1.ns-3開發環境配置
sudo apt-get install gcc g++ python
sudo apt-get install mercurial
sudo apt-get install bzr
sudo apt-get install gdb valgrind
sudo apt-get install gsl-bin libgsl0-dev libgsl0ldbl
sudo apt-get install flex bison
sudo apt-get install tcpdump
sudo apt-get install sqlite sqlite3 sqlite3-dev
sudo apt-get install libxml2 libxml2-dev
sudo apt-get install libgtk2.0-0 libgtk2.0-dev
sudo apt-get install vtun lxc
sudo apt-get install uncrustify
sudo apt-get install doxygen graphviz imagemagick
sudo apt-get install texinfo dia texlive-latex-extra texlive-extra-utils texlive-generic-recommended
sudo apt-get install python-pygraphviz python-kiwi python-pygoocanvas libgoocanvas-dev
sudo apt-get install libboost-signals-dev libboost-filesystem-dev
2.ns-3源碼獲取
下載ns-3源碼壓縮包，下載網址爲https://www.nsnam.org/releases/，下載壓縮包文件名爲ns-allinone-3.25.tar.bz2
在Linux系統的文件目錄下創建文件夾tarballs
cd
mkdir tarballs
將已下載好的源碼壓縮文件ns-allinone-3.25.tar.bz2拷貝到tarballs文件夾下
進入tarballs文件夾，對ns-allinone-3.25.tar.bz2解壓縮
cd tarballs
tar xjf ns-allinone-3.25.tar.bz2
3.使用build.py編譯ns-3
cd ns-allinone-3.25
./build.py
4.使用Waf編譯腳本
將需要編譯的腳本文件拷貝至scratch文件夾內，如文件scratch-simulator
cd ns-3.25
./waf
5.運行腳本
./waf -run scratch-simulator