akka-typed(5) - cluster：集羣節點狀態監視

原創 TIGER_XC 2020-06-28 00:36

   akka-cluster對每個節點的每種狀態變化都會在系統消息隊列裏發佈相關的事件。通過訂閱有關節點狀態變化的消息就可以獲取每個節點的狀態。這部分已經在之前關於akka-cluster的討論裏介紹過了。由於akka-typed裏採用了新的消息交流協議，而系統消息的發佈和訂閱也算是消息交換，也受交流協議約束。所以想通過重寫以前示範的ClusterMemberStatus來了解一下akka-typed環境下節點狀態變化消息監聽的一些機制。

我們需要一個actor來訂閱系統發佈的節點狀態變化消息。這裏涉及到系統、actor兩端的信息交流。假設向系統訂閱是一種消息的發送，那麼得到的節點狀態變化消息就是系統的response了。先看看actor裏的消息定義：

object MonitorActor {
  sealed trait ClusterEvent
  private case class MemberStatus(event: MemberEvent) extends ClusterEvent
  private case class ReachStatus(event: ReachabilityEvent) extends ClusterEvent

  def apply(): Behavior[ClusterEvent] = Behaviors.setup[ClusterEvent] { ctx =>
    val memberEventAdapter: ActorRef[MemberEvent] = ctx.messageAdapter(MemberStatus)
    val reachEventAdapter: ActorRef[ReachabilityEvent] = ctx.messageAdapter(ReachStatus)
    Cluster(ctx.system).subscriptions ! Subscribe(memberEventAdapter,classOf[MemberEvent])
    Cluster(ctx.system).subscriptions ! Subscribe(reachEventAdapter,classOf[ReachabilityEvent])

...
}

首先，response 分爲 MemberEvent, ReachabilityEvent兩種。MonitorActor處理的消息類型是ClusterEvent。爲了處理系統返回的response類型，即MemberEvent,ReachabilityEvent，必須提供這兩種類型到ClusterEvent的轉換。通過ctx.messageAdapter登記MemberEvent -> MemberStatus, ReachabilityEvent -> ReachStatus兩種類型轉換機制使MonitorActor可以接收到MemberStatus, ReachStatus兩種消息：

object MonitorActor {
  sealed trait ClusterEvent
  private case class MemberStatus(event: MemberEvent) extends ClusterEvent
  private case class ReachStatus(event: ReachabilityEvent) extends ClusterEvent

  def apply(): Behavior[ClusterEvent] = Behaviors.setup[ClusterEvent] { ctx =>
    val memberEventAdapter: ActorRef[MemberEvent] = ctx.messageAdapter(MemberStatus)
    val reachEventAdapter: ActorRef[ReachabilityEvent] = ctx.messageAdapter(ReachStatus)
    Cluster(ctx.system).subscriptions ! Subscribe(memberEventAdapter,classOf[MemberEvent])
    Cluster(ctx.system).subscriptions ! Subscribe(reachEventAdapter,classOf[ReachabilityEvent])
    Behaviors.receiveMessage { event =>
      event match {
        case MemberStatus(status) =>
          status match {
            case MemberJoined(member) =>
              ctx.log.info("**************** Member joined: [{}] ***************", member.address)
            case MemberJoined(member) =>
              ctx.log.info("**************** Member joined: [{}] ***************", member.address)
            case MemberUp(member) =>
              ctx.log.info("**************** Member is Up: [{}] ***************", member.address)
            case MemberRemoved(member, previousStatus) =>
              ctx.log.info("**************** Member is Removed: [{}] after {} ***************",
                member.address, previousStatus)
            case MemberLeft(member) =>
              ctx.log.info("**************** Member left: [{}] ***************", member.address)
            case MemberExited(member) =>
              ctx.log.info("**************** Member exited: [{}] ***************", member.address)
            case _: MemberEvent => // ignore
          }
        case ReachStatus(status) =>
            status match {
              case UnreachableMember(member) =>
                ctx.log.info("**************** Member detected as unreachable: [{}] ***************", member)
              case ReachableMember(member) =>
                ctx.log.info("**************** Member back to reachable: [{}] ***************", member)
            }
      }
      Behaviors.same
    }
  }
}

還需要一個actor, 什麼都不幹。存粹構建一個MonitorActor：

object RootActor {
  def apply(): Behavior[Nothing] = Behaviors.setup[Nothing] {ctx =>
     ctx.spawn(MonitorActor(),"listner")
     Behaviors.empty
  }
}

