 0 Then IsNull(@FNQty,0)
Else IsNull(@FNQty,0) + IsNull(@CNeedQty,0) End End) * IsNull(@BomDetQty,0)
--如果毛需求小於等於0﹐則不用考慮本節點需求
If @CnQty <= 0
Fetch Next From Table_BOM Into @BOMDetItemno,@BomDetQty,@Source
Else Begin
--單層展開
Select @Count = Count(*) From W_MRPResultDetail Where CalcuNo = @CalcuNo And CItemno = @BOMDetItemno --And CNeedQty<>0
If @Count = 0
Begin
Insert Into W_MRPResultDetail (CalcuNo,LeadTime,NeedDate,RunDate,FItemNO,FNeedQty,FPurPoqs,FCusPoqs,
FHCQty,FPDQty, CItemno,CNeedQty,CUnitQty,CPurPoqs,CCusPoqs,CHCQty,CPDQty,CSource,
IsRunOver,foot,FQty,CQty)
Values(@CalcuNo,@LeadTime,@NeedDate, GetDate(),@Itemno,(Case When @CCount <= 0 Then IsNull(@FAllQty,0)
Else Case When @CNeedQty >= 0 Then IsNull(@FNQty,0)
Else IsNull(@FNQty,0) + IsNull(@CNeedQty,0) End End),
IsNull(@FvenPoqs,0),0,IsNull(@FHCQty,0),
IsNull(@FPDQty,0), @BOMDetItemno,IsNull(@CAllQty,0),@BomDetQty,IsNull(@VenPoqs,0),0,
IsNull(@CcQty,0),IsNull(@PdQty,0),@Source,0,@Foot,IsNull(@FNQty,0),IsNull(@CnQty,0))
If @@ROWCount = 0
Begin
Set @Returnid = 0
Set @ErrMsg = 'MRP計算出錯，請與電腦部聯系！'
GoTo ExitLable
End
End
Else
Begin
Select Top 1 @CcNeedQty = IsNull(CNeedQty,0) From W_MRPResultDetail
Where CalcuNo = @CalcuNo And CItemno = @BOMDetItemno
Order by RunDate Desc
Insert Into W_MRPResultDetail (CalcuNo,LeadTime,NeedDate,RunDate,FItemNO,FNeedQty,FPurPoqs,FCusPoqs,
FHCQty,FPDQty,CItemno,CNeedQty,CUnitQty,CPurPoqs,CCusPoqs,CHCQty,CPDQty,CSource,
IsRunOver,foot,FQty,CQty)
Select @CalcuNo,@LeadTime,@NeedDate, GetDate(),@Itemno,(Case When @CCount <= 0 Then IsNull(@FAllQty,0)
Else Case When IsNull(@CNeedQty,0) >= 0 Then IsNull(@FNQty,0)
Else IsNull(@FNQty,0) + IsNull(@CNeedQty,0) End End),
IsNull(@FvenPoqs,0),0,IsNull(@FHCQty,0), IsNull(@FPDQty,0), @BOMDetItemno,
Case When IsNull(@CcNeedQty,0) >= 0 Then IsNull(@CnQty,0)
Else IsNull(@CnQty,0) + IsNull(@CcNeedQty,0) End ,
@BomDetQty,IsNull(@VenPoqs,0),0,0,0,@Source,0,@Foot,IsNull(@FNQty,0),IsNull(@CnQty,0)
If @@Error <> 0
Begin
Set @Returnid = 0
Set @ErrMsg = '插入數據出錯﹐請與電腦部聯系！'
GoTo ExitLable
End
End
Fetch Next From Table_BOM Into @BOMDetItemno,@BomDetQty,@Source
End
End
Close Table_BOM
DeAllocate Table_BOM
Update W_MRPResultDetail Set IsRunOver = 1 Where CalcuNo = @CalcuNo And FItemNo = @ItemNo And CItemNo = @Itemno
If @@ROWCount = 0
Begin
Set @Returnid = 0
Set @ErrMsg = 'MRP計算插入數據出錯，請與電腦部聯系！'
GoTo ExitLable
End
Set @SumFCQty = 0
Fetch Next From Table_FC Into @Itemno,@SumFCQty, @NeedDate
End
End
Close Table_FC
DeAllocate Table_FC
Declare @CItemNO Varchar(30)
Declare @CQty Decimal(20,5)
Declare @NdDate DateTime
Declare @dNeedQty Decimal(20,5)
Declare @Sysno Int
Set @Foot=1
--進行多次展開的循環過程
BOMLable:
Begin
Set @Count = 0
Select @Count = Count(*) From W_MRPResultDetail
Where CalcuNo = @CalcuNo And CSource = '自制'
And IsRunOver = 0
And CNeedQty > 0 -- 考慮要自制的來進行展開
If @Count > 0
Begin
Select Sysno,CItemno,CNeedQty,NeedDate,FHCQty,FPDQty
Into #ABC
From W_MRPResultDetail
Where CalcuNo = @CalcuNo And CSource = '自制'
And IsRunOver = 0
And CNeedQty > 0
Declare Table_BOMAgain Cursor for Select Sysno,CItemno,CNeedQty,NeedDate,FHCQty,FPDQty From #ABC
Open Table_BOMAgain
Fetch Next From Table_BOMAgain Into @Sysno,@CItemNO,@CQty,@NdDate,@FHCQty,@FPDQty
While (@@Fetch_Status = 0)
Begin
---記錄沒有BOM資料的ItemNO
Select @Count = Count(*)
From B_ItemBomMas
Where Itemno = @CItemNO And Issure = 1 And Bomtype = 0
If @Count = 0
Begin
Update W_MRPResultDetail Set IsRunOver = 2 Where Sysno = @Sysno
Insert Into B_ItemNotBom(Itemno,Idkey,NeedDate) Values (@CItemNO,2,@NdDate)
End
Else
Begin
-- @FLeadTime 父提前期
Select @FLeadTime = IsNull(LeadTime,0) From W_MRPResultDetail
Where CalcuNo = @CalcuNo And CItemNo = @CItemNO And sysno = @Sysno
Declare Table_BOM Cursor for Select Citemno,Qty,Source From #T6 Where Fitemno = @CItemNO
Open Table_BOM
Fetch Next From Table_BOM Into @BOMDetItemno,@BomDetQty,@Source
While (@@Fetch_Status = 0)
Begin
Set @VenPoqs = 0
Set @PdQty = 0
Set @CcQty = 0
Set @FAllQty = 0
Set @CAllQty = 0
-- Set @CusPoqs = 0
Set @CnQty = 0
-- @LeadTime 本節點的提前期
Select @LeadTime = @FLeadTime + Ceiling( IsNull( I.LeadTime ,0)/Case When IsNull(A.aDate,0)=0 Then 1 Else IsNull(A.aDate,0) End)
From VB_Items I,(Select Top 1 aDate From B_TimeArea)A
Where ItemNo = @BOMDetItemno
--車間存數
Select @PdQty = IsNull(stockqty,0) From #T3 Where Itemno = @BOMDetItemno
--貨倉庫存
Select @CcQty = IsNull(StockQty,0) From #T4 Where ItemNO = @BOMDetItemno
--計算總數
Select @Count = Count(*) From W_MRPResultDetail
Where CalcuNo = @CalcuNo And CItemNo = @BOMDetItemno
If @Count = 0
Begin
Select @CAllQty = IsNull(@CQty,0) * IsNull(@BomDetQty,0) - IsNull(@PdQty,0) - IsNull(@CcQty,0)
Select @CnQty = IsNull(@CQty,0) * IsNull(@BomDetQty,0)
End
Else
Begin
Select Top 1 @dNeedQty = IsNull(CNeedQty,0) From W_MRPResultDetail
Where CalcuNo = @CalcuNo And CItemNo = @BOMDetItemno
Order by RunDate Desc
Select @CAllQty = Case When IsNull(@dNeedQty,0) >= 0
Then IsNull(@CQty,0)*IsNull(@BomDetQty,0)
Else IsNull(@CQty,0)*IsNull(@BomDetQty,0)+IsNull(@dNeedQty,0) End
Select @CnQty = IsNull(@CQty,0)*IsNull(@BomDetQty,0)
End
-- 如果本節點毛需求小於等於0﹐不用考慮本節點
If @CnQty <= 0
Fetch Next From Table_BOM Into @BOMDetItemno,@BomDetQty,@Source
--BOM展開 20051101 不用再考慮PO欠數﹐但是要考慮車間和庫存量
Else Begin
Insert Into W_MRPResultDetail (CalcuNo,LeadTime,NeedDate,RunDate,FItemNO,FNeedQty,FPurPoqs,
FCusPoqs,FHCQty,FPDQty, CItemno,CNeedQty,CUnitQty,CPurPoqs,CCusPoqs,
CHCQty,CPDQty,CSource,IsRunOver,Foot,FQty,CQty)
Values(@CalcuNo,@LeadTime,@NdDate,GetDate(),@CItemNO,IsNull(@CQty,0),0,0, IsNull(@FHCQty,0),
IsNull(@FPDQty,0), @BOMDetItemno,@CAllQty,@BomDetQty,IsNull(@VenPoqs,0),0,
