提交論文以後遇到各種格式上的問題,反覆提交了好多次。總結一下幾個小問題的解決方法,以免遺忘。
最後一頁reference沒寫滿,兩欄要保證一樣長
解決方法: \usepackage{balance} and include \balance between \bibliographystyle and \bibliography
eg.
\bibliographystyle{ACM-Reference-Format}
\balance
\bibliography{bibfile}
SIGIR模板中每一頁會有頁眉,顯示論文名、會議名和作者名。
解決方法: 使用\fancyhead{}去掉。放在\title之前。
字體未嵌入
問題:1. Attached is a pdf report indicating there are type 3 fonts and non-embedded fonts in your submitted pdf. Type 3 fonts are not allowed in material appearing in the ACM DL. Please create a good pdf with all Type 1 or TrueType fonts embedded as required by the ACM DL. Please see: https://tex.stackexchange.com/questions/18687/how-to-generate-pdf-without-any-type3-fonts. Some of the type 3 fonts may be in images/figures, these will also need to be rectified.
論文中只能使用嵌入的type 1 或者typetrue嵌入字體。
查看方法:adobe acrobat打開pdf文件,ctrl+D 查看屬性-字體,會顯示字體類型。
一般latex編譯後論文正文是沒有未嵌入字體的(有的話可以嘗試使用在線編輯器,比如shareLatex)。圖片或者圖表中的字體容易出現未嵌入字體。一般來說,插入的圖片PDF或圖表PDF是用visio或者origin畫的。
Visio:導出時候選一下PDF/A標準就可以了。
Origin: 嘗試了兩種方法:
- 導出時不管是PDF還是eps,導出時選擇字體adobe type 1 & 內嵌字體,也沒起作用,都是含有未嵌入字體。
- 導出爲PDF,用adobe acrobat另存爲pdf/a標準,字體嵌入了但是某些字消失並且顯示不正常。
最後嘗試了一種暴力方法,直接在origin中ctrl+P用adobe打印,可以在屬性裏設置打印的標準,我試了一下標準、PDF/A的幾種都將字體轉換成了可嵌入字體。