好了，看看main是怎麼實現的吧：

object ClusterMemberStatus {
  import com.typesafe.config.ConfigFactory
  def main(args: Array[String]): Unit = {
    val ports =
      if (args.isEmpty)
        Seq(25251, 25252, 0)
      else
        args.toSeq.map(_.toInt)
    ports.foreach { port =>
      startup(port)
    }

  }

  def startup(port: Int): Unit = {
    val config = ConfigFactory.parseString(s"""
      akka.remote.artery.canonical.port=$port
      """).withFallback(ConfigFactory.load("cluster.conf"))
    ActorSystem[Nothing](RootActor(),"ClusterSystem",config)
  }

}

下面是測試結果顯示：

22:14:52.755 [ClusterSystem-akka.actor.default-dispatcher-3] INFO com.learn.akka.MonitorActor$ - **************** Member is Up: [akka://[email protected]:25251] ***************
22:14:52.810 [ClusterSystem-akka.actor.default-dispatcher-3] INFO akka.cluster.Cluster - Cluster Node [akka://[email protected]:51081] - Received InitJoinAck message from [Actor[akka://[email protected]:25251/system/cluster/core/daemon#313431252]] to [akka://[email protected]:51081]
22:14:52.825 [ClusterSystem-akka.actor.default-dispatcher-3] INFO akka.cluster.Cluster - Cluster Node [akka://[email protected]:25251] - Node [akka://[email protected]:51081] is JOINING, roles [dc-default]
22:14:52.825 [ClusterSystem-akka.actor.default-dispatcher-3] INFO com.learn.akka.MonitorActor$ - **************** Member joined: [akka://[email protected]:51081] ***************
22:14:52.829 [ClusterSystem-akka.actor.internal-dispatcher-7] DEBUG akka.cluster.typed.internal.receptionist.ClusterReceptionist - ClusterReceptionist [akka://[email protected]:25251] - Node added [UniqueAddress(akka://[email protected]:51081,567025403336682144)]
22:14:52.858 [ClusterSystem-akka.actor.default-dispatcher-3] INFO akka.cluster.Cluster - Cluster Node [akka://[email protected]:51081] - Welcome from [akka://[email protected]:25251]
22:14:52.858 [ClusterSystem-akka.actor.default-dispatcher-3] INFO com.learn.akka.MonitorActor$ - **************** Member is Up: [akka://[email protected]:25251] ***************
22:14:52.858 [ClusterSystem-akka.actor.default-dispatcher-3] INFO com.learn.akka.MonitorActor$ - **************** Member joined: [akka://[email protected]:51081] ***************
22:14:52.858 [ClusterSystem-akka.actor.internal-dispatcher-13] DEBUG akka.cluster.typed.internal.receptionist.ClusterReceptionist - ClusterReceptionist [akka://[email protected]:51081] - Node added [UniqueAddress(akka://[email protected]:25251,6076326462170320177)]
22:14:53.044 [ClusterSystem-akka.actor.default-dispatcher-3] INFO akka.cluster.Cluster - Cluster Node [akka://[email protected]:25251] - Leader is moving node [akka://[email protected]:51081] to [Up]
22:14:53.044 [ClusterSystem-akka.actor.default-dispatcher-3] INFO com.learn.akka.MonitorActor$ - **************** Member is Up: [akka://[email protected]:51081] ***************
22:14:53.679 [ClusterSystem-akka.actor.default-dispatcher-3] INFO com.learn.akka.MonitorActor$ - **************** Member is Up: [akka://[email protected]:51081] ***************
22:14:57.707 [ClusterSystem-akka.actor.default-dispatcher-3] INFO akka.cluster.Cluster - Cluster Node [akka://[email protected]:25251] - Received InitJoin message from [Actor[akka://[email protected]:25252/system/cluster/core/daemon/joinSeedNodeProcess-1#1472023843]] to [akka://[email protected]:25251]
22:14:57.707 [ClusterSystem-akka.actor.default-dispatcher-3] INFO akka.cluster.Cluster - Cluster Node [akka://[email protected]:25251] - Sending InitJoinAck message from node [akka://[email protected]:25251] to [Actor[akka://[email protected]:25252/system/cluster/core/daemon/joinSeedNodeProcess-1#1472023843]] (version [2.6.5])