Case When @Count > 0 Then 0 Else IsNull(@CcQty,0) End,
Case When @Count > 0 Then 0 Else IsNull(@PdQty,0) End,
@Source,0,@Foot,IsNull(@CQty,0),IsNull(@CnQty,0))
If @@ROWCount = 0
Begin
Set @Returnid = 0
Set @ErrMsg = 'MRP計算插入數據出錯，請與電腦部聯系！'
GoTo ExitLable
End
Update W_MRPResultDetail Set IsRunOver = 1 Where sysno = @sysno
If @@ROWCount = 0
Begin
Set @Returnid = 0
Set @ErrMsg = 'MRP計算插入數據出錯，請與電腦部聯系！'
GoTo ExitLable
End
Fetch Next From Table_BOM Into @BOMDetItemno,@BomDetQty,@Source
End
End
Close Table_BOM
DeAllocate Table_BOM
End
Fetch Next From Table_BOMAgain Into @Sysno,@CItemNO,@CQty,@NdDate,@FHCQty,@FPDQty
End
Close Table_BOMAgain
DeAllocate Table_BOMAgain
Drop table #ABC
End
End
--/再次判斷 如果還有的話則進行bom展開﹐如果沒有的話則要開始進行時間的循環
Select @Count = 0
Select @Count = Count(*)
From W_MRPResultDetail
Where CalcuNo = @CalcuNo And CSource = '自制'
And IsRunOver = 0
And CNeedQty > 0
If @Count > 0
Begin
Select @Foot = 1 + @Foot
GoTo BOMLable--循環計算
End Else
Begin
--把BOM結構中屬於的採購的拿出來準備做採購單 ; 已訂未送在按時段循環的時候計算
Select Citemno As ItemNo,Sum(Cqty) As MaoQty,Sum(Case When CNeedQty < 0 Then 0 Else CNeedQty End) As JNeedQty ,
0 As CCusPoqs,0 As vPoqs,LeadTime, NeedDate, Sum(CHCQty) As HCQty,Sum(CPDQty) As PDQty
Into #Result1
From W_MRPResultDetail
Where CalcuNo = @CalcuNo And CSource = '採購'
Group By Citemno,LeadTime,NeedDate
-- Having Sum(CNeedQty)>0
Order By Citemno
Select @Count = 0
Select @Count = Count(*)
From #Result1
If @Count = 0
Begin
Set @Returnid = 0
Set @ErrMsg = 'MRP運算完畢,本次計算沒有需要採購的物料！'
GoTo ExitLable
End
Select R.*,B.partno,B.Partname,B.Model,B.Vendorno,B.Vendor
Into #Result2
From #Result1 R Inner Join VB_Items B On B.itemno = R.itemno
Where B.Issure = 1
--運算所有的自制FOR廠內加工 此處只考慮採購和加工兩種情況﹐虛擬件等未考慮在內!!!
Select Citemno As ItemNo,Sum(Cqty) As MaoQty,Sum(Case When CNeedQty < 0 Then 0 Else CNeedQty End) As JNeedQty ,
0 As CCusPoqs,0 As vPoqs,LeadTime, NeedDate, Sum(CHCQty) As HCQty,Sum(CPDQty) As PDQty
Into #SelfMasterResult1
From W_MRPResultDetail
Where CalcuNo = @CalcuNo And CSource <> '採購'
Group By Citemno,LeadTime,NeedDate
Order By Citemno
Select @Count = 0
Select @Count = Count(*) From #SelfMasterResult1
If @Count = 0
Begin
Set @Returnid = 0
Set @ErrMsg = 'MRP運算完畢﹐本次計算沒有要加工的物料！'
GoTo ExitLable
End
Select R.*,B.Partno,B.Partname,B.Model,B.Vendorno,B.Vendor,GetDate() as RunDate
Into #SelfMasterResult2
From #SelfMasterResult1 R Inner Join VB_Items B On B.Itemno = R.Itemno
Where B.Issure = 1
Insert Into W_MRPResultForSelf(CalcuNo,LeadTime,NeedDate,Itemno,Partno,Partname,Model,Vendorno,Vendor,
Maoqty,VPoqs,Hcqty,Pdqty,Jneedqty,RunDate)
Select @CalcuNO, LeadTime ,NeedDate,Itemno,Partno,Partname,Model,Vendorno,Vendor,
Maoqty,VPoqs,Hcqty,Pdqty,Jneedqty,RunDate
From #SelfMasterResult2
If @@Error <> 0
Begin
Set @Returnid = 0
Set @ErrMsg = '沒有生成加工單，請與電腦部聯系！'
GoTo ExitLable
End
Declare @RItemno Varchar(30)
Declare @RPartno Varchar(30)
Declare @Rpartname Varchar(100)
Declare @Rmodel Varchar(100)
Declare @RVendor Varchar(50)
Declare @RVendorno Varchar(20)
Declare @RmaoQty Decimal(20,5)
Declare @RVPoqs Decimal(20,5)
Declare @RHCQty Decimal(20,5)
Declare @RPDQty Decimal(20,5)
Declare @RJNeedQty Decimal(20,5)
Declare @NDate DateTime
Declare @LdTime Int --提前期
Declare @ID Int
Declare Talbe_Result Cursor for Select LeadTime,NeedDate,Itemno,Partno,Partname,Model,Vendorno,Vendor,Maoqty,
VPoqs,Hcqty,Pdqty,Jneedqty
From #Result2
Open Talbe_Result
Fetch Next From Talbe_Result Into @LdTime,@NDate,@RItemno,@RPartno,@Rpartname,@Rmodel,@RVendorno,
@RVendor,@RmaoQty,@RVPoqs,@RHCQty,@RPDQty,@RJNeedQty
While (@@Fetch_Status = 0)
Begin
Insert Into W_MRPResultForPo (LeadTime,NeedDate,CalcuNo,Itemno,Partno,Partname,Model,Vendorno,Vendor,
Maoqty,VPoqs,Hcqty,Pdqty,Jneedqty,RunDate)
Values (@LdTime,@NDate, @CalcuNO,@RItemno,@RPartno,@Rpartname,@Rmodel,@RVendorno,@RVendor,
@RmaoQty, @RVPoqs,@RHCQty,@RPDQty,@RJNeedQty,GetDate())
If @@ROWCount = 0
Begin
Set @Returnid = 0
Set @ErrMsg = 'MRP分配供應商出錯，請與電腦部聯系！'
GoTo ExitLable
End
Fetch Next From Talbe_Result Into @LdTime,@NDate,@RItemno,@RPartno,@Rpartname,@Rmodel,@RVendorno,
@RVendor,@RmaoQty,@RVPoqs,@RHCQty,@RPDQty,@RJNeedQty
End
Close Talbe_Result
DeAllocate Talbe_Result
End
--關閉所有已經運算過的預測單
Update W_SalesForeCastMas Set MRPClosed = 1
From W_SalesForeCastMas M, W_SalesForeCastDet D
Where D.Sysbillno = M.Sysbillno
And D.NeedDate <= @MaxEndDate
And M.Issure = 1
And M.MRPClosed = 0
And D.Havemrp = 1
If @@ROWCount = 0
Begin
Set @Returnid = 0
Set @ErrMsg = '更新預測單表頭出錯！'
GoTo ExitLable
End
Update W_SalesForeCastdet Set MRPClose = 1
From W_SalesForeCastMas M, W_SalesForeCastDet D
Where D.Sysbillno = M.Sysbillno
And D.NeedDate <= @MaxEndDate
And M.Issure = 1
And D.MRPClose = 0
And D.Havemrp = 1
If @@ROWCount = 0
Begin
Set @Returnid = 0
Set @ErrMsg = '更新預測單明細出錯！'
GoTo ExitLable
End
--關閉所有已經運算過的訂單
Update O_POMas Set MRPClosed = 1
Where poDate <= @MaxEndDate
And Issure = 1 And IsDirectExport = 0
And Syspono Not In (Select Syspono From #TA1)
If @@ROWCount = 0
Begin
Set @Returnid = 0
Set @ErrMsg = '更新訂單表頭出錯！'
GoTo ExitLable
End
Update O_PODet Set MRPClosed = 1
Where Syspono In (Select Syspono From O_POMas Where MRPClosed = 1)
If @@ROWCount = 0
Begin
Set @Returnid = 0
Set @ErrMsg = '更新訂單明細出錯！'
GoTo ExitLable
End
---------------------------------------------------------------------------------------------------------------------------------------------------
--- 進行按時間區段循環
Declare @FirstI Int --用於判斷是否第一個時間區段﹐因為這個時間段的庫存要特殊處理
Declare @aStartDate DateTime
Declare @aEndDate DateTime
Declare @TimeArea Int -- 時間區段個數
Declare @aCount Int
Select @FirstI = 0
----- 採購PO預計入庫(供應商欠數),已訂未送
--注意﹕有消息說把預計入庫都放在第一個區段內﹐不用考慮在別的區段的情況。消息有待確認!!!!!
