這兩天領導小黑(IBM Thinkpad T410)突然莫名其妙地“生病”了—— Ati2dvag 藍屏，每當重啓或者待機後都會藍屏。刪除顯卡驅動後,一切正常.怎麼辦?總不能讓它在無驅下工作吧.藍屏信息:
A problem has been detected and windows has been shut down to pevent damage to your computer.
The problem seems to be caused by the following file:ati2dvag
If this is the first time you've seen this stop error screen,restart your computer.If this screen appears again,follow these step:
The devices drivers got stuck in an infinite loop.This usually indicates problem with device itself or with the device driver programming the hardware incorrectly.
Please check with your hardware device vendor for any driver updates
Techical informations:
*** STOP 0x0000000A(0x8289BA10,0x825A9008,0xF88DFCB4,0x00000001)
ati2dvag
The problem seems to be caused by the following file:ati2dvag
If this is the first time you've seen this stop error screen,restart your computer.If this screen appears again,follow these step:
The devices drivers got stuck in an infinite loop.This usually indicates problem with device itself or with the device driver programming the hardware incorrectly.
Please check with your hardware device vendor for any driver updates
Techical informations:
*** STOP 0x0000000A(0x8289BA10,0x825A9008,0xF88DFCB4,0x00000001)
ati2dvag
經過無數次的測試，換裝 n 個 ATI 驅動，重裝了 n 次操作系統，拆卸內存條等等，均一無所獲。一連幾天陷入噩夢般的藍屏、重啓的死循環中……
在google了無數個網站之後,算在國外某站點找到解決方案，記錄一下，免得其他兄弟被鬱悶到...
不需要卸載你的顯卡驅動，按 F8 進入安全模式，然後以下步驟操作。(Windows XP)
1. 啓動 "設備管理器"。
2. 在系統設備中，選擇 "Intel(R) ... Processor to AGP Controller..."。
3. 右鍵菜單，選擇 "更新驅動程序"。
4. 不要從 Windows Update 更新，繼續下一步。
5. 對話框中選擇 "從列表或指定位置安裝(高級)"，下一步。
6. 選擇 "不要搜索。我要自己選擇要安裝的驅動程序"，下一步。
7. 選擇 "PCI Standard PCI-to-PCI bridge"，下一步，安裝驅動程序。
8. 重啓系統。OK。
2. 在系統設備中，選擇 "Intel(R) ... Processor to AGP Controller..."。
3. 右鍵菜單，選擇 "更新驅動程序"。
4. 不要從 Windows Update 更新，繼續下一步。
5. 對話框中選擇 "從列表或指定位置安裝(高級)"，下一步。
6. 選擇 "不要搜索。我要自己選擇要安裝的驅動程序"，下一步。
7. 選擇 "PCI Standard PCI-to-PCI bridge"，下一步，安裝驅動程序。
8. 重啓系統。OK。
原因我也不清楚...！！！！