22:14:57.732 [ClusterSystem-akka.actor.default-dispatcher-3] INFO akka.cluster.Cluster - Cluster Node [akka://[email protected]:25252] - Received InitJoinAck message from [Actor[akka://[email protected]:25251/system/cluster/core/daemon#313431252]] to [akka://[email protected]:25252]
22:14:57.734 [ClusterSystem-akka.actor.default-dispatcher-3] INFO akka.cluster.Cluster - Cluster Node [akka://[email protected]:25251] - Node [akka://[email protected]:25252] is JOINING, roles [dc-default]
22:14:57.735 [ClusterSystem-akka.actor.default-dispatcher-3] INFO com.learn.akka.MonitorActor$ - **************** Member joined: [akka://[email protected]:25252] ***************
22:14:57.735 [ClusterSystem-akka.actor.internal-dispatcher-26] DEBUG akka.cluster.typed.internal.receptionist.ClusterReceptionist - ClusterReceptionist [akka://[email protected]:25251] - Node added [UniqueAddress(akka://[email protected]:25252,-6913064885699273532)]
22:14:57.737 [ClusterSystem-akka.actor.default-dispatcher-3] INFO akka.cluster.Cluster - Cluster Node [akka://[email protected]:25252] - Welcome from [akka://[email protected]:25251]
22:14:57.737 [ClusterSystem-akka.actor.default-dispatcher-3] INFO com.learn.akka.MonitorActor$ - **************** Member is Up: [akka://[email protected]:25251] ***************
22:14:57.738 [ClusterSystem-akka.actor.internal-dispatcher-30] DEBUG akka.cluster.typed.internal.receptionist.ClusterReceptionist - ClusterReceptionist [akka://[email protected]:25252] - Node added [UniqueAddress(akka://[email protected]:25251,6076326462170320177)]
22:14:57.738 [ClusterSystem-akka.actor.default-dispatcher-3] INFO com.learn.akka.MonitorActor$ - **************** Member joined: [akka://[email protected]:25252] ***************
22:14:57.738 [ClusterSystem-akka.actor.default-dispatcher-3] INFO com.learn.akka.MonitorActor$ - **************** Member is Up: [akka://[email protected]:51081] ***************
22:14:57.738 [ClusterSystem-akka.actor.internal-dispatcher-30] DEBUG akka.cluster.typed.internal.receptionist.ClusterReceptionist - ClusterReceptionist [akka://[email protected]:25252] - Node added [UniqueAddress(akka://[email protected]:51081,567025403336682144)]
22:14:57.740 [ClusterSystem-akka.actor.default-dispatcher-3] INFO com.learn.akka.MonitorActor$ - **************** Member joined: [akka://[email protected]:25252] ***************
22:14:57.740 [ClusterSystem-akka.actor.internal-dispatcher-16] DEBUG akka.cluster.typed.internal.receptionist.ClusterReceptionist - ClusterReceptionist [akka://[email protected]:51081] - Node added [UniqueAddress(akka://[email protected]:25252,-6913064885699273532)]
22:14:58.134 [ClusterSystem-akka.actor.default-dispatcher-3] INFO akka.cluster.Cluster - Cluster Node [akka://[email protected]:25251] - Leader is moving node [akka://[email protected]:25252] to [Up]
22:14:58.134 [ClusterSystem-akka.actor.default-dispatcher-3] INFO com.learn.akka.MonitorActor$ - **************** Member is Up: [akka://[email protected]:25252] ***************
22:14:58.755 [ClusterSystem-akka.actor.default-dispatcher-3] INFO com.learn.akka.MonitorActor$ - **************** Member is Up: [akka://[email protected]:25252] ***************
22:14:59.146 [ClusterSystem-akka.actor.default-dispatcher-14] INFO com.learn.akka.MonitorActor$ - **************** Member is Up: [akka://[email protected]:25252] ***************

下面是本次示範的全部源代碼：

build.sbt

name := "learn-akka-typed"

version := "0.1"

scalaVersion := "2.13.1"
scalacOptions in Compile ++= Seq("-deprecation", "-feature", "-unchecked", "-Xlog-reflective-calls", "-Xlint")
javacOptions in Compile ++= Seq("-Xlint:unchecked", "-Xlint:deprecation")

val AkkaVersion = "2.6.5"
val AkkaPersistenceCassandraVersion = "1.0.0"