Select B.Itemno, A.Poqs as SumFCQty,A.Purpodate as DelyDate
Into #T2
From (
Select Syspartno, Purpodate,Sum(IsNull(Poqs,0)) As Poqs
From (
Select aa.*, bb.Delyqty,IsNull(aa.Qty,0)-IsNull(bb.Delyqty,0) As Poqs
From (
Select Purpono,Purpodate ,Syspartno,Sum(Qty) As Qty
From (
Select Syspurpono,Purpono,Case When IsDate(DelyDate)=1 Then Convert(DateTime,DelyDate,120) Else PurPoDate End Purpodate
From O_PurPOMas --下面的 purpodate以後換成O_purPODet中的delydate
Where Isstop=0 And Issure=1 And Purpodate<=@MaxEndDate
) m Inner Join O_PurPODet d On m.Syspurpono=d.Syspurpono
Group By Purpono,m.Purpodate,Syspartno
) aa
Left Join (
Select d.Pono,d.Syspartno,IsNull(Sum(Qty),0) As Delyqty
From O_VendorDelyMas m
Inner Join O_VendorDelyDet d On m.SysDelyNo=d.SysDelyNo
Group By d.Pono,d.Syspartno
) bb On aa.Purpono=bb.Pono And aa.Syspartno=bb.Syspartno
Where IsNull(aa.Qty,0)<>IsNull(bb.Delyqty,0)
) TT Group By Syspartno,Purpodate
) A Inner Join
(Select Syspartno,Itemno From VB_Purgoods Group By Syspartno,Itemno ) B On A.Syspartno=B.Syspartno
--需求的全部物料號碼 For Purchase
Select Distinct CalcuNo, ItemNO,PartNo,PartName,Model,VendorNo, Vendor
Into #ItemCount
From W_MRPResultForPo
Where CalcuNo = @CalcuNo
--需求的全部自制號碼 For Self-Make
Select Distinct CalcuNo,ItemNo,PartNo,PartName,Model
Into #SelfCount
From W_MRPResultForself
Where CalcuNo = @CalcuNo
--*************** *********************************************** 開始時間循環
Declare Time_Result Cursor for Select StartDate,EndDate From B_TimeCircle
Open Time_Result
Fetch Next From Time_Result Into @aStartDate, @aEndDate
While (@@Fetch_Status = 0)
Begin
-----------------------------------------------------------------------------------------------------------
If @FirstI = 0
Begin
--第一時區的預計入庫計算For Purchase
Select Sum(SumFCQty) As VPoqs,ItemNo
Into #Futureqty1
From #T2
Where DelyDate < @aEndDate + 1
Group By ItemNo
Select ItemNo, Sum(IsNull(VPoqs,0))VPoqs, Sum(IsNull(HCQty,0))HCQty , Sum(IsNull(PDQty,0))PDQty
Into #KuCunQty
From W_MRPResultForPo Where CalcuNO = @CalcuNO
Group By ItemNo
Select R.ItemNo,PartNo,PartName,Model,VendorNo,Vendor,Sum(Maoqty)Maoqty,Sum(JNeedQty) JNeedQty,
Sum(R.VPoqs)VPoqs,P.HCQty As HCQty,P.PDQty As PDQty,Max(NeedDate) NeedDate,
Max(IsNull(LeadTime,0)) LeadTime
Into #Nextqty1
From W_MRPResultForPo R Left Join #KuCunQty P On R.ItemNo = P.ItemNo
Where NeedDate < @aEndDate + 1
And CalcuNO = @CalcuNO
Group By R.ItemNo,PartNo,PartName,Model,VendorNo,Vendor ,P.HCQty, P.PDQty
--第一時間區段的毛需求 For Self-Make
Select ItemNo,PartNo,PartName,Model,VendorNo,Vendor,Sum(Maoqty)Maoqty,Sum(JNeedQty) JNeedQty,
Sum(IsNull(HCQty,0)) + Sum(IsNull(PDQty,0)) As StockQty,--Sum(IsNull(VPoqs,0))+Sum(IsNull(HCQty,0))+Sum(IsNull(PDQty,0))-Sum(Maoqty)
Sum(IsNull(VPoqs,0))VPoqs,Sum(IsNull(HCQty,0))HCQty,Sum(IsNull(PDQty,0))PDQty,
Max(NeedDate) As NeedDate,Max(IsNull(LeadTime,0)) LeadTime
Into #NextqtyA1
From W_MRPResultForSelf
Where NeedDate < @aEndDate + 1
And CalcuNO = @CalcuNO
Group By ItemNo,PartNo,PartName,Model,VendorNo,Vendor
--------------------------------- 考慮安全庫存﹐最小批量和批量增量
Select @CalcuNO As CalcuNo, 1 As TimeArea,N.ItemNO,N.PartNo,N.PartName,N.Model,N.VendorNo, N.Vendor,
IsNull(N.Maoqty,0) As Maoqty,
Case When (( IsNull(N.HCQty,0) + IsNull(N.PDQty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0) ) < 0 Then
(Case When IsNull(I.BatchAppendQty,0) = 0 Then
(Case When ((0 - (( IsNull(N.HCQty,0) + IsNull(N.PDQty,0) + IsNull(F.VPoqs,0))*1.0 - IsNull(N.Maoqty,0) )+IsNull(I.SecInv,0))*IsNull(D.Yield,0)/100 )<=IsNull(I.MinQty,0) Then
IsNull(I.MinQty,0)
Else ((0 - (( IsNull(N.HCQty,0)+IsNull(N.PDQty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0) )+IsNull(I.SecInv,0))*IsNull(D.Yield,0)/100 )
End)
Else Case When (Case When ((0 - (( IsNull(N.HCQty,0) + IsNull(N.PDQty,0) + IsNull(F.VPoqs,0))*1.0 - IsNull(N.Maoqty,0) ) + IsNull(I.SecInv,0))*IsNull(D.Yield,0)/100 ) <= IsNull(I.MinQty,0) Then
IsNull(I.MinQty,0)
Else ((0 - (( IsNull(N.HCQty,0) + IsNull(N.PDQty,0) + IsNull(F.VPoqs,0))*1.0 - IsNull(N.Maoqty,0) )+IsNull(I.SecInv,0))*IsNull(D.Yield,0)/100 )
End) <= IsNull(I.BatchAppendQty,0) Then IsNull(I.BatchAppendQty,0)
Else
Case When ( Convert(int,(Case When ((0 - (( IsNull(N.HCQty,0)+IsNull(N.PDQty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0) )+IsNull(I.SecInv,0))*IsNull(D.Yield,0)/100 )<=IsNull(I.MinQty,0) Then
IsNull(I.MinQty,0)
Else ((0 - ( (IsNull(N.HCQty,0)+IsNull(N.PDQty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0) )+IsNull(I.SecInv,0))*IsNull(D.Yield,0)/100 )
End))% Convert(int,Case When IsNull(I.BatchAppendQty,0)=0 Then 1 Else IsNull(I.BatchAppendQty,0) End))=0 Then
(Case When ((0 - (( IsNull(N.HCQty,0)+IsNull(N.PDQty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0) )+IsNull(I.SecInv,0))*IsNull(D.Yield,0)/100 )<=IsNull(I.MinQty,0) Then
IsNull(I.MinQty,0)
Else ((0 - (( IsNull(N.HCQty,0)+IsNull(N.PDQty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0) )+IsNull(I.SecInv,0))*IsNull(D.Yield,0)/100 )
End)
Else
( ( (Case When ((0 - (( IsNull(N.HCQty,0)+IsNull(N.PDQty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0) )+IsNull(I.SecInv,0))*IsNull(D.Yield,0)/100 )<=IsNull(I.MinQty,0) Then
IsNull(I.MinQty,0)
Else ((0 - (( IsNull(N.HCQty,0)+IsNull(N.PDQty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0) )+IsNull(I.SecInv,0))*IsNull(D.Yield,0)/100 )
End)/Case When IsNull( I.BatchAppendQty,0)=0 Then 1 Else IsNull(I.BatchAppendQty,0) End)+1)* IsNull(I.BatchAppendQty,0)
End
End
End)*IsNull(D.Yield,0)/100 + ( IsNull(N.HCQty,0)+IsNull(N.PDQty,0)+IsNull(F.VPoqs,0)-IsNull(N.Maoqty,0) )
Else
IsNull(N.HCQty,0)+IsNull(N.PDQty,0)+IsNull(F.VPoqs,0)-IsNull(N.Maoqty,0)
