linux 下檢查網線物理鏈接狀態 命令

1 ethtool 網卡名

[root@sexy FreeServerManager]# ethtool eth0
Settings for eth0:
Supported ports: [ TP MII ]
Supported link modes:   10baseT/Half 10baseT/Full 
                       100baseT/Half 100baseT/Full 
                       1000baseT/Half 1000baseT/Full 
Supports auto-negotiation: Yes
Advertised link modes:  10baseT/Half 10baseT/Full 
                       100baseT/Half 100baseT/Full 
                       1000baseT/Half 1000baseT/Full 
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Link partner advertised link modes:  10baseT/Half 10baseT/Full 
                                    100baseT/Half 100baseT/Full 
                                    1000baseT/Full 
Link partner advertised pause frame use: No
Link partner advertised auto-negotiation: Yes
Speed: 1000Mb/s
Duplex: Full
Port: MII
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pumbg
Wake-on: g
Current message level: 0x00000033 (51)
Link detected: yes

2  mii-tool

[root@sexy FreeServerManager]# mii-tool eth0
eth0: negotiated 100baseTx-FD, link ok