libraryDependencies ++= Seq(
  "com.typesafe.akka" %% "akka-cluster-sharding-typed" % AkkaVersion,
  "com.typesafe.akka" %% "akka-persistence-typed" % AkkaVersion,
  "com.typesafe.akka" %% "akka-persistence-query" % AkkaVersion,
  "com.typesafe.akka" %% "akka-serialization-jackson" % AkkaVersion,
  "com.typesafe.akka" %% "akka-persistence-cassandra" % AkkaPersistenceCassandraVersion,
  "com.typesafe.akka" %% "akka-slf4j" % AkkaVersion,
  "ch.qos.logback"     % "logback-classic"             % "1.2.3"
)

cluster.conf

akka {
  actor {
    provider = cluster

    serialization-bindings {
      "com.learn.akka.CborSerializable" = jackson-cbor
    }
  }
  remote {
    artery {
      canonical.hostname = "127.0.0.1"
      canonical.port = 0
    }
  }
  cluster {
    seed-nodes = [
      "akka://[email protected]:25251",
      "akka://[email protected]:25252"]
  }
}

ClusterMemberStatus.scala

package com.learn.akka
import akka.actor.typed._
import akka.actor.typed.scaladsl.Behaviors
import akka.cluster.ClusterEvent._
import akka.cluster.typed.Subscribe
import akka.cluster.typed.Cluster
import akka.actor.typed.ActorSystem

object MonitorActor {
  sealed trait ClusterEvent
  private case class MemberStatus(event: MemberEvent) extends ClusterEvent
  private case class ReachStatus(event: ReachabilityEvent) extends ClusterEvent

  def apply(): Behavior[ClusterEvent] = Behaviors.setup[ClusterEvent] { ctx =>
    val memberEventAdapter: ActorRef[MemberEvent] = ctx.messageAdapter(MemberStatus)
    val reachEventAdapter: ActorRef[ReachabilityEvent] = ctx.messageAdapter(ReachStatus)
    Cluster(ctx.system).subscriptions ! Subscribe(memberEventAdapter,classOf[MemberEvent])
    Cluster(ctx.system).subscriptions ! Subscribe(reachEventAdapter,classOf[ReachabilityEvent])
    Behaviors.receiveMessage { event =>
      event match {
        case MemberStatus(status) =>
          status match {
            case MemberJoined(member) =>
              ctx.log.info("**************** Member joined: [{}] ***************", member.address)
            case MemberJoined(member) =>
              ctx.log.info("**************** Member joined: [{}] ***************", member.address)
            case MemberUp(member) =>
              ctx.log.info("**************** Member is Up: [{}] ***************", member.address)
            case MemberRemoved(member, previousStatus) =>
              ctx.log.info("**************** Member is Removed: [{}] after {} ***************",
                member.address, previousStatus)
            case MemberLeft(member) =>
              ctx.log.info("**************** Member left: [{}] ***************", member.address)
            case MemberExited(member) =>
              ctx.log.info("**************** Member exited: [{}] ***************", member.address)
            case _: MemberEvent => // ignore
          }
        case ReachStatus(status) =>
            status match {
              case UnreachableMember(member) =>
                ctx.log.info("**************** Member detected as unreachable: [{}] ***************", member)
              case ReachableMember(member) =>
                ctx.log.info("**************** Member back to reachable: [{}] ***************", member)
            }
      }
      Behaviors.same
    }
  }
}
object RootActor {
  def apply(): Behavior[Nothing] = Behaviors.setup[Nothing] {ctx =>
     ctx.spawn(MonitorActor(),"listner")
     Behaviors.empty
  }
}
object ClusterMemberStatus {
  import com.typesafe.config.ConfigFactory
  def main(args: Array[String]): Unit = {
    val ports =
      if (args.isEmpty)
        Seq(25251, 25252, 0)
      else
        args.toSeq.map(_.toInt)
    ports.foreach { port =>
      startup(port)
    }

  }

  def startup(port: Int): Unit = {
    val config = ConfigFactory.parseString(s"""
      akka.remote.artery.canonical.port=$port
      """).withFallback(ConfigFactory.load("cluster.conf"))
    ActorSystem[Nothing](RootActor(),"ClusterSystem",config)
  }

}

 