End as Stockqty,
IsNull(F.VPoqs,0) As PlanIn,0 As PlanNum ,N.NeedDate,N.LeadTime,
Case When ((IsNull(N.HCQty,0)+IsNull(N.PDQty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0))< 0 Then
(0 - ((IsNull(N.HCQty,0)+IsNull(N.PDQty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0))+IsNull(I.SecInv,0))
Else 0
End As Needqty,
Case When ((IsNull(N.HCQty,0)+IsNull(N.PDQty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0))< 0 Then
(Case When IsNull(I.BatchAppendQty,0)=0 Then
(Case When ((0 - ((IsNull(N.HCQty,0)+IsNull(N.PDQty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0))+IsNull(I.SecInv,0))*IsNull(D.Yield,0)/100 )<=IsNull(I.MinQty,0) Then
IsNull(I.MinQty,0)
Else ((0 - ((IsNull(N.HCQty,0)+IsNull(N.PDQty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0))+IsNull(I.SecInv,0))*IsNull(D.Yield,0)/100 )
End)
Else Case When (Case When ((0 - ((IsNull(N.HCQty,0)+IsNull(N.PDQty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0))+IsNull(I.SecInv,0))*IsNull(D.Yield,0)/100 )<=IsNull(I.MinQty,0) Then
IsNull(I.MinQty,0)
Else ((0 - ((IsNull(N.HCQty,0)+IsNull(N.PDQty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0))+IsNull(I.SecInv,0))*IsNull(D.Yield,0)/100 )
End)<= IsNull(I.BatchAppendQty,0) Then IsNull(I.BatchAppendQty,0)
Else
Case When (Convert(int, (Case When ((0 - ((IsNull(N.HCQty,0)+IsNull(N.PDQty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0))+IsNull(I.SecInv,0))*IsNull(D.Yield,0)/100 )<=IsNull(I.MinQty,0) Then
IsNull(I.MinQty,0)
Else ((0 - ((IsNull(N.HCQty,0)+IsNull(N.PDQty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0))+IsNull(I.SecInv,0))*IsNull(D.Yield,0)/100 )
End))%Convert(int, Case When IsNull(I.BatchAppendQty,0)=0 Then 1 Else IsNull(I.BatchAppendQty,0) End))=0 Then
(Case When ((0 - ((IsNull(N.HCQty,0)+IsNull(N.PDQty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0))+IsNull(I.SecInv,0))*IsNull(D.Yield,0)/100 )<=IsNull(I.MinQty,0) Then
IsNull(I.MinQty,0)
Else ((0 - ((IsNull(N.HCQty,0)+IsNull(N.PDQty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0))+IsNull(I.SecInv,0))*IsNull(D.Yield,0)/100 )
End)
Else
( ( (Case When ((0 - ((IsNull(N.HCQty,0)+IsNull(N.PDQty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0))+IsNull(I.SecInv,0))*IsNull(D.Yield,0)/100 )<=IsNull(I.MinQty,0) Then
IsNull(I.MinQty,0)
Else ((0 -((IsNull(N.HCQty,0)+IsNull(N.PDQty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0))+IsNull(I.SecInv,0))*IsNull(D.Yield,0)/100 )
End)/ Case When IsNull(I.BatchAppendQty,0)=0 Then 1 Else IsNull(I.BatchAppendQty,0) End)+1)* IsNull(I.BatchAppendQty,0)
End
End
End)
Else 0
End As PlanPoNum
Into #TimeArea1
From #Nextqty1 N Left Join #Futureqty1 F On N.ItemNO = F.ItemNO
Left Join VB_Items I On N.ItemNo = I.ItemNo
Left Join (Select Distinct M.Yield,D.ItemNo From B_ItemBomMas M Inner Join B_ItemBomDet D On M.sysbillNo = D.sysbillNo) D On N.ItemNo = D.ItemNo
End
--其他時間區段For Purchase
Else Begin
--不是第一時區的預計入庫計算For Purchase
Select Sum(SumFCQty) As VPoqs,ItemNo
Into #Futureqty
From #T2
Where DelyDate >= @aStartDate And DelyDate < @aEndDate+1
Group By ItemNo
Select ItemNo,PartNo,PartName,Model,VendorNo,Vendor,Sum(Maoqty)Maoqty,Sum( VPoqs) VPoqs,
0 As HCQty,0 As PDQty,Max(NeedDate) NeedDate,Max(IsNull(LeadTime,0)) LeadTime
Into #Nextqty
From W_MRPResultForPo
Where NeedDate >= @aStartDate
And NeedDate < @aEndDate + 1
And CalcuNo = @CalcuNo
Group By ItemNo,PartNo,PartName,Model,VendorNo,Vendor
--其他時間區段For Self-Mastery
Select ItemNo,PartNo,PartName,Model,VendorNo,Vendor,Sum(Maoqty)Maoqty,Sum(JNeedQty) NeedQty,
Max(NeedDate) NeedDate,Max(IsNull(LeadTime,0)) LeadTime
Into #NextqtyA
From W_MRPResultForSelf
Where NeedDate >= @aStartDate
And NeedDate < @aEndDate + 1
And CalcuNo = @CalcuNo
Group By ItemNo,PartNo,PartName,Model,VendorNo,Vendor
--------------------------------------
Select @CalcuNO As CalcuNo,IsNull(@TimeArea,0)+1 As TimeArea, N.ItemNO,N.PartNo,N.PartName,N.Model,N.VendorNo,
N.Vendor,IsNull(N.Maoqty,0) As Maoqty,
Case When (IsNull(P.Stockqty,0)+IsNull(F.VPoqs,0)-IsNull(N.Maoqty,0))< 0 Then
(0 - ((IsNull(P.Stockqty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0))+IsNull(I.SecInv,0))
Else 0
End As Needqty,
Case When ((IsNull(P.Stockqty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0))< 0 Then
(Case When IsNull(I.BatchAppendQty,0)=0 Then
(Case When ((0 - ((IsNull(P.Stockqty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0))+IsNull(I.SecInv,0))*IsNull(D.Yield,0)/100 )<=IsNull(I.MinQty,0) Then
IsNull(I.MinQty,0)
Else ((0 -( (IsNull(P.Stockqty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0))+IsNull(I.SecInv,0))*IsNull(D.Yield,0)/100 )
End)
Else Case When (Case When ((0 - ((IsNull(P.Stockqty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0))+IsNull(I.SecInv,0))*IsNull(D.Yield,0)/100 )<=IsNull(I.MinQty,0) Then
IsNull(I.MinQty,0)
Else ((0 -( (IsNull(P.Stockqty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0))+IsNull(I.SecInv,0))*IsNull(D.Yield,0)/100 )
End)<= IsNull(I.BatchAppendQty,0) Then IsNull(I.BatchAppendQty,0)
Else
Case When ( Convert(int,(Case When ((0 -( (IsNull(P.Stockqty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0))+IsNull(I.SecInv,0))*IsNull(D.Yield,0)/100 )<=IsNull(I.MinQty,0) Then
IsNull(I.MinQty,0)
Else ((0 - ((IsNull(P.Stockqty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0))+IsNull(I.SecInv,0))*IsNull(D.Yield,0)/100 )
End))% Convert(int,Case When IsNull(I.BatchAppendQty,0)=0 Then 1 Else IsNull(I.BatchAppendQty,0) End))=0 Then
(Case When ((0 - ((IsNull(P.Stockqty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0))+IsNull(I.SecInv,0))*IsNull(D.Yield,0)/100 )<=IsNull(I.MinQty,0) Then
