Oracle 11gR2 on Solaris 10安裝技術文檔(原版英文)

Requirements for Installing Oracle 11gR2 RDBMS on Solaris 10 SPARC [ID 964976.1]
修改時間 21-OCT-2011 類型 REFERENCE 狀態 PUBLISHED 
In this Document
Purpose
Scope
Requirements for Installing Oracle 11gR2 RDBMS on Solaris 10 SPARC
References

Applies to:

Oracle Server - Enterprise Edition - Version: 11.2.0.1 to 11.2.0.1 - Release: 11.2 to 11.2
Oracle Solaris on SPARC (64-bit)

Purpose

This note explains the requirements that need to be met for a successful installation of the 11.2 base release on Solaris 10 SPARC 64-bit.
You can download the 11.2 from the following URL but you require a valid OTN account for download.

http://www.oracle.com/technology/software/products/database/oracle11g/112010_sparc64soft.html
or
http://edelivery.oracle.com/

Scope

This procedure is meant for those planning/trying to install Oracle Server 11.2.0.X.0 on Solaris 10 SPARC 64-bit. Please note that the document only lays down the minimum requirements. If your configuration is higher than as mentioned, you have met the pre-installation requirements. You may also need to customize certain parameters depending upon your database/application size which is out of scope of this document.

For any conflicts with this and any other MOS note, please refer to the Oracle documentation as it overrides any information provided here.

You can review the documents related to Installation from the following OTN site.

http://www.oracle.com/pls/db112/portal.portal_db?selected=11&frame=

Requirements for Installing Oracle 11gR2 RDBMS on Solaris 10 SPARC

Requirements for Installing Oracle 11gR2 RDBMS on Solaris SPARC 64-bit

1. Hardware Requirements
* Oracle software requires a minimum of 1024 MB of RAM for successful installation.

* The following table describes the relationship between installed RAM and the configured swap space requirement:

 

RAM	Swap Space
Between 1 GB and 2 GB	1.5 times the size of RAM
Between 2 GB and 16 GB	Equal to the size of RAM
More than 16 GB	16 GB

* 1 GB Mb of free space in /tmp
* The disk space requirements for software files for each installation type:
Enterprise Edition - 4.68 GB
Standard Edition - 4.62 GB
Custom Edition - 4.71 GB (maximum)

* Between 1.5 GB and 2 GB of disk space is required for a preconfigured database that uses file system storage (optional).

2 Software Requirements

Solaris 10 U6 (5.10-2008.10)

Update level can be checked from "/etc/release" file.

Applying a kernel patch or a Solaris patch bundle is not the equivalent to installing the specific Solaris 10 "update 6" p_w_picpath. 11gR2 RDBMS software is only certified for a base install p_w_picpath of Solaris 10 update 6 or greater. For additional detail, please see Document 971464.1, "FAQ - 11gR2 requires Solaris 10 update 6 +"

2.1. Package Requirement
* The following packages (or later versions) must be installed:

SUNWarc
SUNWbtool
SUNWcsl
SUNWhea
SUNWi15cs
SUNWi1cs
SUNWi1of
SUNWlibC
SUNWlibm
SUNWlibms
SUNWsprot
SUNWtoo
SUNWxwfnt

Packages can be checked as:

%/bin/pkginfo -i SUNWarc SUNWbtool SUNWcsl SUNWhea SUNWi15cs SUNWi1cs SUNWi1of SUNWlibC SUNWlibm SUNWlibms SUNWsprot SUNWtoo SUNWxwfnt

2.2.Patch Requirements

For all Installations:

120753-06: SunOS 5.10: Microtasking libraries (libmtsk) patch
139574-03: SunOS 5.10: file crle ldd stings elfdump patch
141444-09
141414-02

If using Pro*C/C++, Pro*FORTRAN, Oracle Call Interface, Oracle C++ Call Interface, Oracle XML Developer's Kit (XDK), then following OS patches are also required:

119963-14: SunOS 5.10: Shared library patch for C++
124861-15: SunOS 5.10 Compiler Common patch for Sun C C++ (optional)

If also using Database Smart Flash Cache (An Enterprise Edition only feature), also install the following OS patches:

125555-03
140796-01
140899-01
141016-01
139555-08
141414-10
141736-05

To determine whether an operating system patch is installed, enter a command similar to the following:

# /usr/sbin/patchadd -p | grep patch_number(without version number)

For example, to determine if any version of the 119963 patch is installed, use the following command:

# /usr/sbin/patchadd -p | grep 120753

 

2.3 Compiler Requirement

Sun One Studio 12 (C and C++ 5.9) is supported with Pro*C/C++, Oracle Call Interface, Oracle C++ Call Interface, and Oracle XML Developer's Kit (XDK) for Oracle Database 11g Release 2.

2.4 Additional requirements

Additionally, the following installation pre-requisites must be met if the specific Oracle product listed is being installed:

Oracle JDBC/OCI Drivers:

JDK 6 Update 10 (Java SE Development Kit 1.6 u10) or JDK 5 (1.5.0_16) with the JNDI extension with the Oracle Java Database Connectivity and Oracle Call Interface drivers. However, these are not mandatory for the database installation. Please note that JDK 1.5.0 is installed with this release.

Oracle Messaging Gateway:

IBM MQSeries V6.0, client and server
Tibco Rendezvous 7.2


3. OS Environment

3.1 Kernel parameters

Solaris 10 uses the resource control facility to implement the System V IPC. However, Oracle recommends that you set both resource control and /etc/system/ parameters. Operating system parameters not replaced by resource controls continue to affect performance and security on Solaris 10 systems.

 

Parameter	Replaced by Resource Control	Minimum Value
noexec_user_stack	NA (can be set in /etc/system only)	1
semsys:seminfo_semmni	project.max-sem-ids	100
semsys:seminfo_semmsl	process.max-sem-nsems	256
shmsys:shminfo_shmmax	project.max-shm-memory	4294967295
shmsys:shminfo_shmmni	project.max-shm-ids	100

Please note that "project.max-shm-memory" represent the maximum shared memory available for a project, so the value for this parameter should be greater than sum of all SGA sizes.

Please refer to the following document for checking/setting kernel parameter values using resource control:

Note 429191.1 Kernel setup for Solaris 10 using project files.

3.2 umask

The 'umask' setting for the "oracle" user has to be 022.

3.3 Hostname

Hostname command should return the fully qualified hostname as shown below:

# hostname
hostname.domainname

3.4 Shell Limits

Oracle recommends that you set shell limits and system configuration parameters as documented below:

Note: The shell limit values in this section are minimum values only. For production database systems, Oracle recommends that you tune these values to optimize the performance of the system. See your operating system documentation for more information on configuring shell limits.

Shell Limit	Recommended Value
TIME	-1 (Unlimited)
FILE	-1 (Unlimited)
DATA	Minimum value: 1048576
STACK	Minimum value: 32768
NOFILES	Minimum value: 4096
VMEMORY	Minimum value: 4194304

To display the current value specified for these shell limits enter the following commands:

# ulimit -t
# ulimit -f
# ulimit -d
# ulimit -s
# ulimit -n
# ulimit -v

Reference the following note for changing the Shell Limits:

Document 1007442.1 How to Set the Ulimit Values for Solaris

 

References

NOTE:1007442.1 - How to Set the Ulimit Values for Solaris
NOTE:429191.1 - Kernel setup for Solaris 10 using project files.
NOTE:971464.1 - FAQ - 11gR2 requires Solaris 10 update 6 or greater