發表評論
所有評論
還沒有人評論，想成為第一個評論的人麼? 請在上方評論欄輸入並且點擊發布.
相關文章

怎樣成爲一個合格的程序員

成爲程序員就意味着要開啓程序生涯，開始敲代碼，如果說做程序員僅僅爲了高工資，那麼就不必做了。一天天干坐着只爲等工資那麼奉勸你，另謀高就。   學編程應該在編程中感受到快樂，不然每天對着沒有表情的字母，很是枯燥，代碼編輯很需要謹慎切記不能粗

weixin_45820912 2020-07-08 00:05:15

Java近期新聞綜述：MicroProfile 4.1、Spring Boot更新、Kotlin、Scala、OpenJDK、Liberica JDK

{"type":"doc","content":[{"type":"paragraph","attrs":{"indent":0,"number":0,"align":null,"origin":null},"content":[{"typ

Michael Redlich 2021-08-13 11:29:03

InfoQ 編程語言 2 月排行榜，更好的投票活動來了

{"type":"doc","content":[{"type":"paragraph","attrs":{"indent":0,"number":0,"align":null,"origin":null},"content":[{"typ

InfoQ 中文站 2021-03-22 18:34:58

Spark(Persist)

RDD的持久化 可以使用persist(StorageLevel)或者cache()方法，數據會在第一次計算後緩存在各節點的內存裏 Spark的緩存具有容錯機制，如果RDD中的任何一個緩存分區丟失，Spark會按照原來的計算過程自動地重新

原創 2021-01-30 10:04:50

Scala基礎-語法特性(一)：類型和變量

{"type":"doc","content":[{"type":"heading","attrs":{"align":null,"level":2},"content":[{"type":"text","text":"統一類型"}]},{

大规模数据处理学习者 2020-11-14 16:44:00

Java的新未來：逐漸“Kotlin化”

來自不同編程語言的競爭正促使Java不斷吸收新特性，變得更能適應時代和開發人員的新需求。 本文最初發表於 The Bored Dev網站，經原作者授權由InfoQ中文站翻譯並分享。我們行業始終有一個熱門話題，那就是對Java的批判，這種批

The Bored Dev 2020-08-17 08:03:49

【Java 基礎】-- 爲什麼需要實現 Serializable 接口

1、什麼是序列化      序列化：將對象寫入到IO流中    反序列化：從IO流中恢復對象        補充：    Serializable 是一個空接口，它的目的僅是標識一個類的對象可以被序列化。    Java 提供的一種高效機

highfei2011 2020-07-07 16:04:44

Scala_(2)_面向對象

1.類 class HiScala{ private var name="Spark" def sayName(){...} def getName = name } 創建實例：new HiScala 暴露get 方法

imarklei 2020-07-07 15:16:54

Scala_(1)_基礎

1.函數 sum(1 to 100:_*)// 提取出1-100中的所有元素,並實現sum操作 2.lazy 只有在初次運行時調用 如：lazy val content = fromFile(path) 3.集合 val a

imarklei 2020-07-07 15:16:54

Scala中apply方法與unapply方法

通常，在一個類的伴生對象中定義apply方法，在生成這個類的對象時，就省去了new關鍵字。 class Currency(val value: Double, val unit: String) { } object Currenc

坚持吧骚年 2020-07-06 19:48:30

Scala case class

Case Class一般被翻譯成樣例類，它是一種特殊的類，能夠被優化以用於模式匹配，下面的代碼定義了一個樣例類： //抽象類Person abstract class Person //case class Student case

坚持吧骚年 2020-07-06 19:48:20

面試官問：爲什麼說使用繼承代碼的擴展性和維護性提高了？

應答技巧如下圖： B類繼承了A類，C類繼承了B類 答：加入說我們現在想讓B和C同時擁有某個方法或者屬性，我們就可以在A類中直接添加，讓B和C同時具有這個方法和屬性，這就同時體現了代碼的擴展性和維護性。

@我是菜鸟。 2020-07-06 17:19:21

Scala之遞歸的兩個小練習

1. 求斐波那契數 package com.atguigu.chapter05.fun import scala.io.StdIn object Exercise01 { def main(args: Array[Stri

@我是菜鸟。 2020-07-06 17:19:21

Scala程序設計基礎（三）

目錄面向對象編程類構造器對象伴生對象apply方法main方法繼承抽象類匿名內部類isInstanceOfgetClass訪問修飾符private[this]protected[this]特質模板模式trait構造機制模式匹配樣例

Roy瑞士 2020-07-06 15:48:54

Scala程序設計基礎（四）

目錄異常處理提取器泛型上下界協變逆變非變隱式轉換和隱式參數結語 異常處理 類似Java，使用try..catch捕獲處理異常 不同的是catch中使用模式匹配的思想 try { // 代碼 } catch {

Roy瑞士 2020-07-06 15:48:54