IsNull(I.MinQty,0)
Else ((0 - ((IsNull(P.Stockqty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0))+IsNull(I.SecInv,0))*IsNull(D.Yield,0)/100 )
End)
Else
( ( (Case When ((0 - ((IsNull(P.Stockqty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0))+IsNull(I.SecInv,0))*IsNull(D.Yield,0)/100 )<=IsNull(I.MinQty,0) Then
IsNull(I.MinQty,0)
Else ((0 - ((IsNull(P.Stockqty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0))+IsNull(I.SecInv,0))*IsNull(D.Yield,0)/100 )
End)/ Case When IsNull(I.BatchAppendQty,0)=0 Then 1 Else IsNull(I.BatchAppendQty,0) End)+1)* IsNull(I.BatchAppendQty,0)
End
End
End)*IsNull(D.Yield,0)/100 + ((IsNull(P.Stockqty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0))
Else
( IsNull(P.Stockqty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0)
End as Stockqty,
IsNull(F.VPoqs,0) As PlanIn,0 As PlanNum ,
Case When ((IsNull(P.Stockqty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0))< 0 Then
(Case When IsNull(I.BatchAppendQty,0)=0 Then
(Case When ((0 - ((IsNull(P.Stockqty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0))+IsNull(I.SecInv,0))*IsNull(D.Yield,0)/100 )<=IsNull(I.MinQty,0) Then
IsNull(I.MinQty,0)
Else ((0 - ((IsNull(P.Stockqty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0))+IsNull(I.SecInv,0))*IsNull(D.Yield,0)/100 )
End)
Else Case When (Case When ((0 - ((IsNull(P.Stockqty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0))+IsNull(I.SecInv,0))*IsNull(D.Yield,0)/100 )<=IsNull(I.MinQty,0) Then
IsNull(I.MinQty,0)
Else ((0 - ((IsNull(P.Stockqty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0))+IsNull(I.SecInv,0))*IsNull(D.Yield,0)/100 )
End)<= IsNull(I.BatchAppendQty,0) Then IsNull(I.BatchAppendQty,0)
Else
Case When ( Convert(int,(Case When ((0 - ((IsNull(P.Stockqty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0))+IsNull(I.SecInv,0))*IsNull(D.Yield,0)/100 )<=IsNull(I.MinQty,0) Then
IsNull(I.MinQty,0)
Else ((0 - ((IsNull(P.Stockqty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0))+IsNull(I.SecInv,0))*IsNull(D.Yield,0)/100 )
End))% Convert(int,Case When IsNull(I.BatchAppendQty,0)=0 Then 1 Else IsNull(I.BatchAppendQty,0) End))=0 Then
(Case When ((0 - ((IsNull(P.Stockqty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0))+IsNull(I.SecInv,0))*IsNull(D.Yield,0)/100 )<=IsNull(I.MinQty,0) Then
IsNull(I.MinQty,0)
Else ((0 - ((IsNull(P.Stockqty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0))+IsNull(I.SecInv,0))*IsNull(D.Yield,0)/100 )
End)
Else
( ( (Case When ((0 - ((IsNull(P.Stockqty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0))+IsNull(I.SecInv,0))*IsNull(D.Yield,0)/100 )<=IsNull(I.MinQty,0) Then
IsNull(I.MinQty,0)
Else ((0 - ((IsNull(P.Stockqty,0)+IsNull(F.VPoqs,0))*1.0-IsNull(N.Maoqty,0))+IsNull(I.SecInv,0))*IsNull(D.Yield,0)/100 )
End)/Case When IsNull( I.BatchAppendQty,0)=0 Then 1 Else IsNull(I.BatchAppendQty,0) End)+1)* IsNull(I.BatchAppendQty,0)
End
End
End)
Else 0
End As PlanPoNum,
N.NeedDate,N.LeadTime
Into #TimeArea2
From #Nextqty N Left Join #Futureqty F On N.ItemNO = F.ItemNO
Left Join (Select * From W_MRPData
Where CalcuNo = @CalcuNO And TimeArea = @FirstI And Flag = 0 ) P On N.ItemNO = P.ItemNO
Left Join VB_Items I On N.ItemNo = I.ItemNo
Left Join (Select Distinct M.Yield,D.ItemNo From B_ItemBomMas M
Inner Join B_ItemBomDet D On M.sysbillNo=D.sysbillNo) D On N.ItemNo = D.ItemNo
End
---------------------------------------------------------------------------------------------------------------
--按時間循環 開始
If @FirstI = 0 --第一時間區段
Begin
-- 先插入自制記錄 For Self-make
Select @Count = 0
Select @aCount = 0
Select @Count = Count(*)
From #SelfCount
Select @aCount = Count(*)
From #NextqtyA1
If @Count <> @aCount
Begin
Insert W_MRPData(CalcuNo,TimeArea,S.ItemNo,PartNo,PartName,Model, VendorNo, Vendor,
Maoqty,Stockqty,PlanIn,Needqty,PlanNum,PlanPoNum,NeedDate,LeadTime,Flag)
Select @CalcuNo,1 As TimeArea,S.ItemNo,PartNo,PartName,Model,'' As VendorNo,'' As Vendor,
0 As Maoqty,IsNull(F.HCQty,0)+IsNull(F.PDQty,0) As Stockqty,0 As PlanIn,0 As NeedQty,
0 As PlanNum,0 As PlanPoNum, @aStartDate ,0 As LeadTime,1 As Flag
From #SelfCount S Left Join (Select Top 1 ItemNO,HCQty,PDQty From W_MRPResultForSelf
Where CalcuNO=@CalcuNo And HCQty<>0 Or (PDQty<>0))F
On S.ItemNo = F.ItemNo
If @@Error <> 0
Begin
Set @Returnid = 0
Set @ErrMsg = 'MRP計算插入數據出錯﹐請與電腦部聯系！'
GoTo ExitLable
End
Update W_MRPData Set Maoqty=IsNull(N.Maoqty,0),LeadTime = IsNull(N.LeadTime,0),
Stockqty=Case When (IsNull(N.Maoqty,0) - IsNull(N.Stockqty,0))>0 Then
( Case When IsNull(I.BatchAppendQty,0)=0 Then
Case When (IsNull(N.Maoqty,0) - IsNull(N.Stockqty,0)+IsNull(I.SecInv,0))*100/IsNull(D.Yield,100)<=IsNull(I.MinQty,0) Then
IsNull(I.MinQty,0) Else (IsNull(N.Maoqty,0) - IsNull(N.Stockqty,0)+IsNull(I.SecInv,0))*100/IsNull(D.Yield,100) End
Else Case When (Case When (IsNull(N.Maoqty,0) - IsNull(N.Stockqty,0) + IsNull(I.SecInv,0))*100/IsNull(D.Yield,100)<=IsNull(I.MinQty,0) Then
IsNull(I.MinQty,0) Else (IsNull(N.Maoqty,0)-IsNull(N.Stockqty,0)+IsNull(I.SecInv,0))*100/IsNull(D.Yield,100) End)<=IsNull(I.BatchAppendQty,0) Then
IsNull(I.BatchAppendQty,0) Else Case When Convert(int,(Case When (N.Maoqty-N.Stockqty+IsNull(I.SecInv,0))*100/IsNull(D.Yield,100)<=IsNull(I.MinQty,0) Then
IsNull(I.MinQty,0) Else (IsNull(N.Maoqty,0) - IsNull(N.Stockqty,0) + IsNull(I.SecInv,0))*100/IsNull(D.Yield,100) End))%Convert(int,Case When IsNull(I.BatchAppendQty,0)=0 Then 1 Else IsNull(I.BatchAppendQty,0) End)=0
Then (Case When (IsNull(N.Maoqty,0) - IsNull(N.Stockqty,0) + IsNull(I.SecInv,0))*100/IsNull(D.Yield,100)<=IsNull(I.MinQty,0) Then
IsNull(I.MinQty,0) Else (IsNull(N.Maoqty,0) - IsNull(N.Stockqty,0) + IsNull(I.SecInv,0))*100/IsNull(D.Yield,100) End)
Else ( (Case When (IsNull(N.Maoqty,0) - IsNull(N.Stockqty,0) + IsNull(I.SecInv,0))*100/IsNull(D.Yield,100)<=IsNull(I.MinQty,0) Then
IsNull(I.MinQty,0) Else (IsNull(N.Maoqty,0) - IsNull(N.Stockqty,0) + IsNull(I.SecInv,0))*100/IsNull(D.Yield,100) End)/Case When IsNull(I.BatchAppendQty,0)=0 Then 1 Else IsNull(I.BatchAppendQty,0) End +1)*IsNull(I.BatchAppendQty,0)
End End End)*IsNull(D.Yield,100)/100+IsNull(N.StockQty,0) - IsNull(N.Maoqty,0)
Else (IsNull(N.Stockqty,0) - IsNull(N.Maoqty,0)) End,
NeedQty=Case When (IsNull(N.Maoqty,0)-IsNull(N.Stockqty,0))>0 Then (IsNull(N.Maoqty,0)-IsNull(N.Stockqty,0)+IsNull(I.SecInv,0))
Else 0 End
From W_MRPData M Inner Join (Select ItemNo,Maoqty,JNeedQty,StockQty,LeadTime
From #NextqtyA1)N On M.ItemNo = N.ItemNo
Left Join VB_Items I On M.ItemNo = I.ItemNo
Left Join (Select Distinct Yield,ItemNo From B_ItemBomMas ) D On N.ItemNo = D.ItemNo
Where CalcuNo = @CalcuNo And Flag = 1 And TimeArea = 1
If @@Error <> 0
Begin
Set @Returnid = 0
Set @ErrMsg = 'MRP計算修改數據出錯﹐請與電腦部聯系！'
GoTo ExitLable
End
End
Else
Begin
Insert W_MRPData(CalcuNo,TimeArea,ItemNo,PartNo,PartName,Model,VendorNo,Vendor,Maoqty,
Stockqty, PlanIn,Needqty,PlanNum,PlanPoNum,NeedDate,LeadTime,Flag)
Select @CalcuNo,@FirstI + 1 As TimeArea,N.ItemNO,PartNo,PartName,Model,VendorNo, Vendor,
Maoqty,Case When (IsNull(N.Maoqty,0) - (IsNull(VPoqs,0) + IsNull(HCQty,0) + IsNull(PDQty,0))) > 0 Then
(Case When IsNull(I.BatchAppendQty,0) = 0 Then
Case When (IsNull(N.Maoqty,0) - (IsNull(VPoqs,0) + IsNull(HCQty,0) + IsNull(PDQty,0))+IsNull(I.SecInv,0))*100/IsNull(D.Yield,100)<=IsNull(I.MinQty,0) Then
IsNull(I.MinQty,0) Else (IsNull(N.Maoqty,0) - (IsNull(VPoqs,0) + IsNull(HCQty,0) + IsNull(PDQty,0))+IsNull(I.SecInv,0))*100/IsNull(D.Yield,100) End
Else Case When (Case When (IsNull(N.Maoqty,0) - (IsNull(VPoqs,0) + IsNull(HCQty,0) + IsNull(PDQty,0))+IsNull(I.SecInv,0))*100/IsNull(D.Yield,100)<=IsNull(I.MinQty,0) Then
IsNull(I.MinQty,0) Else (IsNull(N.Maoqty,0) - (IsNull(VPoqs,0) + IsNull(HCQty,0) + IsNull(PDQty,0))+IsNull(I.SecInv,0))*100/IsNull(D.Yield,100) End)<=IsNull(I.BatchAppendQty,0) Then
IsNull(I.BatchAppendQty,0) Else Case When Convert(int,(Case When (N.Maoqty-(VPoqs+HCQty+PDQty)+IsNull(I.SecInv,0))*100/IsNull(D.Yield,100)<=IsNull(I.MinQty,0) Then
IsNull(I.MinQty,0) Else (IsNull(N.Maoqty,0) - (IsNull(VPoqs,0) + IsNull(HCQty,0) + IsNull(PDQty,0))+IsNull(I.SecInv,0))*100/IsNull(D.Yield,100) End))%Convert(int,Case When IsNull(I.BatchAppendQty,0)=0 Then 1 Else IsNull(I.BatchAppendQty,0) End)=0
Then (Case When (IsNull(N.Maoqty,0) - (IsNull(VPoqs,0) + IsNull(HCQty,0) + IsNull(PDQty,0)) + IsNull(I.SecInv,0))*100/IsNull(D.Yield,100)<=IsNull(I.MinQty,0) Then
IsNull(I.MinQty,0) Else (IsNull(N.Maoqty,0) - (IsNull(VPoqs,0) + IsNull(HCQty,0) + IsNull(PDQty,0))+IsNull(I.SecInv,0))*100/IsNull(D.Yield,100) End)
Else ( (Case When (IsNull(N.Maoqty,0) - (IsNull(VPoqs,0) + IsNull(HCQty,0) + IsNull(PDQty,0))+IsNull(I.SecInv,0))*100/IsNull(D.Yield,100)<=IsNull(I.MinQty,0) Then
IsNull(I.MinQty,0) Else (IsNull(N.Maoqty,0) - (IsNull(VPoqs,0) + IsNull(HCQty,0) + IsNull(PDQty,0))+IsNull(I.SecInv,0))*100/IsNull(D.Yield,100) End)/Case When IsNull(I.BatchAppendQty,0)=0 Then 1 Else IsNull(I.BatchAppendQty,0) End+1)*IsNull(I.BatchAppendQty,0)
End End End)*IsNull(D.Yield,100)/100+(IsNull(VPoqs,0) + IsNull(HCQty,0) + IsNull(PDQty,0)) - IsNull(Maoqty,0)
Else (IsNull(VPoqs,0) + IsNull(HCQty,0) + IsNull(PDQty,0) - IsNull(N.Maoqty,0)) End As Stockqty,
0 As PlanIn,
Case When (IsNull(Maoqty,0)-(IsNull(VPoqs,0)+IsNull(HCQty,0)+IsNull(PDQty,0)))>0 Then (IsNull(Maoqty,0)-(IsNull(VPoqs,0)+IsNull(HCQty,0)+IsNull(PDQty,0)))+IsNull(I.SecInv,0)
Else 0 End As Needqty,0 As PlanNum ,
0 As PlanPoNum,NeedDate,LeadTime,1 As Flag
From #NextqtyA1 N Left Join (Select ItemNo,SecInv,BatchAppendQty,MinQty From VB_Items) I On N.ItemNo=I.ItemNo
Left Join (Select Distinct Yield,ItemNo From B_ItemBomMas) D On N.ItemNo=D.ItemNo
If @@Error <> 0
Begin
Set @Returnid = 0
Set @ErrMsg = 'MRP計算插入數據出錯﹐請與電腦部聯系！'
GoTo ExitLable
End
End
-- 插入採購記錄 For Purchse
Select @Count = 0
Select @aCount = 0
Select @Count = Count(*)
From #TimeArea1
Select @aCount = Count(*)
From #ItemCount
If @Count <> @aCount
Begin
Insert W_MRPData(CalcuNo,TimeArea,ItemNo,PartNo,PartName,Model,VendorNo,Vendor,Maoqty,
Stockqty,PlanIn,Needqty,PlanNum,PlanPoNum,NeedDate,LeadTime,Flag)
Select @CalcuNo,1 As TimeArea,M.ItemNO,PartNo,PartName,Model,VendorNo, Vendor,0 As Maoqty,
( IsNull(F.VPoqs,0)+IsNull(D.HCQty,0)+IsNull(D.PDQty,0)) As Stockqty ,
IsNull(F.VPoqs,0) As PlanIn,0 As Needqty,0 As PlanNum ,0 As PlanPoNum,
@aStartDate, 0,0 As Flag
From #ItemCount M Left Join #Futureqty1 F On M.ItemNo = F.ItemNo
Left Join #KuCunQty D On M.ItemNo=D.ItemNo
If @@Error <> 0
Begin
Set @Returnid = 0
Set @ErrMsg = 'MRP計算插入數據出錯﹐請與電腦部聯系！'
GoTo ExitLable
End
Update W_MRPData Set Maoqty = N.Maoqty,Needqty = N.Needqty,PlanPoNum = M.PlanPoNum + N.PlanPoNum,
LeadTime = N.LeadTime,Stockqty = N.Stockqty,PlanIn = N.PlanIn
From W_MRPData M Inner Join
(Select ItemNo, Maoqty,Needqty,Stockqty,PlanIn,LeadTime,PlanPoNum
From #TimeArea1 )N On M.ItemNo = N.ItemNo
Where CalcuNo = @CalcuNo And TimeArea = @FirstI + 1 And Flag = 0
If @@Error <> 0
Begin
Set @Returnid = 0
Set @ErrMsg = 'MRP計算修改數據出錯﹐請與電腦部聯系！'
GoTo ExitLable
End
End
Else
Begin
Insert W_MRPData(CalcuNo,TimeArea,ItemNo,PartNo,PartName,Model,VendorNo,Vendor,Maoqty,
Stockqty, PlanIn,Needqty,PlanNum,PlanPoNum,NeedDate,LeadTime,Flag)
Select CalcuNo,TimeArea,ItemNO,PartNo,PartName,Model,VendorNo, Vendor,Maoqty,
Case When IsNull(Stockqty,0)<=0 Then 0 Else IsNull(Stockqty,0) End ,PlanIn,Needqty,
PlanNum , PlanPoNum,NeedDate,LeadTime,0 As Flag
From #TimeArea1
If @@Error <> 0
Begin
Set @Returnid = 0
Set @ErrMsg = 'MRP計算插入數據出錯﹐請與電腦部聯系！'
GoTo ExitLable
End
End
Drop table #Futureqty1
Drop table #Nextqty1
Drop table #KuCunQty
Drop table #NextqtyA1
Drop table #TimeArea1
End
Else --其他時間區段
Begin
-- For Self-Make
Select @Count = 0
Select @aCount = 0
Select @Count = Count(*)
From #SelfCount
Select @aCount = Count(*)
From #NextqtyA
If @Count <> @aCount
Begin
Insert W_MRPData(CalcuNo,TimeArea,ItemNo,PartNo,PartName,Model,VendorNo,Vendor,Maoqty,
Stockqty, PlanIn,Needqty,PlanNum,PlanPoNum,NeedDate,LeadTime,Flag)
Select @CalcuNo,@FirstI + 1 As TimeArea,M.ItemNo,M.PartNo,M.PartName,M.Model,
'' As VendorNo,'' As Vendor, 0 As Maoqty,D.Stockqty,0 As PlanIn,0 As Needqty,
0 As PlanNum,0 As PlanPoNum,@aStartDate, 0 As LeadTime,1 As Flag
From #SelfCount M
Left Join (Select ItemNo,Stockqty From W_MRPData Where CalcuNo = @CalcuNo And Flag = 1
And TimeArea = @FirstI) D On M.ItemNo = D.ItemNo
If @@Error <> 0
Begin
Set @Returnid = 0
Set @ErrMsg = 'MRP計算插入數據出錯﹐請與電腦部聯系！'
GoTo ExitLable
End
Update W_MRPData Set Maoqty =IsNull( N.Maoqty,0),Needqty = Case When (IsNull(N.Maoqty,0)-IsNull(D.Stockqty,0))<=0
Then 0 Else (IsNull(N.Maoqty,0)-IsNull(D.Stockqty,0))+IsNull(I.SecInv,0) End,
Stockqty = Case When (IsNull(N.Maoqty,0) - IsNull(D.Stockqty,0))>0 Then
( Case When IsNull(I.BatchAppendQty,0)=0 Then
Case When (N.Maoqty-D.Stockqty+IsNull(I.SecInv,0))*100/IsNull(O.Yield,100)<=IsNull(I.MinQty,0) Then
IsNull(I.MinQty,0) Else (IsNull(N.Maoqty,0) - IsNull(D.Stockqty,0)+IsNull(I.SecInv,0))*100/IsNull(O.Yield,100) End
Else Case When (Case When (IsNull(N.Maoqty,0) - IsNull(D.Stockqty,0) +IsNull(I.SecInv,0))*100/IsNull(O.Yield,100)<=IsNull(I.MinQty,0) Then
IsNull(I.MinQty,0) Else (IsNull(N.Maoqty,0) - IsNull(D.Stockqty,0) +IsNull(I.SecInv,0))*100/IsNull(O.Yield,100) End)<=IsNull(I.BatchAppendQty,0) Then
IsNull(I.BatchAppendQty,0) Else Case When Convert(int,(Case When (IsNull(N.Maoqty,0)-IsNull(D.Stockqty,0)+IsNull(I.SecInv,0))*100/IsNull(O.Yield,100)<=IsNull(I.MinQty,0) Then
IsNull(I.MinQty,0) Else (IsNull(N.Maoqty,0) - IsNull(D.Stockqty,0) + IsNull(I.SecInv,0))*100/IsNull(O.Yield,100) End))%Convert(int,Case When IsNull(I.BatchAppendQty,0)=0 Then 1 Else IsNull(I.BatchAppendQty,0) End)=0
Then (Case When (IsNull(N.Maoqty,0) - IsNull(D.Stockqty,0)+IsNull(I.SecInv,0))*100/IsNull(O.Yield,100)<=IsNull(I.MinQty,0) Then
IsNull(I.MinQty,0) Else (IsNull(N.Maoqty,0) - IsNull(D.Stockqty,0)+IsNull(I.SecInv,0))*100/IsNull(O.Yield,100) End)
Else ( (Case When (IsNull(N.Maoqty,0) - IsNull(D.Stockqty,0) + IsNull(I.SecInv,0))*100/IsNull(O.Yield,100)<=IsNull(I.MinQty,0) Then
IsNull(I.MinQty,0) Else (IsNull(N.Maoqty,0) - IsNull(D.Stockqty,0) +IsNull(I.SecInv,0))*100/IsNull(O.Yield,100) End)/Case When IsNull(I.BatchAppendQty,0)=0 Then 1 Else IsNull(I.BatchAppendQty,0) End+1)*IsNull(I.BatchAppendQty,0)
End End End)*IsNull(O.Yield,100)/100+IsNull(D.Stockqty,0) - IsNull(N.Maoqty,0)
Else (IsNull(D.Stockqty,0)-IsNull(N.Maoqty,0)) End,
NeedDate=Case When (@FirstI+1-M.LeadTime)<=0 then @aStartDate
Else (Select StartDate From B_TimeCircle Where Sn=@FirstI+1-M.LeadTime)
End
From W_MRPData M Inner Join (Select ItemNo, Maoqty,NeedQty,LeadTime
From #NextqtyA )N On M.ItemNo = N.ItemNo
Left Join (Select ItemNo,Stockqty From W_MRPData Where CalcuNo = @CalcuNo And Flag = 1
And TimeArea=@FirstI)D On M.ItemNo=D.ItemNo
Left Join (Select ItemNo,MinQty,BatchAppendQty,SecInv From VB_Items) I On M.ItemNo = I.ItemNo
Left Join (Select Distinct Yield,ItemNo From B_ItemBomMas) O On M.ItemNo = O.ItemNo
Where CalcuNo = @CalcuNo And TimeArea = @FirstI + 1 And Flag = 1
If @@Error <> 0
Begin
Set @Returnid = 0
Set @ErrMsg = 'MRP計算修改數據出錯﹐請與電腦部聯系！'
GoTo ExitLable
End
End
Else
Begin
Insert W_MRPData(CalcuNo,TimeArea,ItemNo,PartNo,PartName,Model,VendorNo,Vendor,Maoqty,
Stockqty, PlanIn,Needqty,PlanNum,PlanPoNum,NeedDate,LeadTime,Flag)
Select @CalcuNo,@FirstI+1 As TimeArea,M.ItemNo,M.PartNo,M.PartName,M.Model,M.VendorNo,
M.Vendor,IsNull(M.Maoqty,0)As Maoqty,Case When (IsNull(M.Maoqty,0) - IsNull(D.Stockqty,0))>0 Then
( Case When IsNull(I.BatchAppendQty,0)=0 Then
Case When (IsNull(M.Maoqty,0) - IsNull(D.Stockqty,0)+IsNull(I.SecInv,0))*100/IsNull(O.Yield,100)<=IsNull(I.MinQty,0) Then
IsNull(I.MinQty,0) Else (IsNull(M.Maoqty,0) - IsNull(D.Stockqty,0) + IsNull(I.SecInv,0))*100/IsNull(O.Yield,100) End
Else Case When (Case When (IsNull(M.Maoqty,0) - IsNull(D.Stockqty,0)+IsNull(I.SecInv,0))*100/IsNull(O.Yield,100)<=IsNull(I.MinQty,0) Then
IsNull(I.MinQty,0) Else (IsNull(M.Maoqty,0) - IsNull(D.Stockqty,0)+IsNull(I.SecInv,0))*100/IsNull(O.Yield,100) End)<=IsNull(I.BatchAppendQty,0) Then
IsNull(I.BatchAppendQty,0) Else Case When Convert(int, (Case When (IsNull(M.Maoqty,0) - IsNull(D.Stockqty,0) + IsNull(I.SecInv,0))*100/IsNull(O.Yield,100)<=IsNull(I.MinQty,0) Then
IsNull(I.MinQty,0) Else (IsNull(M.Maoqty,0) - IsNull(D.Stockqty,0) + IsNull(I.SecInv,0))*100/IsNull(O.Yield,100) End))%Convert(int,Case When IsNull(I.BatchAppendQty,0)=0 Then 1 Else IsNull(I.BatchAppendQty,0) End)=0
Then (Case When (IsNull(M.Maoqty,0) - IsNull(D.Stockqty,0) +IsNull(I.SecInv,0))*100/IsNull(O.Yield,100)<=IsNull(I.MinQty,0) Then
IsNull(I.MinQty,0) Else (IsNull(M.Maoqty,0) - IsNull(D.Stockqty,0)+IsNull(I.SecInv,0))*100/IsNull(O.Yield,100) End)
Else ( (Case When (IsNull(M.Maoqty,0) - IsNull(D.Stockqty,0) + IsNull(I.SecInv,0))*100/IsNull(O.Yield,100)<=IsNull(I.MinQty,0) Then
IsNull(I.MinQty,0) Else (IsNull(M.Maoqty,0) - IsNull(D.Stockqty,0) + IsNull(I.SecInv,0))*100/IsNull(O.Yield,100) End)/Case When IsNull(I.BatchAppendQty,0)=0 Then 1 Else IsNull(I.BatchAppendQty,0) End+1)*IsNull(I.BatchAppendQty,0)
End End End)*IsNull(O.Yield,100) + IsNull(D.Stockqty,0) - IsNull(M.Maoqty,0)
Else (IsNull(D.Stockqty,0) - IsNull(M.Maoqty,0)) End As Stockqty, 0 As PlanIn,
Case When (IsNull(M.Maoqty,0)-IsNull(D.Stockqty,0))>0 Then (IsNull(M.Maoqty,0)-IsNull(D.Stockqty,0))+IsNull(I.SecInv,0)
Else 0 End As NeedQty,
0 As PlanNum,0 As PlanPoNum,
Case When (@FirstI+1-M.LeadTime)<=0 then @aStartDate
Else (Select StartDate From B_TimeCircle Where Sn=@FirstI+1-M.LeadTime)
End ,M.LeadTime,1 As Flag
From #NextqtyA M Left Join
(Select ItemNo,Stockqty From W_MRPData Where CalcuNo = @CalcuNo And Flag = 1
And TimeArea=@FirstI) D On M.ItemNo=D.ItemNo
Left Join (Select ItemNo,MinQty,BatchAppendQty,SecInv From VB_Items) I On M.ItemNo = I.ItemNo
Left Join (Select Distinct Yield,ItemNo From B_ItemBomMas) O On M.ItemNo = O.ItemNo
Where M.NeedDate >= @aStartDate And M.NeedDate <= @aEndDate
If @@Error <> 0
Begin
Set @Returnid = 0
Set @ErrMsg = 'MRP計算插入數據出錯﹐請與電腦部聯系！'
GoTo ExitLable
End
End
-- For Purchase
Select @Count = 0
Select @aCount = 0
Select @Count = Count(*)
From #TimeArea2
Select @aCount = Count(*)
From #ItemCount
If @Count <> @aCount
Begin
Insert W_MRPData(CalcuNo,TimeArea,ItemNo,PartNo,PartName,Model,VendorNo,Vendor,Maoqty,
Stockqty,PlanIn,Needqty,PlanNum,PlanPoNum,NeedDate,LeadTime,Flag)
Select @CalcuNo,(@FirstI+1) As TimeArea,M.ItemNO,M.PartNo,M.PartName,M.Model,M.VendorNo,
M.Vendor,0 As Maoqty,Case When (IsNull(D.Stockqty,0)+IsNull(F.VPoqs,0))>0 Then (IsNull(D.Stockqty,0)+IsNull(F.VPoqs,0)) Else 0 End Stockqty ,
IsNull(F.VPoqs,0) As PlanIn,0 As Needqty,0 As PlanNum ,0 As PlanPoNum,@aStartDate, 0,0 As Flag
From #ItemCount M Left Join W_MRPData D
On (M.CalcuNo=D.CalcuNo And M.ItemNo=D.ItemNo And D.TimeArea=@FirstI And D.Flag = 0)
Left Join #Futureqty F On M.ItemNo=F.ItemNo
If @@Error <> 0
Begin
Set @Returnid = 0
Set @ErrMsg = 'MRP計算插入數據出錯﹐請與電腦部聯系！'
GoTo ExitLable
End
Update W_MRPData Set Maoqty = IsNull(N.Maoqty,0),Needqty=IsNull(N.Needqty,0),Stockqty=IsNull(N.Stockqty,0),
LeadTime=IsNull(N.LeadTime,0), PlanIn = IsNull(N.PlanIn,0),PlanPoNum=IsNull(N.PlanPoNum,0)
From W_MRPData M Inner Join(Select ItemNo, Maoqty,Needqty,Stockqty,PlanIn,LeadTime,
PlanPoNum From #TimeArea2 )N On M.ItemNo = N.ItemNo
Where CalcuNo = @CalcuNo And TimeArea = @FirstI + 1 And Flag = 0
If @@Error <> 0
Begin
Set @Returnid = 0
Set @ErrMsg = 'MRP計算修改數據出錯﹐請與電腦部聯系！'
GoTo ExitLable
End
End
Else
Begin
Insert W_MRPData(CalcuNo,TimeArea,ItemNo,PartNo,PartName,Model,VendorNo,Vendor,Maoqty,
Stockqty,PlanIn,Needqty,PlanNum,PlanPoNum,NeedDate,LeadTime,Flag)
Select CalcuNo, (@FirstI + 1) As TimeArea, ItemNO,PartNo,PartName,Model,VendorNo,Vendor,
Maoqty, Case When IsNull(Stockqty,0)<=0 Then 0 Else IsNull(Stockqty,0) End ,
PlanIn, Needqty,0 As PlanNum,PlanPoNum,NeedDate,LeadTime, 0 As Flag
From #TimeArea2
If @@Error <> 0
Begin
Set @Returnid = 0
Set @ErrMsg = 'MRP計算插入數據出錯﹐請與電腦部聯系！'
GoTo ExitLable
End
End
Drop table #NextqtyA
Drop table #Nextqty
Drop table #Futureqty
Drop table #TimeArea2
End
Select @FirstI = @FirstI + 1
Fetch Next From Time_Result Into @aStartDate, @aEndDate
End
Close Time_Result
DeAllocate Time_Result
Drop table #T2
Drop table #ItemCount
Drop table #SelfCount
--取得淨需求量﹐計劃訂貨量﹐計劃訂單下達
Declare @aTimeArea Int
Declare @aItemNo Varchar(30)
Declare @Needqty Decimal(20,5)
Declare @aLeadTime Int
Declare @bCount Int
Select @bCount = Count(*)
From W_MRPData
Where CalcuNo = @CalcuNo
And PlanPoNum > 0 And Flag = 0
If @bCount = 0
Begin
Set @Returnid = 1
Set @ErrMsg = 'MRP運算完畢！'
GoTo ExitLable
End
Else
Begin
Select TimeArea,ItemNo,PlanPoNum,Convert(Int,LeadTime) LeadTime
Into #T8
From W_MRPData
Where CalcuNo = @CalcuNo
And PlanPoNum > 0 And Flag = 0
Order by ItemNo,TimeArea
Declare Update_table Cursor For Select TimeArea,ItemNo,PlanPoNum,LeadTime From #T8
Open Update_table
Fetch Next From Update_table Into @aTimeArea, @aItemNo ,@Needqty,@aLeadTime
While @@Fetch_Status = 0
Begin
Select @bCount = Count( *) From W_MRPData
Where CalcuNo = @CalcuNo
And ItemNo = @aItemNo
And TimeArea = @aTimeArea - @aLeadTime
And Flag = 0
If @bCount > 0
Begin
If (@aLeadTime <> 0)
Begin
Update W_MRPData Set PlanPoNum = IsNull(PlanPoNum,0) + IsNull(@Needqty,0)
Where CalcuNo = @CalcuNo
And ItemNo = @aItemNo
And TimeArea = @aTimeArea - @aLeadTime
And Flag = 0
Update W_MRPData Set PlanPoNum = 0
Where CalcuNo = @CalcuNo
And ItemNo = @aItemNo
And TimeArea = @aTimeArea
And Flag = 0
End
End
Else
Begin
If @aTimeArea<>1
Begin
Update W_MRPData Set PlanPoNum = IsNull(PlanPoNum,0) + IsNull(@Needqty,0)
Where CalcuNo = @CalcuNo
And ItemNo = @aItemNo
And TimeArea = 1
And Flag = 0
Update W_MRPData Set PlanPoNum = 0
Where CalcuNo = @CalcuNo
And ItemNo = @aItemNo
And TimeArea = @aTimeArea
And Flag = 0
End
End
If @@Error <> 0
Begin
Set @Returnid = 0
Set @ErrMsg = 'MRP計算插入數據出錯﹐請與電腦部聯系！'
GoTo ExitLable
End
Fetch Next From Update_table Into @aTimeArea, @aItemNo ,@Needqty,@aLeadTime
End
Close Update_table
DeAllocate Update_table
Set @Returnid = 1
Set @ErrMsg = 'MRP運算完畢！'
GoTo ExitLable
End
-----------------------------------------------------------------------------------------------------------------------------
ExitLable:
If @Returnid = 0
Begin
ROLLBACK TRANSACTION
End
Else
Begin
COMMIT TRANSACTION
Drop table #TA1
Drop table #T5
Drop table #T6
Drop table #Result1
Drop table #Result2
Drop table #SelfMasterResult1
Drop table #SelfMasterResult2
End
GO
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON
GO